Prosilica GB660 Manual de usuario
Prosilica Inc. www.prosilica.com tel: 604.875.8855 fax: 604.875.8856
© 2009 Prosilica Inc. All rights reserved.
prosilica
USER MANUAL
December 14, 2009
GB660
GB660C
GB660-V
GB660C-V
GB660 User Manual 70-0045A-A
Prosilica Inc.
ii
Table of Contents
Table of Contents............................................................................................................................ ii
Introduction.................................................................................................................................1
Precautions ..................................................................................................................................1
Warranty......................................................................................................................................1
Specifications ..............................................................................................................................2
Supported Features......................................................................................................................3
Mechanical ..................................................................................................................................4
Connections.................................................................................................................................7
Cleaning the Sensor...................................................................................................................11
Adjusting the C-mount..............................................................................................................12
Camera Installation....................................................................................................................13
System Optimization.................................................................................................................18
Trouble Shooting.......................................................................................................................20
Addendum......................................................................................................................................21
GB IO Schematic.......................................................................................................................22
Isolated Trigger Schematic........................................................................................................23
Non-isolated Trigger Schematic................................................................................................24
Video Iris Schematic.................................................................................................................25
Trigger Timing Diagram ...........................................................................................................26
Notes on Triggering...................................................................................................................27
GB660 User Manual 70-0045A-A
Prosilica Inc.
1
Introduction
The GB660 series of cameras are single board, 120 frames per second, VGA, Gigabit Ethernet
cameras based on the Sony ICX618ALA and ICX618AQA, EXview HAD CCD sensors.
Precautions
READ INSTALLATION GUIDE CAREFULLY.
This document contains specific information which is necessary for the correct operation and
treatment of this product.
USE ESD PRECAUTIONS WHEN HANDLING PRODUCT.
This camera contains sensitive components which can be damaged if handled incorrectly.
KEEP SHIPPING MATERIAL.
Poor packaging of this product can cause damage during shipping.
VERIFY ALL EXTERNAL CONNECTIONS.
Verify all external connections in terms of voltage levels, power requirements, voltage polarity,
and signal integrity prior to powering this device.
CLEANING.
This product can be damaged by some volatile cleaning agents. Avoid cleaning the image sensor
unless absolutely necessary. Please see instructions on sensor cleaning in this document.
DO NOT EXCEED ENVIRONMENTAL SPECIFICATIONS.
See environmental specifications limits in the Specifications section of this document.
Warranty
Please contact Prosilica.
GB660 User Manual 70-0045A-A
Prosilica Inc.
2
Specifications
Sensor Type
Sony ICX618ALA CCD (ICX618AQA for color)
Sensor Shutter Type
Progressive Interline
Image Resolution
659 x 494 pixels
Pixel Size
5.6μm x 5.6μm
Optical Format
1/4 inch
Lens Mount
C-mount with adjustable back focus (CS-mount available)
Color Sensor Filter Pattern†
Bayer
Full Resolution Frame Rate
119 fps
Frame Rate (320 x 240 ROI)
199 fps
I/O
1 isolated input/output, 1 non-isolated input/output,
1 RS-232 input/output
Power Requirements
Less than 3.0W†† (5V to 16V)†††
Digitization
12 Bits
Trigger latency*
2us for non-isolated I/O, 10us for isolated I/O
Trigger Jitter*
±20ns for non-isolated I/O, ±0.5us for isolated I/O
Tpd*
10ns for non-isolated I/O, 1.3us for isolated I/O
Operating Temperature
0 to 70 Celsius***
Operating Humidity
20 to 80% non-condensing
Weight
53g
Hardware Interface Standard
IEEE 802.3 1000BASE-T, 100BASE-TX
Software Interface Standard
GigE Vision Standard 1.0
Regulatory
RoHS
†Applies to GB660C only.
†† Power consumption will increase with reduced ROI imaging and color interpolation.
††† Nominal operating voltage is 12V. Cameras have been tested at 12V.
* See Notes on Triggering in the Addendum.
***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GB CAMERAS, SPECIAL
CARE IS REQUIRED TO MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE
CAMERA IS TO BE OPERATED IN A WARM ENVIRONMENT, IT IS SUGGESTED THAT THE
CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET AND THAT
THERE IS SUFFICIENT AIR FLOW.
GB660 User Manual 70-0045A-A
Prosilica Inc.
3
Supported Features
Imaging Modes
free-running, external trigger, fixed rate, software trigger
Fixed Rate Control
0.001 fps to maximum frame rate
External Trigger Delay
0 to 60 seconds in 1 microsecond increments
External Trigger Event
rising edge, falling edge, any edge, level high, level low
Exposure Time
10 microseconds to 60 seconds in 1 microsecond increments
Gain
0 to 34dB
Region of Interest (ROI)
independent x and y control with 1 pixel resolution
Horizontal Binning
1 to 8 pixels
Vertical Binning
1 to 16 rows
Pixel Formats
Mono8, Mono16*, Bayer8, Bayer 16, RGB24,
YUV411, YUV422, YUV444,
BGR24, RGBA24, BGRA24
Sync Out Modes
trigger ready, trigger input, exposing, readout, imaging, strobe, GPO
*On monochrome versions only.
GB660 User Manual 70-0045A-A
Prosilica Inc.
4
Mechanical
1.66 42.2
19.10.7569.92.75
16.50.65
0.65 16.5
1.78 45.2
INCHES[MILLIMETERS]
OPTIONS: LANDSCAPE/RIGHT ANGLE CONNECTORS
MODEL: GB660/GB660C
ITEM 2: HALO HFJ11-1G16E-L12RL
ITEM 1: 3M 10214-55G3PC
ITEM 3: SONY ICX618
0.62 15.70.37 9.4
0.93 23.6
1.16 29.5
0.19 4.8
0.37 9.4
2 PLCS TYP
M2.5x0.45
0.63 15.9
0.54 13.6
5.40.21
0.062 1.6
3
0.10 2.50.17 4.3
0.13 3.2
6 PLCS TYP
0.10 2.6
2 PLCS TYP
0.75 19.1
1 2
2.00 50.8
1.80 45.7
1.23 31.2
GB660 User Manual 70-0045A-A
Prosilica Inc.
5
1.78 45.2
2.55 64.7
0.65 16.5
69.92.75
16.50.6542.21.66
0.75 19.1
INCHES[MILLIMETERS]
ITEM 1: 3M 10214-6212PC
ITEM 2: HALO HFJV1-E1G16-L12RL
ITEM 3: SONY ICX618
OPTIONS: LANDSCAPE/VERTICAL CONNECTORS
MODEL: GB660-V/GB660C-V
2
1
45.71.80
9.1
1.23 31.2
0.93 23.6
1.16 29.5
0.63 16
2 PLCS TYP
M2.5x0.45
0.36
2.00 50.8
3
0.13 3.2
6 PLCS TYP
0.10 2.6
2 PLCS TYP
0.75 19.1
0.062 1.6
0.85 21.6
0.65 16.5
0.53 13.5
0.21 5.4
0.62 15.70.37 9.4
0.65 16.5
0.23 5.8
GB660 User Manual 70-0045A-A
Prosilica Inc.
6
INCHES[MILLIMETERS]*Nominal value. This dimension will vary
depending on CCD type.
ADJUSTABLE
C-MOUNT
0.29 7.4
0.45 11.4
0.65 16.5
0.84 *21.3
1.50 38.1
1.28 32.5
GB660 User Manual 70-0045A-A
Prosilica Inc.
7
Connections
1
2
3
4
Figure 1. GB SERIES connection diagram.
GB660 User Manual 70-0045A-A
Prosilica Inc.
8
Item 1: GIGABIT ETHERNET PORT
This port conforms to the IEEE 802.3 1000BASE-T standard for Gigabit Ethernet over copper.
It is recommended that CAT5E or CAT6 compatible cabling and connectors be used for best
performance. Cable lengths up to 100m are supported.
Item 2: General Purpose I/O PORT
PIN 1PIN 7
PIN 8
PIN 14
PIN
FUNCTION
1
12V POWER
2
GND POWER
3
Sync Input 1 - isolated
4
Isolated Ground
5
Sync Output 1 - isolated
6
Video Iris
7
DNC
8
12V POWER
9
GND POWER
10
RS-232 TXD
11
RS-232 RXD
12
Sync Input 2 –non-isolated
13
Sync Output 2 –non-isolated
Figure 2. General Purpose I/O Pin out. Camera
rear view.
14
GND SIGNAL
The General Purpose I/O port uses a 3M 10214-55G3PC (or 3M 10214-6212PC) connector on
the camera side. The mating cable connector is 3M 10114-3000PE with shielded housing 3M
10314-3210-00X (X indicates color preference). This connector can be purchased from Prosilica
or from http://www.digikey.com.
See Addendum for more detail.
DO NOT EXCEED 5.5V ON SIGNAL INPUTS UNLESS OTHERWISE
INDICATED. SYNC INPUT 1 CAN BE DRIVEN FROM A HIGHER VOLTAGE IF
A CURRENT LIMITING RESISTOR IS USED TO LIMIT THE CURRENT TO
LESS THAN 10 MILLIAMPS.
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
