Email - customer@proofcam.com for enquiries
www.proofcam.com
9
8
7
6A protective filmon the lens will affect the video or photographic effect, remove
the protective film before using the dash cam.
Start the engine and the PC 106 will turn on and start recording immediately.
Note - if your vehicle in car power remains on after the car engine has been
turnedoff, you may need to removethe power lead, orturn the PC 106 off using
the power button. This is because if the in car power remains on, the PC 106 will
not know that the engine hasbeen turned off.
If you wish to set the time, or adjust any menu settings, push the OK button,which
will stopthe PC 106 recording, and then push the MENU button to enter the
Menu. There is only one menu level, scroll up and down using the twobuttons in
the left side, and then select the menu items you wish to change by pushingthe
OK button.
You can email customer@proofcam.comor call +44 (0)20 7278 8926 with any
questions orrequests for information.
THE LITIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE
RECYCLED OR DISPOSED OF PROPERLY. USE PROOFCAM DASH
CAM ONLY WITH THE SUPPLIED DC POWER LEAD AND AC ADAPTER
FOR BATTERY CHARGING..
To recycle your PROOFCAM Dash Cam unit, please take it to your local recycling centre.
This product fully satisfies the requirements for CE marking when used in a residential,
commercial or light industrial environment.
This equipment complies with the essential requirements of EU Directive 99/5/EC.
Do not use this product on board aircraft, or in hospitals, without first
obtaining Permission.
›
›
›
›
Battery Warning and Installati
on
Notes
›Always charge using the provided in car charger. Improper handling of the battery
may result in explosion.
Never dismantle or pierce the battery or allow the battery to short-circuit.
Batteries may explode if exposed to naked fire. Never dispose of batteries in a fire.
Dispose of used batteries observing local regulations.
Never replace the battery on your own, have the dealer do it for you.
This product should be installed near the rear view-mirror, at the centre of
windshield, if possible, for optimal viewing.
Do not touch the lens with your fingers. Finger grease may be left on the lens and
will result in unclear videos or snapshots. Clean the lens on a regular basis.
Do not attempt to disassemble or alter any part of the device that is not described in
this guide.
›
›
›
Caution
›Due to local laws and vehicles safety considerations, do not operate the dash cam
while driving.
Set up time and date accurately before you use this device.
This product gets warm when in use, this is normal.
Do not place the device near a heat source or directly expose it to flame or heat.
Never place the device in vicinity of equipments generating strong electromagnetic
fields. Exposure to strong magnetic fields may cause malfunctions or data
corruption and loss.
The system is used only for non-commercial use, within the maximum limits
permitted by applicable law. Our company does not accept any responsibility for
any data loss during the operation.
Improper use or operation of the product may result in damage of the product or its
accessories and void the warranty.
Before you start using the system, it is assumed that you agree to the above
statement.
›
›
›
›
›
›
›
This ProofCam Dash Cam is warranted to be free from defects in materials or
workmanship from one year from the date of purchase. Within this period,
ProofCam will repair or replace any part or parts (not include Micro SD card)
that fail provided such failure is not deemed to be as a result of misues or
damage caused. The warranty does not apply to cosmetic damage not to
consumables such as batteries or storage cards. At our option, we will either
repair or replace any camera that are deemed to be eligible under the terms
of this warranty. Any damage or fault caused by accident, misuse, unauthorised
. .
.
Warranty
repair or interference or similar is not covered under this warranty.
