PRONAR T314 Manual de usuario
INTRODUCTION
Information contained herein is current at date of publication. As a result of improvements,
some numerical values and illustrations contained in this publication may not correspond to the
factual specification of the machine supplied to the user. The manufacturer reserves the right to
introduce design changes in machines produced that facilitate operation and improve the quality
of their work, without making minor amendments to this Operator's Manual.
This Operator's Manual is an integral part of the machine's documentation. Before using the
machine, the user must carefully read this Operator's Manual and observe all
recommendations. This guarantees safe operation and ensures malfunction free work of the
machine. The machine is designed to meet obligatory standards, documents and legal
regulations currently in force.
The manual describes the basic safety rules and operation of Pronar T314, Pronar T315 and
Pronar T316 slurry spreaders.
If the information contained in the Operator's Manual needs clarification then the user should
refer for assistance to the sale point where the machine was purchased or to the Manufacturer.
MANUFACTURER'S ADDRESS:
PRONAR Sp. z o.o.
ul. Mickiewicza 101A
17-210 Narew
CONTACT TELEPHONES
+48 085 681 63 29 +48 085 681 64 29
+48 085 681 63 81 +48 085 681 63 82
SYMBOLS APPEARING IN THIS OPERATOR'S MANUAL
Information, descriptions of danger and precautions and also recommendations and prohibitions
associated with user safety instructions are marked:
and also preceded by the word "DANGER”. Failure to observe the instructions may endanger
the machine operator's or other person's health or life.
Particularly important information and instructions, the observance of which is essential, are
distinguished in the text by the sign:
and also preceded by the word "ATTENTION". Failure to observe the instructions may lead to
damage to the machine as a result of improper operation, adjustment or use.
In order to focus the user's attention on the need to perform maintenance, the relevant section
of the Operator's Manual is marked with the pictogram:
Additional tips and advice for machine operation are marked:
and also preceded by the word „TIP”.
DIRECTIONS USED IN THIS OPERATOR'S MANUAL
Left side – side to the left hand of the operator facing in the direction of machine's forward
travel.
Right side – side to the right hand of the operator facing in the direction of machine's forward
travel.
REQUIRED SERVICE ACTIONS
Service actions described in the manual are marked: ¨
Result of service/adjustment actions or comments concerning the performance of actions are
marked: Ö
TABLE OF CONTENTS
1BASIC INFORMATION 1.1
1.1 IDENTIFICATION 1.2
1.1.1 IDENTIFICATION OF SLURRY TANKER 1.2
1.1.2 AXLE IDENTIFICATION 1.3
1.1.3 LIST OF SERIAL NUMBERS 1.4
1.2 PROPER USE 1.5
1.3 EQUIPMENT 1.7
1.4 TERMS & CONDITIONS OF WARRANTY 1.8
1.5 TRANSPORT 1.9
1.5.1 TRANSPORT ON VEHICLE 1.9
1.5.2 INDEPENDENT TRANSPORT BY THE USER 1.12
1.6 ENVIRONMENTAL HAZARDS 1.12
1.7 WITHDRAWAL FROM USE 1.13
2SAFETY ADVICE 2.1
2.1 SAFETY INFORMATION 2.2
2.1.1 BASIC SAFETY RULES 2.2
2.1.2 HITCHING AND UNHITCHING FROM TRACTOR 2.3
2.1.3 HYDRAULIC AND PNEUMATIC SYSTEM 2.4
2.1.4 LOADING AND UNLOADING 2.4
2.1.5 CLEANING, MAINTENANCE AND ADJUSTMENT 2.5
2.1.6 SAFE DRIVING 2.7
2.1.7 TYRES 2.10
2.1.8 OPERATING PTO SHAFT. 2.10
2.1.9 DESCRIPTION OF MINIMAL RISK 2.12
2.2 INFORMATION AND WARNING DECALS 2.13
3DESIGN AND OPERATION 3.1
3.1 TECHNICAL SPECIFICATION 3.2
3.2 DESIGN OF THE SLURRY TANKER 3.3
3.2.1 CHASSIS 3.3
3.2.2 TANK WITH EQUIPMENT 3.4
3.2.3 MAIN BRAKE 3.6
3.2.4 PARKING BRAKE 3.8
3.2.5 LIGHTING SYSTEM 3.9
4CORRECT USE 4.1
4.1 PREPARING SLURRY TANKER FOR WORK 4.2
4.1.1 PRELIMINARY INFORMATION 4.2
4.1.2 HAND-OVER AND INSPECTION OF THE MACHINE AFTER
DELIVERY 4.2
4.1.3 PREPARING THE SLURRY TANKER FOR THE FIRST USE,
TEST RUN OF THE SLURRY TANKER 4.3
4.1.4 PREPARING THE SLURRY TANKER FOR NORMAL USE 4.5
4.2 HITCHING AND UNHITCHING THE SLURRY TANKER 4.6
4.3 FILLING THE TANK 4.9
4.4 UNLOADING 4.12
4.5 TRANSPORTING THE MACHINE 4.13
4.6 PROPER USE AND MAINTENANCE OF TYRES 4.15
5MAINTENANCE 5.1
5.1 PRELIMINARY INFORMATION 5.2
5.2 SERVICING WHEEL AXLE 5.2
5.2.1 PRELIMINARY INFORMATION 5.2
5.2.2 CHECK WHEEL AXLE BEARINGS FOR LOOSENESS 5.3
5.2.3 ADJUSTMENT OF PLAY OF WHEEL AXLE BEARINGS 5.5
5.2.4 MOUNTING AND DISMOUNTING WHEEL, INSPECTION OF
WHEEL NUT TIGHTENING. 5.7
5.2.5 CHECK AIR PRESSURE, EVALUATE TECHNICAL CONDITION
OF WHEELS AND TYRES 5.9
5.2.6 MECHANICAL BRAKES ADJUSTMENT 5.10
5.2.7 CHANGE OF PARKING BRAKE CABLE AND ADJUSTMENT OF
CABLE TENSION. 5.12
5.3 PNEUMATIC SYSTEM MAINTENANCE 5.14
5.3.1 PRELIMINARY INFORMATION 5.14
5.3.2 INSPECTING AND CHECKING AIR TIGHTNESS OF
PNEUMATIC SYSTEM. 5.15
5.3.3 VISUAL ASSESSMENT OF SYSTEM 5.16
5.4 CLEANING THE AIR FILTERS 5.16
5.4.1 DRAINING WATER FROM AIR TANK 5.18
5.4.2 CLEANING DRAIN VALVE 5.19
5.4.3 CLEANING AND MAINTAINING PNEUMATIC LINE
CONNECTIONS AND PNEUMATIC SOCKETS 5.20
5.5 HYDRAULIC SYSTEM OPERATION 5.20
5.5.1 PRELIMINARY INFORMATION 5.20
5.5.2 CHECKING HYDRAULIC SYSTEM TIGHTNESS 5.21
5.5.3 CHECKING TECHNICAL CONDITION OF HYDRAULIC
CONNECTIONS AND SOCKETS. 5.21
5.5.4 CHANGING HYDRAULIC CONDUITS 5.22
5.6 LUBRICATING THE SLURRY TANKER 5.22
5.6.1 CONSUMABLES 5.25
5.7 CLEANING THE SLURRY TANKER 5.27
5.8 STORAGE 5.28
5.9 TIGHTENING TORQUE FOR NUT AND BOLT
CONNECTIONS 5.29
5.10 PREPARATION PROCEDURE BEFORE ENTERING THE
TANK 5.30
5.11 CLEANING THE TANK INTERIOR 5.32
5.12 CHECKING THE SLURRY TANKER'S TECHNICAL
CONDITION 5.33
5.13 TROUBLESHOOTING 5.35
5.13.1 TROUBLESHOOTING 5.35
ANNEX A
ANNEX B - CLEAN WATER ACCESSORIES
SECTION
1
BASIC INFORMATION
Pronar T314, Pronar T315, Pronar T316 SECTION 1
1.2
1.1 IDENTIFICATION
1.1.1 IDENTIFICATION OF SLURRY TANKER
FIG. 1.1 Location of the data plate and vehicle identification number (VIN)
(1) data plate, (2) example of vehicle identification number (VIN)
Slurry tankers are marked with the data plate (1) and vehicle identification number (VIN) (2).
The serial number and data plate are located on the right side of the frame on the main
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Esparcidor de PRONAR
Manuales populares de Esparcidor de otras marcas
Fisher
Fisher POLY-CASTER 78601 Manual de usuario
TurfEx
TurfEx RS7200 Manual del propietario
Ferris
Ferris Pathfinder Series Manual de usuario
Fayat Group
Fayat Group DYNAPAC S100 Guía de solución de problemas
Art's-Way Manufacturing
Art's-Way Manufacturing X700 Manual de instalación y operación
EASTMAN
EASTMAN CR 500 Manual de usuario
