Promeba PS-250 Manual de usuario
USER GUIDE
CHAIR PS-250 // POWER TRACK PA-260 //
LOCKING SYSTEM PA-270
Review 01/17
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
3
01 INTRODUCTION
01.1 Use of the manual 05
01.2 Technical sheet 06
02 INSTALLATION
02.1 Transport and unpacking 10
02.2 Anchor points 11
02.3 Electric connection 12
02.4 Start up of the track 13
03 OPERATION
03.1 General elements of chair PS-250 14
03.2 Elements of the chair manual system PS-250 15
03.3 Folding and unfolding the chair PS-250 16
03.4 Engaging and disengaging operation of track system 17
03.5 General elements of track PA-260 18
03.6 Elements of the track manual system PA-260 19
03.7 Operation of up and down stairs of the track system 20
03.8 Control Panel 21
03.9 Adjust the track to the stairs 22
03.10 Problem solving 23
03.11 General elements of locking system PA-270 24
03.12 Elements of the locking manual system PA-270 25
04 ASSEMBLAGE AND DISASSEMBLE
04.1 Exploded view of general chair set PS-250 26
04.2 General chair bill of materials PS-250 27
04.3 Exploded view of chair backrest set PS-250 28
04.4 Chair backrest set bill of materials PS-250 29
04.5 Exploded view of front legs chair set PS-250 30
04.6 Front legs chair set bill of materials PS-250 31
04.7 Exploded view of seat frame chair set PS-250 32
04.8 Seat frame chair set bill of materials PS-250 33
04.9 Exploded view of extensible left handle chair set PS-250 34
04.10 Left handle chair set bill of materials PS-250 35
04.11 Exploded view of extensible right handle chair set PS-250 36
04.12 Extensible right handle chair set bill of materials PS-250 37
04.13 Exploded view of general track set PA-260 38
04.14 General track set bill of materials PA-260 41
04.15 Exploded view of control panel track set PA-260 42
04.16 Control panel track set bill of materials PA-260 43
04.17 Exploded view of loading head track set PA-260 44
04.18 Load head track set bill of materials PA-260 45
04.19 Exploded view of support general set PA-270 44
04.20 Support general set bill of materials PA-270 45
04.21 Exploded view of loading head support set PA-270 44
04.22 Loading head support set bill of materials PA-270 45
04.23 Exploded view of top locking system set PA-270 44
04.24 Top locking system set bill of materials PA-270 45
INDEX
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
4
05 ELECTRIC DIAGRAM
05.1 Printed circuit board 53
05.2 Electrical wiring diagram 55
06 GENERAL MAINTENANCE 56
07 LEGAL NOTICES 57
08 PRODUCT WARRANTY 58
INDEX
PS-250 MODEL
EMERGENCY CHAIR
PA-260 MODEL
POWER TRACK
PA-270 MODEL
SUPPORT WITH CHARIGING STATION
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
5
01.1 Use of the manual
The manual content includes instructions for use and
maintenance of the product, as well as how to solve mi-
nor breakdowns that may arise.
It is recommended before operating the product, this
manual should be carefully read to avoid deterioration
due to misuse.
Do not lose this document, it must be accessible to any
query that could arise by the health personnel.
Remember, a good use and maintenance are necessary
for the proper functioning of the product.
Each product has an identication sticker with the se-
rial number and model. Keep these numbers so you
can tell the distributor if necessary.
01 INTRODUCTION
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
6
01.2 Technical sheet
MEASURES AND CHARACTERISTICS // PS-250 EMERGENCY CHAIR
LENGTH 715 mm WHEELS 4 (2 WITH BRAKES)
WIDTH 550 mm ARMRESTS 2 (FOLDING)
HIGH 1025 mm REAR HANDLES 2 (BLOCKABLE)
FOLDED HIGHT 220 mm FRONT HANDLES 2 (5 POSITIONS)
WEIGHT 13 Kg SEAT HIGH 515 mm
MAX. LOAD 180 Kg SEAT MEASURES 430x460 mm
PERSONNEL REQUIRED 2 BACKREST MEASURES 440x440 mm
01 INTRODUCTION
515
170
220
395
360
715
430
217
1025
440
550
440
180
360
320
230
102º
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
7
MEASURES AND CHARACTERISTICS // PA-260 ELECTRIC TRACK
LENGTH 250 mm ELECTRICAL POWER SUPPLY 12 V. CC. / 24V AC.
WIDTH 350 mm CONSUMED POTENCE 30A
HIGH MIN/MAX 1080-1520 mm PERSONNEL REQUIRED 2
WEIGHT 17 Kg LONG BELTS 820 mm
MAX. LOAD 160 Kg LOADING TIME 60 min
TEMP. MIN/MAX -20º/+40º TRANSPORT WHEELS 2x Ø50 mm
MAX. AUTONOMY 140min/130Kg LED LIGHTS 2x LENGTH 25CM
01 INTRODUCTION
200
1520
425
350
170
250
14-25-33º
400600
1090
820
01 INTRODUCCIÓN
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
9
MEASURES AND CHARACTERISTICS // PA-270 SUPPORT WITH LOAD SYSTEM
LENGTH 310 mm ELECTRICAL POWER SUPPLY 12 V. CC.
WIDTH 535 mm CONSUMED POTENCE 30A
HIGH 1175 mm WORKING TEMPERATURE -20º/+40º
WEIGHT 17 Kg PERSONNEL REQUIRED 1
300
310
220 355
535
1175
535
310
325
01 INTRODUCTION
USER GUIDE //
CHAIR PS-250 + POWER TRACK PA-260 + LOCKING SYSTEM PA-270
Review 01/17
10
02 INSTALLATION
02.1 Transport and unpacking
First remove the packaging carefully so as not to dama-
ge the outside of the stretcher.
1. Transport
· Always x the load, if it is necessary stack. you should
follow the diagram shown.
· Transport the level load and following all the precepts
and regulations regarding the transport of loads.
2. Unpacking
· Put the box on a at and stable surface, open the seal
carefully not to damage inside.
· Remove the product from the inside of the case as
shown in the chart below.
Each product has been thoroughly inspected when
leaving the factory.To ensure that the transport has not
deteriorated it, please inspect the exterior and interior
carefully, and in the event of any damage, contact the
installer immediately.
PACKING UNIT
RESPECT THE PACKAGING TRANSPORT POSITION
UNPACKING THE PRODUCT
ALWAYS USE FLAT SURFACE
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Silla de ruedas de Promeba
