Promate SolarWay-2 Manual de usuario
User Guide
English
Introduction
A superior quality solar wall light that offers a contemporary design and reliable performance. This
light has a minimal feel and is perfect for use all year. With an IP65 rating, it has superior water
resistance. It will charge during the day and automatically activate at night when it detects motion.
Packaging Contents
• SolarWay-2
• User Guide
Specifications
• Battery Capacity: 2000mAH
• Battery Type: 18650 Li-ion
• Solar Panel Input: 5V/175mA
• LED Brightness: 160lm
• Motion Sensor Range: 3-5m
• Charging Time: 11-12 Hours
• Usage Time: 10 hours
English
2
Features
• Motion Sensor: The sensitive motion sensor detects motion from up to 16 feet
away. Even your little pets, like dogs, cats can activate the solar light sensor.
• Super Bright: 12 LED Design offers super bright lighting for a wide area and strong
illumination.
• Light Sensor: Turns on SolarWay-2 automatically at night and turns it off at dawn.
• Long-Lasting & Energy-Saving: SolarWay-2 takes 11-12 hours to charge and the light
lasts all night on a full charge.
• Easy to Install: Super easy to setup and install, add the needed light source for your
house without the added expense and trouble of installing electrical wire. You can
install it in any place that has direct sunshine.
• Water-Resistant: This LED light is water resistant and durable with hard plastic
which can withstand years of usage.
Precautions
Please read all safety instructions and warnings thoroughly before using this product.
Improper use of this product may result in damage to this or attached products.
1. Do not disassemble the product or attempt to fix it.
2. Do not attempt to replace any part of this product or battery inside.
3. Do not crush, puncture, dispose of in fire, short the contacts or expose the product
to water or other liquids.
4. Do not store or use the product in a high-temperature environment, including
intense sunlight or heat.
5. Avoid drops, bumps, abrasions and impacts.
6. If there is any reason to believe that there is damage to the product, discontinue
use immediately.
7. If you find that the product is too hot, is emitting an odour, or is deformed,
punctured or exhibits any suspicious or abnormal behaviour, discontinue use
immediately and contact our customer service.
English
3
Appearance & Interface Description
1. Solar Panel
2. Work Mode Button (Auto/On)
3. Motion Sensor(s)
4. LED Lights
5. Mounting Screw Hole(s)
6. Main Power Button (On/Off)
SolarWay-2
SolarWay-2
BatteryCapacity: 2000mAH
BatteryType: 18650Li-ion
SolarPanel Input: 5V/130mA
LEDBrightness: 160lumens
S/N:
Madein China
www.promate.net
180196
1
2
3
4
5
6
English
4
Operation Instructions
1. Installation
Install the SolarWay-2 in an open area where the sun can shine on it in order to
maximize the use of its built-in rechargeable battery. Find an appropriate
mounting location that is free from cold or hot winds, lightning, and extremely
high temperatures. Use screws that are fixed on the wall for mounting.
2. Operation
Locate the Main Power Button located at the rear of the SolarWay-2. Keep it
turned OFF during transportation or whenever the SolarWay-2 is not in use.
Once you’re ready to start using it, turn the switch to ON.
Use the Work Mode Button to choose between two usage options: AUTO or ON.
The amount of time that the SolarWay-2 stays on will depend on how much
charge it carries. If set to AUTO, it can last all night if it is charged properly for
11-12 hours. If set to ON, it will run down the battery and may last anywhere
from a few minutes to a few hours depending on how much charge is available.
User discretion is advised.
English
5
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end of-life should be
disposed of separately from your household waste.
Please dispose of this equipment at your local community waste
collection/recycling center.
This product complies with European safety and electrical interference directives
This product does not contain environmentally hazardous materials (lead, mercury,
cadmium, hexavalent chromium and brominated flammable agents: PBB and PBDE).
Spanish
6
Presentación y Descripción de la Interfaz
1. Panel solar
2. Botón de modo de trabajo (Auto/On)
3. Sensor(es) de Movimiento
4. Luces LED
5. Orificio(s) de tornillo(s) de montaje
6. Botón de encendido principal (On/Off)
SolarWay-2
SolarWay-2
BatteryCapacity: 2000mAH
BatteryType: 18650Li-ion
SolarPanel Input: 5V/130mA
LEDBrightness: 160lumens
S/N:
Madein China
www.promate.net
180196
1
2
3
4
5
6
Spanish
7
Instrucciones de uso
1. Instación
Instale el SolarWay-2 en un área abierta donde el sol pueda iluminarlo para
maximizar el uso de su batería recargable incorporada. Encuentre un lugar de
montaje apropiado que esté libre de vientos fríos o calientes, rayos o
temperaturas extremadamente altas. Para el montaje, utilizar tornillos de fijación
a la pared.
2. Funcionamiento
Localice el botón principal de encendido situado en la parte posterior del
SolarWay-2. Manténgalo apagado durante el transporte o cuando el SolarWay-2
no esté en uso. Una vez que esté listo para comenzar a usarlo, ponga el
interruptor en ON.
Utilice el botón de modo de trabajo para elegir entre dos opciones de uso: AUTO
u ON. El tiempo que el SolarWay-2 permanezca encendido dependerá de la
cantidad de carga que lleve. Si se ajusta a AUTO, puede durar toda la noche si se
carga correctamente durante 11-12 horas. Si se establece en ON, se descargará la
batería y puede durar desde unos pocos minutos hasta unas pocas horas,
dependiendo de la cantidad de carga disponible. Se aconseja la discreción del
usuario.
French
8
Appearance & Interface Description
1. Panneau Solaire
2. Bouton Mode de Travail (Auto/On)
3. Détecteur(s) de Mouvement
4. Lumières LED
5. Trou (s) de vis de montage
6. Bouton d’Alimentation Principal (On/Off)
SolarWay-2
SolarWay-2
BatteryCapacity: 2000mAH
BatteryType: 18650Li-ion
SolarPanel Input: 5V/130mA
LEDBrightness: 160lumens
S/N:
Madein China
www.promate.net
180196
1
2
3
4
5
6
French
9
Mode d’Emploi
1.Installation
Installez le SolarWay-2 dans un espace ouvert exposé au soleil afin de
maximiser l’utilisation de sa batterie rechargeable. Trouvez un emplacement
de fixation approprié où il n’y ait ni courants d’air froid ou chaud, ni risque de
foudre ni températures extrêmement élevées. Utilisez les vis qui sont fixées
sur le mur pour le montage.
2.Fonctionnement
Localisez le Bouton d’Alimentation Principal situé à l’arrière du SolarWay-2.
Gardez-le éteint pendant le transport ou lorsque le Solar Way-2 n’est pas
utilisé. Lorsque vous souhaiterez l’utiliser, placez l’interrupteur sur ON.
Utilisez le Bouton de Mode de Travail pour choisir entre deux options
d’utilisation : AUTO ou ON. L’autonomie d’utilisation du SolarWay-1 dépend de
la charge qu’il contient. S’il est sur le mode AUTO, il peut durer toute la nuit si
l’appareil a été chargé correctement pendant 11 à 12 heures. S’il est sur le
mode ON, la batterie s’épuisera et durera entre quelques minutes et quelques
heures, en fonction de la charge disponible. À la discrétion de l’utilisateur.
Tabla de contenidos
Otros manuales de Luz exterior de Promate
Manuales populares de Luz exterior de otras marcas
Lindby
Lindby 9949029 Manual de usuario
HEPER
HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento
HEPER
HEPER LW8034.003-US Instrucciones de instalación y funcionamiento
Maretti
Maretti VIBE S 14.6080.04.A Manual de usuario
BEGA
BEGA 84 253 Manual
HEPER
HEPER MINIMO Instrucciones de instalación y funcionamiento
LIGMAN
LIGMAN BAMBOO 3 Manual de usuario
Maretti
Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB Manual de usuario
urban ambiance
urban ambiance UQL1273 Manual de usuario
TotalPond
TotalPond 52238 Manual de usuario
Donner & Blitzen
Donner & Blitzen 0-02661479-2 Manual de usuario