PROLYNX PL-1000WP Manual de usuario

PL-1000WP

Mobile Radio

YEAR

NOTE: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part 15

of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

To Customers

Thank you very much for using two way radios.

This product has a newly developed function menu

and humanism operation design, making it easy to

use. It will meet your requirement by the compact size

and reasonable price.

Thank you for choosing PROLYNX PL-1000WP mobile transceiver, PROLYNX

always provides high quality products, and this transceiver is no exception. As you

learn how to use this transceiver, you will find that PROLYNX is pursuing “user

friendliness”. For example, each time you change the menu No. in Menu mode,

you will see a text message on the display lets you know what you are configuring.

Though friendly design for user, this transceiver is technically complicated and

some features may be new to you. Consider this manual to be a personal tutorial

from the designers, allow the manual to guide you through the learning process

now, then act as a reference in the coming years.

Please contact the local authorized dealer if you have any questions. We are

not responsible for any typographical errors that may by in this manual. Standard

accessories may change without notice, getting your understanding for any

inconveniences.

When programming the transceiver, read the factory initial data firstly, and then

rewrite the frequency and signaling etc. otherwise errors may occur because of

different frequency band etc.

1313

Adjusting the Volume ………………………………………………………………

Switch between VFO and Channel Mode ………………………………………

Adjusting Frequency/Channel through Selector Knob ………………………

Receiving ……………………………………………………………………………

Transmitting …………………………………………………………………………

Transmitting Tone-Pulse ……………………………………………………………

Transmitting Optional Signaling ……………………………………………………

Channel Edit ………………………………………………………………………

Channel Delete ……………………………………………………………………

Shortcut Operations …………………………………………………………………

Frequency Scan ……………………………………………………………………

Offset Direction and Offset Frequency Set up ……………………………………

Operation of the composite key ……………………………………………………

Beep (FUN+0) ………………………………………………………………………

Channel Scan (FUN+1) ……………………………………………………………

Frequency Channel Step Setup (Fun+2) …………………………………………

CTCSS/DCS Frequency Setting (FUN 3/Tone) …………………………………

TOT (FUN+4) ………………………………………………………………………

Keypad Lockout (FUN+5) ……………………………………………………………

Squelch Level Setting (FUN+6/A/B) ………………………………………………

Contents

Users Safety Information ……………………………………………………………

Package Includes ………………………………………………………………………

Main Features …………………………………………………………………………

Initial Installation ………………………………………………………………………

Mobile Installation …………………………………………………………………

DC Power Cable Connection ……………………………………………………

Fixed Station Operation ……………………………………………………………

Replacing Fuses ……………………………………………………………………

Antenna Connection ………………………………………………………………

Accessories Connections ……………………………………………………………

External Speaker ……………………………………………………………………

Microphone: …………………………………………………………………………

Getting Acquainted ……………………………………………………………………

Front Panel Operation ……………………………………………………………

Display ………………………………………………………………………………

Microphone …………………………………………………………………………

Basic Operation ………………………………………………………………………

Switching the Power On/Off ………………………………………………………

LCD Backlight Display Time Setting (FUN+7) ……………………………………

High/Mid/Low Power Selection (FUN+8) …………………………………………

DTMF Current Channel Edit (FUN+9/Scan) ………………………………………

Channel Deleted Quickly (FUN+VFO) ……………………………………………

Channel Copied Quickly (FUN+Call) ………………………………………………

Talk Around (FUN+*) ………………………………………………………………

Reverse Frequency (FUN+#) ……………………………………………………

Menu ……………………………………………………………………………………

1. Signaling …………………………………………………………………………

2. Scan ………………………………………………………………………………

3. Contacts (Gps Optional) ………………………………………………………

4. Setting ……………………………………………………………………………

Menu Operation ……………………………………………………………………

Key Setting ……………………………………………………………………………

DTMF operation ………………………………………………………………………

DTMF decoding ……………………………………………………………………

DTMF setting ………………………………………………………………………

DTMF operating: ……………………………………………………………………

2 Tone Operation ………………………………………………………………………

2 Tone encode ………………………………………………………………………

2 Tone decode ………………………………………………………………………

5 Tone Operation ………………………………………………………………………

5 Tone encode ………………………………………………………………………

Simple Trouble Shooting ……………………………………………………………

Specifications …………………………………………………………………………

General ………………………………………………………………………………

Receiver ………………………………………………………………………………

Transmitter …………………………………………………………………………

Users Safety Information

● Do not attempt to configure your transceiver while driving.

● This transceiver is designed for a 13.8V DC power supply. Do not use a 24V battery to

power on the transceiver.

● Please keep it away from interferential devices (Such as TV s, generators, etc.)

● Do not expose the transceiver to long periods of direct sunlight or place it close to

heating appliances.

● If an abnormal odour or smoke is detected coming from the transceiver, turn off the

power immediately and contact your dealer.

● Do not transmit with high power for extended periods or the transceiver may overheat.

Package Includes

● Radio unit x 1

● Keypad DTMF microphone x 1

● Mobile mounting bracket x 1

● DC power cable with fuse holder x 1

● Screw packs x 1

● Protection fuses x 1

● User manual x 1

Main Features

PL-1000WP mobile radio has nice housing, stoutness & stability, advanced and reliable

functions, perfect & valuable. This amateur mobile radio especially designs for drivers and

it pursues company philosophy of innovation and practicality. More functions as follows:

■ Distribute buttons reasonably, convenient for operation. Adopt superior quality material,

better technology and high quality radiator to ensure stable and durable operation.

■ IP 67 waterproof (Optional)

■ GPS (Optional)

■ 1750/2100/1000/1450 Tone

■ Automatic power-off

■ 200 programmable memorized channels, identified by editing name.

■ Programming different CTCSS, DCS, 2Tone, 5Tone in per channel, rejecting extra

calling from other radios.

■ Different bandwidth per channel, 25K for wide band, 20K for middle band, or 12.5K for

narrow band.

■ Five programmable multi-functional keys, can set various shortcut operation according

to different requirement.

0201

Determine the appropriate angle of the transceiver, using the 3 screw hole positions

on the side of the mounting bracket.

DC Power Cable Connection

Note: Locate the power input connector as close to the transceiver as possible.

The vehicle battery must have a nominal rating of 12V. Never connect the transceiver to

a 24V battery. Be sure to use a 12V vehicle battery that has sufficient current capacity. If

the current to the transceiver is insufficient the display may darken during transmission or

transmitting output power may drop excessively.

1. Route the DC power cable supplied with the transceiver directly to the vehicle’s battery

terminals using the shortest path from the transceiver. We suggest you do not use the

cigarette lighter socket as some cigarette lighter sockets introduce an unacceptable

voltage drop. The entire length of the cable must be dressed so it is isolated from heat,

moisture and the engine secondary (high voltage) ignition system/cables.

2. After installing the cable, in order to avoid the risk of damp, please use heat-resistant

tape to tie together with the fuse box. Do not forget to reinforce the whole cable.

3. Confirm the correct polarity of the connections, then attach the power cable to the

battery terminals: Red connects to the positive (+) terminal and black connects to the

Initial Installation

Mobile Installation

To install the transceiver select a safe and convenient location inside your vehicle that

minimizes danger to your passengers and yourself while the vehicle is in motion. Consider

installing the unit at an appropriate position so that knees or legs will not strike it during

sudden braking of your vehicle. Try to pick a well ventilated location that is shielded from

direct sunlight.

1. Install the mounting bracket in the vehicle using the supplied self-tapping screws and flat

washers.

2. Position the transceiver, the insert and tighten the supplied hexagon SEMS screws.

Double check that all screws are tightened to prevent vehicle vibration from loosening

the bracket or transceiver.

0403

Use the supplied DC power cable to connect the transceiver to a regulated power supply.

Do not substitute a cable with smaller gauge wires.

2. Connect the transceiver's DC power connector to the connector on the DC power cable.

3. Press the connectors firmly together until the locking tab clicks.

Note: Before connecting the DC power to the transceiver be sure to switch the transceiver

and the DC power supply OFF.

Do not plug the DC power supply into an AC outlet until you make all connections.

Regulated power supply

DC power cable with fuse holder

Regulated

power supply

Red

Black

0605

negative (-) terminal.

4. Reconnect any writing removed from the negative terminal.

5. Connect the DC power cable to the transceiver’s power supply connector. Press the

connectors firmly together until the locking tab clicks.

Ext. Power jack DC power cable

Fixed Station Operation

In order to use this transceiver for fixed station operation you will need a separate 13.8V

DC power supply (not included).

Please contact your local dealer about it.

The recommended current capacity of your power supply is 12A.

1. Connect the DC power cable to the regulated DC power supply and ensure that the

polarities are correct. (Red: positive; Black: Negative).

Do not directly the transceiver to an AC outlet.

Replacing Fuses

If the fuse blows, determine the cause then correct the problem. After the problem is

resolved replace the fuse. If newly installed fuses continue to blow, disconnect the power

cable and contact your local dealer for assistance.

Only use fuses of the specified type and rating otherwise the transceiver could be damaged.

Note: If you use the transceiver for a long period when the vehicle battery is not fully

charged or when the engine is OFF, the battery may become discharged and will not have

sufficient reserves to start the vehicle. Avoid using the transceiver in these conditions.

Antenna Connection

Before operating install an efficient well-tuned antenna. The success of your installation

will depend largely on the type of antenna and its correct installation. The transceiver can

give excellent results if the antenna system and its installation are given careful attention.

Use a 50Ω impedance antenna and low-loss coaxial feed-line that has a characteristic

impedance of 50Ω, to match the transceiver input impedance. Coupling the antenna to

antenna to the transceiver via feed-lines having a impedance other than 50Ω reduces the

efficiency of the antenna system and can cause interference to nearby broadcast TV

receivers, radio receivers and other electronic equipment.

Note: Transmitting without first connecting an antenna or other matched load may damage

the transceiver. Always connect the antenna to the transceiver before transmitting.

All fixed stations should be equipped with a lightning arrester to reduce the risk of

fire, electric shock and transceiver damage.

0807

Accessories Connections

External Speaker

If you plan to use an external speaker, choose a speaker with an impedance of 8Ω. The

external speaker jack accepts a 3.5mm mono (2-conductor) plug.

Note: External speaker output adopts double port BTL. Please be aware that the speaker

can’t connect to the ground otherwise the speaker will fault. The wrong connection

way is as below:

Ground

Error

Microphone:

For voice communications, connect a microphone equipped insert into the modular socket

on the side of the main unit and tighten the screw. Attach the supplied microphone hanger

in an appropriate location using the screws includes included in the screw set.

MIC

SCN

TOT

LAM 8

POW

BEP

MUTE

VOL

DTaM

LOCK

SQL

CALL

FUN

STP 3

C/T

VFO

Antenna

Microphone connector External speaker

1009

Tabla de contenidos

Manuales populares de Radio de otras marcas

EisSound

EisSound KBSound iSelect Manual de usuario

Midland

Midland 1001LWX Manual de usuario

Konig

Konig HAV-SR41 Manual de usuario

Roberts

Roberts exprssion Manual de usuario

VDigi

VDigi DD3.0 Manual de usuario

Radio Shack

Radio Shack 21-1863 Manual de usuario

Roberts

Roberts Stream 207 Manual de usuario

Sony

Sony Walkman SRF-M97 Manual de usuario

Stanley

Stanley FatMax FMC770 Manual de usuario

auna

auna DAB-Radio 10026947 Manual de usuario

SOUNDMASTER

SOUNDMASTER UR190 Manual de usuario

HYT

HYT TC-320 Manual de usuario

auna multimedia

auna multimedia Yellowstone 10026851 Manual de usuario

B-Tech

B-Tech GMRS-V2 Manual de usuario

Weierwei

Weierwei VEV-V8 Manual de usuario

SOUNDMASTER

SOUNDMASTER DAB750 Manual de usuario

Telefunken

Telefunken TF-1505 Manual de usuario

Makita

Makita LXRM03 Manual de usuario