Project Source 05535029 Manual de usuario
ITEM #05535029
MODEL #05535029
11’x16’ Car Shelter
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 866-389-8827. 8 a.m. - 8 p.m., EST, Monday - Sunday. You could
Serial Number Purchase Date
AS22149
ATTACH YOUR RECEIPT HERE
Page 1
TM
PROJECT SOURCE and logo design are
trademarks or registered trademarks of
LF, LLC. All rights reserved.
TM
PRODUCT SPECIFICATIONS
TABLE OF CONTENTS
SPECIFICATIONS
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................4
Safety Information. .........................................................................................................................5
Preparation ....................................................................................................................................5
6.............................................................................................snoitcurtsnInoitallatsnIroylbmessA
Care and Maintenance .................................................................................................................10
Warranty ......................................................................................................................................10
Replacement Parts List ..................................................................................................... 10...........
Page 2
Extended space for storage
Doors at both ends, easily slide open
Clear see-through arched windows
High density polyethylene tarp
Durable galvanized steel frame
Page 3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Cross Bar A 15
B Cross Bar B 5
C Leg Tube 4
D Leg Tube 6
E Support Tube 4
F Rafter Brace Tube 5
G Peak Rafter 5
H Connecting Bar 4
H-1 Connecting Bar 6
I Door Tube A 2
J Door Tube B 2
K
Roof Panel
1
L
Front/Back Panel
2
M M6 x 45 Bolt 18
N M6 x 65 Bolt 25
O M6 Wing Nut 43
P
Large Bungee Cord
12
Q
S Hook
12
R
Floor Bracket
4
S
Nail
8
T
Washer
15
U
Plug
10
V
Plug
10
W
Large Door Rail Hook
8
PART DESCRIPTION QUANTITY
Page 4
HARDWARE CONTENTS (shown actual size)
Qty. 18 Qty. 43
S
M6 x 45 Bolt M6 x 65 Bolt
M
M6 Wing Nut
Qty. 15
Q
Washer
Qty. 25
R
O
Qty. 12
T
S Hooks
Qty. 4
Floor Bracket
Qty. 8
N
Nail
Qty. 8
Large door rail hook
W
Page 5
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
This winter car shelter is designed specifically to provide vehicle shelter from the elements during
winter months. This unit must be assembled in accordance with the assembly instructions provided.
During severe winter conditions, an excessive accumulation of snow or ice on the canopy roof may
pose a safety concern. Under such conditions, accumulations of snow or ice must be removed from
the exterior of the shelter as there may be a weight overload on the canopy which could affect the
units structural integrity. This winter shelter must be properly secured to avoid movement and/or
subsequent damage. There are numerous methods available to owners. Please obtain advice at
your point of purchase on which method of anchoring is most suitable for your location.
Keep all heat sources and flame away from this shelter. This shelter is meant for vehicle storage
only and should not be used as a shelter for personal and/or public gatherings. Never allow snow or
ice build up on the roof. Remove ice and snow with a broom or non-sharp snow removal tool,
always from the outside of the structure.
Do not walk on the top of the car shelter and be sure to clean the top of the car shelter after each
snowfall.
CAUTION
Please retain a copy of your point of purchase receipt. It will be required as reference when making
any warranty claim. Please check the municipal by-law prior to setting up the product.
WARNING
IMPORTANT: VENDOR REPRESENTS, WARRANTS AND AGREES THAT LABELING,
DESIGN, PACKAGING, SPECIFICATIONS SHALL COMPLY IN ALL RESPECTS WITH ALL
APPLICABLE LAWS AND STANDARDS.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 90 minutes
Tools Required for Assembly (not included): N/A
PREPARATION
ASSEMBLY INSTRUCTIONS
1. Assemble the first arch and set the first arch using two
“C” Legs tubes in a way that will allow the assembly of
the "E” Support tubes. Secure support tube “E" to the
elevated hole in the front leg. Connect the base of the
front leg using crossbar "A” And connect the base of
the second leg using both support tube “E" And cross
bar "A”. Do not tighten these connections at this time.
Repeat on other side. Lift the front arch and completely
tighten support tube "E” To the leg tube. Lift the second
arch and secure it to the front arch by tightening cross
bar "A”. Repeat this process when assembling other
arches (secure the base of the tube of the last arch lifted
to the base of the tube of the next arch).
Hardware Used
Page 6
2. Insert plugs “U” into all open ends of tubes “A”.
Hardware Used
2
Ux 10
Plug
Mx 18
M6 x 45 mm Bolt
Nx 25
M6 x 65 mm Bolt
1
ASSEMBLY INSTRUCTIONS
Hardware Used
3. Put plugs “V” on all tubes “C” and "D”.
4. Prior to putting on the cover, make certain that the
frame is placed exactly where it needs to be located,
adjust the length and width of the base so that the frame
is square.
4
3
Page 7
5. Carefully slide the cover over the frame. Center the
cover on the frame and check that it is centered both in
width and length.
5
Vx 10
Plug
ASSEMBLY INSTRUCTIONS
Page 8
6. Tie all the ties around the pipes. Take the strapsand
pass them underneath the pipes, pull upand tighten
through metal buckle.
6
7. Insert tube t into tube “J” to create a door rod.
7
8. Thread the end of door rod through the doors
suspension rings.
Hardware Used
8
Wx 8
Large Door Rail Hook
Page 9
ASSEMBLY INSTRUCTIONS
9. To keep door shut, thread bungee cords through front
of door grommets and tie elastic ends onto s-hook.
Thread s-hook through corresponding grommet on side
of shelter.
Hardware Used
9
Qx 12
S Hook
CARE AND MAINTENANCE
-Closing the doors at both ends will prevent wind accumulation inside the unit and will avoid
movement concerns and/or undue strain or damage to your canopy and/or its structure.
-Regularly check the unit structure to ensure parts are tight and secure.
-Do not make design or assembly changes to the structure. This may weaken the structure and result
in eventual damage.
-Leave sufficient room around the unit for snow removal.
-Never leave a vehicle with the motor running in the shelter.
-After use. Please ensure all covers are clean and dry before storing. Storing a cover with
accumulated dirt and debris will affect its stability and efficiency when next used.
-Do not store in area with continuous direct sunlight.
-Common sense use and maintenance will ensure your unit will remain in good condition.
-Put blocks on the bottom (on the skirt) to hold the canvas and the structure.
WARRANTY
Thank you for purchasing this product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing faults for a period of 12
months from the date of purchase. This warranty does not affect your statutory rights.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 866-389-8827. 8 a.m. - 8 p.m.,
EST, Monday - Sunday.
Printed in China
Page 10
PART DESCRIPTION QUANTITY
A Cross Bar A 15
B Cross Bar B 5
C Leg Tube 4
D Leg Tube 6
E Support Tube 4
F Rafter Brace Tube 5
G Peak Rafter 5
H Connecting Bar 4
H-1 Connecting Bar 6
I Door Tube A 2
J Door Tube B 2
K
Roof Panel
1
L
Front/Back Panel
2
M M6 x 45 Bolt 18
N M6 x 65 Bolt 25
O M6 Wing Nut 43
P
Large Bungee Cord
12
Q
S Hook
12
R
Floor Bracket
4
S
Nail
8
T
Washer
15
U
Plug
10
V
Plug
10
W
Large Door Rail Hook
8
PART DESCRIPTION QUANTITY
Tabla de contenidos
Idiomas:
Otros manuales de Refugio de Project Source
