Proflex TRX1 Ultra Manual de usuario

TRX1 Elite Electric Treadmill

User Manual

[Revision 1.0 August 2017]

READ THIS MANUAL CAREFULLY BEFORE USE –FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY

DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by

this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.

TRX1 Elite Electric Treadmill

Safety

Basic precautions, including the following important safety instructions, should always be followed when

using this equipment. Read all instructions before use.

To reduce the risk of electric shock, always unplug the equipment from the electrical outlet after use

and before cleaning, assembling, or servicing. Failure to follow these instructions may lead to

personal injury and cause damage to the equipment.

Before beginning any exercise program, consult your physician. This is especially important for people over

35 years of age or who have pre-existing health problems. Read all instructions before using any fitness

equipment. Do not operate this exercise equipment without properly fitted guards, as the moving parts can

present a risk of serious injury if exposed.

•Use this product for its intended use only as described in this user manual. Do not use attachments not

supplied or recommended by the manufacturer.

•Never operate the unit with a damaged cord or plug, or if it is malfunctioning. If it has been dropped,

damaged or exposed to water, have the unit inspected/repaired by an authorized service center.

•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualified persons in order to avoid it being a potential hazard.

•This equipment must be plugged into a nominal 240VAC / 50Hz outlet that is properly grounded.

•Caution –To avoid injury, use caution when stepping on to or off the equipment.

•Maximum weight capacity = 100 kg.

•Do not attempt any maintenance or adjustments other than those described in this user manual. Should

any problems arise, discontinue use and consult an authorized service centre or personnel.

•Any information or data provided by the equipment is a guide only and is not to be used as medical data

or scientific evidence.

•Never operate the equipment with the air openings blocked. Keep the air openings free of lint, hair, and

other obstructions.

•Do not use the unit outdoors.

•Do not pull the equipment by its power cord or use the cord as a handle.

•Keep children and pets away from the equipment while in use.

•Elderly or disabled users should only use the equipment in the presence of an adult who can provide

assistance if required.

•Do not operate where aerosol (spray) products are in use or where adequate oxygen is not available.

•Keep dry –do not operate in wet or moist conditions.

•The motor cover can become hot while the equipment is in use. Do not place the equipment on

flammable surfaces.

•Keep the electrical cord away from hot surfaces.

•Keep the equipment on a solid, level surface with a minimum safety area clearance of two meters

around it. Be sure the area around the equipment remains clear of any obstructions during use.

•This equipment is for domestic household use only.

•One person only should use the equipment at a time.

•Wear comfortable and suitable clothing when using the equipment. Do not use the equipment barefoot or

in socks. Always wear appropriate, enclosed athletic footwear. Never wear loose or baggy clothing as it

can become caught on the equipment and create a hazard.

•Always hold on to the handrails while using the equipment.

•Always ensure the belt platform is securely in place when folding and moving the equipment.

•Do not leave children unsupervised near or on the equipment.

•Children should not be allowed to play or operate the equipment at any time.

•To disconnect, turn all controls to the OFF position, then remove plug from the wall outlet.

TRX1 Elite Electric Treadmill

•This equipment is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the equipment by a person responsible for their safety.

•Remove the safety tether for emergency stop.

•Keep hands clear of all moving parts. Never place hands or feet under the equipment while in use.

•Do not use the equipment on high-pile carpet greater than 1.3 cm in height.

•Before using the equipment, check that the belt is aligned and centred on the running deck and all visible

fasteners on the equipment are sufficiently tightened and secure.

•Never operate this equipment when folded.

•Allow the running belt to fully stop and unplug the power cord from the wall outlet before folding the

equipment.

•Always face towards the console and do not run backwards on the running belt.

TRX1 Elite Electric Treadmill 
E&OE © 2017 Proflex 4 
Table of Contents 
Safety................................................................................................................................................2 
Parts Identification...........................................................................................................................5 
Assembly..........................................................................................................................................6 
Operation..........................................................................................................................................8 
Safety Tether and Emergency Stop.............................................................................................................8 
Program and Manual Modes........................................................................................................................8 
Console and Functions ................................................................................................................................8 
Manual Mode Training ...............................................................................................................................10 
Setting a Pre-Set Session Duration.....................................................................................................10 
Setting a Pre-Set Session Distance ....................................................................................................10 
Setting a Target Calorie Value ............................................................................................................10 
Program Mode Training .............................................................................................................................11 
Care, Maintenance and Troubleshooting ....................................................................................12 
Cleaning.....................................................................................................................................................12 
Storage.......................................................................................................................................................12 
Troubleshooting .........................................................................................................................................12 
Maintenance...............................................................................................................................................13 
Belt Lubrication....................................................................................................................................13 
Belt Alignment and Tension Adjustment .............................................................................................13 
Specifications.................................................................................................................................13 
Warm-Up and Cool-Down Routine ...............................................................................................14 
 

TRX1 Elite Electric Treadmill

Parts Identification

The equipment comes most assembled, with the following parts. Ensure that all parts are included before

assembly.

No.

Qty.

Description

No.

Qty.

Description

1

Treadmill (includes belt platform,

console, motor, handlebar etc)

4

1

Fasteners / Tools:

M8x30 Screw (2)

M8 Washer (2)

M8 Lock Bolt

Spanner / Screwdriver

5mm and 6mm Allen Key

2

1

Safety Tether

3

1

Belt Lubricant

1

2

4

3

4

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX

TRX1 Elite Electric Treadmill

Assembly

1. Take all parts out of the carton and place them on a firm, flat surface. Remove all packing materials.

2. With the equipment base (1) flat, lift the handle assembly (2) so that it is upright, then insert the M8

locking bolt (3) through the handlebar on the left-hand side of the machine and into the belt platform

bracket (A). Firmly tighten the bolt by hand.

3. Rotate the console (4) forward so the mounting tabs (B) on the underside of the console handles enter

the handle columns, then secure it using 2 M8 screws (5) and washers (6). Tighten the screws (rotate

right) using the Allen key.

Once assembled, the machine ready for use.

2

1

B

A

3

6

5

4

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX

TRX1 Elite Electric Treadmill

Folding / Unfolding

Always set-up the equipment on a flat and level surface. If the equipment "rocks", (if applicable)

rotate the feet under the front of the machine to move up or down as needed so the equipment is

steady.

To fold, remove (rotate left) the locking bolt (A) securing the belt platform (B) to the handlebar assembly (C).

Lift the end of the belt platform (B) until it is vertical, then secure it to the handlebar assembly at location X

using the locking bolt (A). Firmly tighten the bolt by hand.

To unfold, hold the belt platform firmly, then remove (rotate left) the locking bolt from location X. Gently lower

the belt platform down so it rests on the floor. Secure the belt platform to the handle assembly using the

locking bolt (A) and firmly tighten by hand (rotate right), against the handle mounting frame

Moving

The unit can be tilted onto its wheels for easy moving and storage.

With the equipment in the folded and locked position, firmly grasp the

handlebar with both hands. Next, carefully tilt the equipment back until

it rolls freely on the transport wheels.

Do not attempt to move the equipment while it is in the

unfolded position.

B

A

C

X

A

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX

TRX1 Elite Electric Treadmill

Operation

Safety Tether and Emergency Stop

The equipment comes equipped with a "safety tether" (C).

The safety tether must be attached to the console in order

for the equipment to run. It is designed to attach to your

clothing so that if you leave or fall from the equipment it will

stop automatically, helping prevent injury.

Before beginning a workout session, ensure that the safety

tether is properly placed onto the console and that the clip is

securely attached to your clothing.

Note: If the equipment is on, but the safety tether is not attached, "- -" shows on the display and the

equipment cannot be started.

Program and Manual Modes

The equipment features two basic operating modes:

Note: The equipment must not be running in order to change or select modes.

•Manual Mode –The equipment is being used, but not running a pre-set program (see Program mode,

below). In this mode, the equipment can be set to stop automatically at a pre-set session duration,

distance or calories used value. To enter Manual mode, press MODE (see Manual Mode Training).

Note: You can also press START to use the equipment without setting a duration or distance. In this mode,

the equipment will stop automatically after 60 minutes.

•Program Mode –The equipment runs through a pre-set routine where it will apply a particular speed for

a period of time. There are 12 pre-set routines to choose from ("P1" to "P12"). In Program mode, the unit

automatically changes speeds. At each speed change, the unit beeps for 3 seconds before changing

speed, as a warning. To enter Program mode, press PROG when the equipment is on but not running –

the display flashes "P01". Press PROG until you reach the required program (see Program Mode

Training).

Console and Functions

The equipment features a computerized display that provides

you with controls for operating the unit as well as workout

information, such as duration, speed, distance travelled etc.

To use the equipment:

1. Plug the equipment into the electrical supply.

2. Place the power switch (D), located at the front of the unit,

in the "ON" ("I") position.

3. Attach the safety tether to the safety tether location on the

console.

4. Operate the equipment as desired.

Always stand on the side rails when starting the equipment. Never stand on the belt then start the

machine.

D

C

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX

TRX1 Elite Electric Treadmill

Control

Description

Display

Shows current information, such as current speed, elapsed or remaining time, used or

remaining calories, current pulse etc. The range of values for each is:

•Time –5:00 to 99:59 minutes / seconds.

•Distance –1.0 to 99.9 kilometres.

•Speed –0.8 to 14.0 km/h.

•Calories –20.0 to 999 calories.

•Pulse –50 to 200 beats/minute (BPM). Shows above " " symbol.

Note: When displaying pulse, you must have both hands on the metal sensors on each

handle. • To approximately convert calories to kilojoules, multiply the number of calories by 4.

START

Press to start the equipment.

STOP

Press to stop the equipment.

PROG

Press to select a pre-set program. Each press moves to the next program in sequence (P1

to P2, P2 to P3 and so on). Hold the button down to more quickly step through programs.

MODE

When in Manual mode and the equipment is not running, press to switch between time,

distance or calorie setting options.

SPEED

When the equipment is running, press +to increase speed. Press –to reduce speed. Each

press changes speed by 0.1 km/h. Hold the button down to more quickly change speed. The

speed range is 0.8 to 14.0 km/h. Speed can also be adjusted using the right-hand handle

mounted +and –buttons.

When in Manual mode and the equipment is not running, press +or –to adjust either time,

distance or calories target values.

When in Program mode and the equipment is not running, press +or –to adjust the

program time value.

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX

TRX1 Elite Electric Treadmill

Manual Mode Training

"Manual" mode operation gives you the freedom to adjust the equipment operation as desired at any time. In

this mode, once started, the equipment runs until you stop it or can be pre-set for a session duration,

distance or target number of calories to use.

1. Turn on the equipment.

2. Press START. The equipment counts down 3 seconds, then starts running at the slowest speed.

3. Adjust speed using +and –as required.

4. When finished, press STOP.

Setting a Pre-Set Session Duration

When training to a pre-set session duration, the equipment stops automatically once the timer counts down

to 0.00.

1. Turn on the equipment.

2. Press MODE so that "TIME"is flashing at the bottom of the display.

3. Adjust the session duration using +and –as required. Duration can range from 5 to 99 minutes.

4. Press START. The equipment counts down 3 seconds, then starts running at the slowest speed.

5. Adjust speed as required.

Setting a Pre-Set Session Distance

When training to a pre-set session distance, the equipment stops automatically once the travelled distance

reaches 0.00.

1. Turn on the equipment.

2. Press MODE so that "DIS"is flashing at the bottom of the display.

3. Adjust the session distance using +and –as required. Distance can range from 1 to 99 km, in 1.0 km

increments.

4. Press START. The equipment counts down 3 seconds, then starts running at the slowest speed.

5. Adjust speed as required.

Setting a Target Calorie Value

When training to a target calorie value, the equipment stops automatically once the number of calories used

for the session reaches the target value.

1. Turn on the equipment.

2. Press MODE so that the "CAL" is flashing at the bottom of the display.

3. Adjust the target calorie value using +and –as required. The value can range from 10 to 990 calories, in

1 calorie increments.

4. Press START. The equipment counts down 3 seconds, then starts running at the slowest speed.

5. Adjust speed as required.

PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX PROFLEX

Proflex TRX1 Ultra Manual de usuario

Manuales populares de Rueda de andar de otras marcas