
2
Mount the gimbal on the docking bracket and
secure it by pressing the lever clamp.
Mount the Gimbal Docking Bracket on the C-
Stand as shown in the image.
Note: Proaim Gimbal Docking Bracket aaches
to any 5/8″ pin on C-Stands/ Cart.
Universal Gimbal Docking Bracket Setup
Aer inserng the 5/8″ male baby pin, ghten
the bolts of the docking bracket with the help
of an Allen key. Then, to extend the length of
the index markings, loosen the bolts using an
Allen key.
Extend the length of the index markings as per
your requirements and then open the lever
clamp as shown in the image.
Loosen the knob of the docking bracket
slightly and insert the 5/8″ male baby pin into
the 5/8″ female baby pin.
Lights with 5/8" mounng are compable with
docking bracket's 5/8" male baby pin.