PRO SIGNAL PSG08201 Manual de usuario
PSG08201
BNC MALE TO RJ45 FEMALE VIDEO TRANSCEIVER
WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
• This device is an HD-TVI, AHD, HDCVI, CVBS video transceiver that can use a cost
effective network cable to send the signal up to 300M, with resolution up to 4K (8MP).
• Resolution up to 4K (8MP).
• Signal extension up to 300M over UTP CAT5e (or greater) cable.
• Male BNC to RJ45 connector design.
• No power required.
• Transceiver unit
• User’s Manual
Please read these instructions carefully before use and retain for future reference.
NOTE:
The cabling must be kept away from any equipment with electromagnetic wave, i.e.:
microwave, radio equipment, high voltage lines.
• Before installation, please make sure all devices you wish to connect have been
powered off.
• Connect one transceiver to the BNC output connector of the source equipment and
one to the input BNC connector on the destination device.
• Connect the two transceivers using CAT5e (or better for longer distance/higher
resolution) UTP cable.
NOTE: this is not an Ethernet device - do not connect via an Ethernet.
• Power on both source and destination devices.
SPECIFICATIONS
Video Format HD-TVI, AHD, HDCVI, CVBS
Max. Video Resolution 8MP (4K)
Transmission Distance
using CAT5 UTP
HD-TVI 100M at 4K
AHD 200M at 4K
HDCVI 200M at 4K
CVBS 300M at NTSC/ PAL
CCTV 400m colour
CCTV 600m mono
Bandwidth 50Hz to 60MHz (-3dB)
Video Input/ Output 1 x BNC Male(1V p-p, 75Ω)
Link Interface 1 x RJ45 (UTP)
Operation 0 to 55oC
Storage -20 to 85oC
Humidity Up to 95%
Dimensions 69 x 25 x 20.7mm
Weight 30g
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL &
ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China
PO Box 13362 Dublin 2
PR2 9PP
Man Rev 1.0
Otros manuales de Transceptor de PRO SIGNAL
