Pro-Ject Audio Systems Box S USB Manual de usuario

INSTRUCTION MANUAL

Pro-Ject Remote Box S

Inhalt

Connections....................................................................4

USB Connection..................................................................................4

Mains power connection ......................................................................4

Connection of infrared Repeaters..........................................................4

Safety Instructions ...........................................................4

Front panel .....................................................................5

Suggestions for placement...............................................5

Setting up the Remote Box S............................................5

Installation of Java...............................................................................5

Installation and Start of the configuration program .................................5

Start of the configuration......................................................................6

Search for your WLAN .........................................................................6

Entering the WLAN access code............................................................6

Finishing the configuration ...................................................................6

Operation of the Remote Box S with the App „Box Control“7

Initial start of the app...........................................................................7

Select the Remote Box S .......................................................................7

Getting started with the app .................................................................9

Commands for Pro-Ject devices............................................................9

Programming of remote commands ....................................................10

Settings menu....................................................................................11

List of command windows...................................................................11

Sorting the control windows................................................................11

General Settings................................................................................12

Specifications ................................................................12

Service..........................................................................12

Warranty.......................................................................12

Pro-Ject Remote Box S

Dear music lover, thank you for purchasing the Pro-Ject Audio Remote Box S.

In order to achieve maximum performance and reliability, you should study this instruction manual carefully.

Hazard warning for the user, the unit or possible misuse

Important notice

With the Remote Box S and the free Pro-Ject Box Control app you are able to control all Pro-Ject units with a infrared

remote control via WLAN. The Box Control app is available for iOS units, e.g. the Apple iPhone, as well as for

smartphones and tablets with the Android operating system. The Remote Box S simplifies and unifies the control of your

complete hi-fi system tremendously. All infrared codes of the Pro-Ject units are already stored in the app – which btw. is

able to control all Stream Box units from Pro-Ject except the Stream Box DS even more directly via WLAN, without infrared

commands. The Remote Box S can even control devices from other manufacturers, the respective infrared (abbreviated IR)

command code can be programmed into the app very easily.

Connections

Pro-Ject Audio Systems

Vienna, Austria

USB AB

Make all connections while the Remote Box S is disconnected from the power supply.

USB Connection

For configuration the Remote Box S must be connected to a PC via USB. The USB connection cable is included.

Mains power connection

The unit is supplied with a power supply suitable for your country’s mains supply. Check the label before connecting to

ensure compliance with the mains rating in your house. Connect the low voltage plug from the power supply to the Power

9V  socket before connecting the power supply to the mains.

It isn’t possible to disconnect the Remote Box S completely from mains power by a power button. Therefore it consumes a

small amount of power permanently. If you are not going to use the unit for an extended period of time, e.g. vacation, we

suggest to disconnect it from the AC mains.

Connection of infrared Repeaters

External infrared repeaters (available as accessory) can be connected to the 3,5mm jack plug socket to enhance the range

of the Remote Box S or for installation in a second room. The jack plug socket A has no functionality.

Safety Instructions

Use the Remote Box S only with the DC 9V/2A power supply it is delivered with.

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in

your area meets the voltage requirements printed on the power supply. The power cord is used to disconnect the

unit from the mains. Make sure that the power cord is easily accessible at all times. Never handle the device, the

power cord/power supply while your hands are wet or damp.

Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such as a

flower vase on or near the device. Never spill any liquid on the device or the power supply. Never place any

naked flame sources, such as lighted candles on or near the device. The product shall not be used in damp or

wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.

Front panel

Remote Box S

There are no controls on the front panel of the Remote Box S. The four small transparent blue plastic domes in the middle

are the outlets for the very powerful infrared transmitter integrated into the unit. The opening to the right of them contains

the infrared receiver necessary for programming the control codes of devices from other manufacturers into the system.

Suggestions for placement

The Remote Box S can be positioned at the same place as the hi-fi system. The integrated infrared (IR) transmitter is very

powerful, therefore the front panel can point into the same direction as the other units of the hi-fi system. The infrared

signals coming from the Remote Box S will be reflected from the walls to the hi-fi system and even then strong enough to

be detected by their infrared receivers. In case the room is very big or its walls have a low reflection, it’s possible that the

IR signal is not strong enough and the controlled units are not able to receive it. Please place the Remote Box S in this case

with the front plate facing to the direction of the hi-fi system or use an external IR transmitter (available as accessory) which

can be placed invisibly and facing to the hi-fi devices.

Setting up the Remote Box S

For the setup of the Remote Box S a Computer (Windows, Apple, or Linux) with a Java installation, Internet access and the

access code for the Wireless LAN (WLAN) is necessary.

Installation of Java

In Case that Java isn’t installed on your computer (or you don’t know or can’t find it out), go to the internet page http://

www.java.com/en/download/installed.jsp. There you can check, if you have Java on your computer and which version it

is (we recommend to use always the newest version). If you have to install Java, download the actual version and start the

installation by double-clicking on the downloaded file. Follow the instructions shown on the screen for the installation.

Installation and Start of the configuration program

Please connect the Remote Box S now to power and to your Computer via USB. After that, please download the

configuration program „ProJect-WLANCONFIG.zip“ from the internet page http://www.audiotra.de/startseite/marken/pro-

ject-box-design/systemfernbedienung/remote-box-s/remote-box-s.html. Go to the folder in which you have downloaded

the zip archive and open it by double-clicking. Store all files in the archive into a folder of your choice and open this

folder. If you use a Windows computer, please start the configuration program „ProJect.WLANConfig.Windows.exe“ by

double-clicking on it. With a Linux Computer please use „ProJect.WLANConfig.jar“. On an Apple computer you first

have to install a special driver by double-clicking on „FTDIUSBSerialDriver_v2_2_16.dmg“. After that you can start the

configuration program by double-clicking on „ProJect.WLANConfig.jar“.

Start of the configuration

The program window „WLAN Config“ opens and you see your Remote Box S

as list item (“WiFi Controller”, see picture). Choose it by clicking on this line

and the click on “Configure”, to start the configuration for WLAN access of the

Remote Box S.

Search for your WLAN

The window „WLAN Device Configuration“ opens (see picture). Click

on “Search” in the upper right corner to start the search for a wireless

network. A small window „Reading WLAN-Status“ opens. After the search

was successful, the small window closes automatically.

Entering the WLAN access code

Select your own WLAN in the dropdown menu „SSID“ (the topmost on

the left side). Now enter your WLAN access code into the field „WLAN

preshared Key“ and click on „Set Mode“. The window „WLAN Device

Configuration“ will close now.

Finishing the configuration

In the remaining window „WLAN Config“, click on „Exit“. Your configuration will

be stored. This takes two to three minutes. Please don’t disconnect your Remote

Box S from mains or the computer during this time. The storing process is

finished, when the light that shines through the A and B connectors on the back

of the units changes from red to green. Your Remote Box S is now registered in

your WLAN and ready for use.

Now you can disconnect the Remote Box S from mains and the computer and

place it in an appropriate place. Please take care that the IR signals can reach

the devices you want to control from this position.

Operation of the Remote Box S with the App „Box Control“

The app „Box Control“ is available for Apple- and Android devices in the respective app stores free of charge. For their

use access of the respective Apple- or Android devices to the same wireless network as the Remote Box is necessary.

Attention: The app can’t be used, if the Remote Box S wasn’t configured before as described above!

Initial start of the app

At the first start of the app, the setup wizard comes up automatically. Tap on “Next” to

start the configuration.

Select the Remote Box S

Select the Remote Box S on the first page „Select your Devices“ (see right) and tap on

“Next”. Information regarding the configuration of the Pro-Ject Stream Box devices

shown below the Remote Box S can be found in their respective manuals.

You can skip the next two pages „Select

your Media Library“ (left picture) and

„Select your Media Player“ (right picture)

by tapping on “skip”. They refer to the

configuration of Pro-Ject Stream Box

devices only.

Selection of the devices to be controlled

In the next window, „Select your Remote Controls“ select (see right) the devices you

want to control with the app and tap on “next”. Now the setup is complete.

Getting started with the app

The setup wizard closes and you see the start page of the app (see right). For each

of the devices you selected in the step before, a control page was created. It’s

symbolized with a light dot in the black bar at the bottom. The dot of the control

page that you actually see is shown lighter than the others. The symbol on the

rightmost side is for the settings menu.

You can change between the control windows with a simple wipe on the display to

the left or right.

Commands for Pro-Ject devices

Change to the desired control window

by wiping in the proper direction. (shown

here is the second window /dot , see left

picture). If you selected a Pro-Ject device,

all remote commands are already pre-

stored and the control window is ready

for use.

In the upper right you see the symbol of

a padlock. It enables the programming

of new commands when it’s open (left

picture), but prevents any programming,

when it’s closed (right picture). This

function allows for re-programming

of already stored commands and the

programming of new ones. See below

for a description how to program

commands.

Programming of

remote commands

If you selected command windows for

devices not made by Pro-Ject, you have

to program the desired commands by

yourself. The example shows a television

control (left picture).

To program IR commands, tap on the

padlock in the upper right to open

it. Then tap on the control item you

want to program, e.g. “Menu”. Now

an insert (right picture) asks you to

press the respective key on the original

remote controller. Aim the controller at

the Remote Box S during this. As soon

as the command is recognized by the

Remote Box S, the insert disappears and

the desired command is successfully

programmed to the selected control item.

You can abort the programming at any

time by tapping on a place outside of the

insert.

Proceed with all desired command items

in the same way until all IR commands

are programmed. Finally, tap on the

padlock symbol again (left picture) to

lock the programming mode and prevent

unwanted changes. You can open the

padlock again at any time to change or

add commands.

Repeat this procedure in the same way

for all desired command windows. You

can change between the windows with a

simple wipe to the left or right.

With an upward wipe out of the black

bar at the bottom you can bring up the

overview menu alternatively and change

to the desired command window directly.

Otros manuales para Box S USB

Tabla de contenidos

Otros manuales de Mando a distancia de Pro-Ject Audio Systems

Pro-Ject Audio Systems

Pro-Ject Audio Systems BOX DESIGN Control it RS Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación