Pro-face ST3200 Series Manual de usuario

1/34

Easy! Smooth!

ST3200 Series->GP4000M Series

Replacement Guidebook

3rd Edition Jan. 2019

2/34

Preface

This guidebook introduces the procedures to replace a unit in ST3200 series with a

GP-4201TM unit.

Model in use

Model No.

Recommended Substitution

ST-3201A

AST3201-A1-D24

GP-4201TM

Safety Information

HAZARD OF OPERATOR INJURY, OR UNINTENDED EQUIPMENT DAMAGE

Before operating any of these products, be sure to read all related manuals thoroughly.

Failure to follow these instructions can result in death, serious injury or unintended equipment

damage.

 3/34 
 
Contents 
PREFACE 2 
SAFETY INFORMATION 2 
HAZARD OF OPERATOR INJURY, OR UNINTENDED EQUIPMENT DAMAGE
 2 
CONTENTS 3 
CHAPTER 1 SPECIFICATION COMPARISON 5 
1.1 SPECIFICATIONS OF ST-3201A AND GP-4201TM 5 
CHAPTER 2 COMPATIBILITY OF HARDWARE 7 
2.1 LOCATIONS OF CONNECTORS 7 
2.2 TOUCH PANEL SPECIFICATIONS 8 
2.3 DISPLAY COLORS (FOR GP-3301L/3302B AND ST-3301B ONLY) 8 
2.3.1 BLINK 8 
2.3.2 DISPLAY COLORS 8 
2.4 PANEL CUTOUT DIMENSIONS 8 
2.5 EXTERNAL DIMENSIONS 9 
2.6 TRANSFER CABLE 9 
2.7 INTERFACE 10 
2.7.1 SERIAL INTERFACE 10 
2.7.2 CF CARD INTERFACE 10 
2.8 CLOCK 10 
2.9 PERIPHERAL UNITS AND OPTION UNITS 11 
2.9.1 BARCODE READER CONNECTOIN 11 
2.9.2 PRINTER CONNECTION 11 
2.9.3 EXPANSION UNIT 11 

 4/34 
9.4 ISOLATION UNIT 11 
10 POWER CONSUMPTION 12 
11 BACKUP MEMORY (SRAM) 12 
12 ABOUT LADDER MONITOR 12 
13 ABOUT PRO-SERVER 13 
14 OTHER NOTES 13 
CHAPTER 3 REPLACEMENT PROCEDURE 14 
1 WORK FLOW 14 
2 PREPARATION 15 
3 RECEIVE SCREEN DATA FROM GP/ST3000 SERIES 16 
4 CHANGE THE DISPLAY UNIT TYPE 19 
5 TRANSFER SCREEN DATA TO GP-4201TM 21 
6 DIFFERENCES OF SOFTWARE 25 
CHAPTER 4 COMMUNICATION WITH DEVICE/PLC 26 
1 DRIVERS 26 
2 SHAPES OF COM PORTS 26 
3 SIGNALS OF COM PORTS 27 
3.1 DIFFERENCES OF COM1 SIGNALS 27 
3.2 DIFFERENCE OF COM2 SIGNALS 29 
4 MULTILINK CONNECTION 29 
5 CABLE DIAGRAM AT THE TIME OF REPLACEMENT 30 
CHAPTER 5 APPENDIX 31 
1 WHEN THE DISPLAY UNIT TYPE CANNOT BE CHANGED, 31 
 

5/34

Chapter 1 Specification Comparison

1.1 Specifications of ST-3201Aand GP-4201TM

ST-3201A

GP-4201TM

Display Type

Monochrome Amber/Red

LCD

NEW! TFT Color LCD

Display Colors, Levels

Monochrome, 8 levels

UP! 65,536 colors

Display Resolution

QVGA (320x240 pixels)

Panle Cutout

Dimensions (mm)

W118.5xH92.5mm

NEW! φ22mm

->See 2.4

External

Dimensions

(mm)

W130xH104xD40mm

NEW!

W118xH98.15xD56.3mm

*The rear module is included.

->See 2.5

Touch Panel Type

Resistive film (Analog) ->See 2.2

Memory

Application

6MB

UP! 8MB

Backup

320KB

128KB ->See 2.11

Backup Battery

Secondary Battery

(Rechargeable Lithium

battery)

Rated Input Voltage

DC 24V

Serial

I/F

COM1

D-Sub 9 pin (plug)

RS-232C

D-Sub 9 pin (plug)

RS-232C/422/485

COM2

D-Sub 9 pin (plug)

RS-422/485

->See 2.7.1 / Chapter 4

6/34

Ethernet I/F

NEW! 10BASE-T/100BASE-TX

Printer I/F

USB

- ->See 2.8.2

USB Type A

✔

✔->See 2.6

USB Type mini B

7/34

Chapter 2 Compatibility of Hardware

2.1 Locations of connectors

Connector locations on ST3000 series and GP-4201TM are as follows:

ST-3201A

GP-4201TM

Interface names

ST-3201A

GP-4201TM

Power Connector

Serial Interface (COM1)

Serial Interface (COM2)

Ethernet Interface

USB Interface (Type A)

USB Interface (Type miniB)

8/34

2.2 Touch panel Specifications

GP-4201TM adopts Analog resistive film type.

Because of it, GP-4201TM doesn’t support 2-point touch input (touching 2 points on the

screen at the same time). Even if two different points are touched at the same time,

that’s recognized as touch input on the middle coordinates between those two points.

2.3 Display Colors (for GP-3301L/3302B and ST-3301B only)

2.3.1 Blink

GP-4201TM does not have a Blink feature.

Replace ST-3201A with GP-4201TW if feature is nedded.

2.3.2 Display Colors

ST-3201A has monochrome LCD, but GP-4201TM has TFT color LCD. After replacement,

the black and white display changes to the color display.

When data of a monochrome model are converted to a color model with GP-Pro EX, the

data may be displayed in colors except black and white depending on a setting of

GP-Pro EX. After conversion, please confirm the display colors of drawing or parts on

screens just in case.

2.4 Panel cutout dimensions

The panel cutout of GP-4201TM is a φ22-mm circular hole. The panel cutout shape and

dimensions of GP-4201TM are different from those of ST3000 series.

9/34

2.5 External Dimensions

For GP-4201TM, the front face display module (display part) and the back face main

module are separated. Compared with ST3000 series, the tickness of the part

appearing on the installation panel differs.

2.6 Transfer cable

To transfer screen data to GP-4201TM, use a USB transfer cable or Ethernet. Use a USB

data-transfer cable (model: ZC9USCBMB1) or a commercial USB cable (USB A/mini-B).

Please note that the cables (CA3-USBCB-01) for ST3000 series cannot be used for

GP-4201TM.

ST-3201A

GP-4201TM

(the thickness of

the front bezel)

5mm

16.2mm

(the depth of the

back face)

35mm

40.1mm

10/34

2.7 Interface

2.7.1 Serial Interface

For the COM ports of ST3000 series and GP-4201TM, the signal of the serial port is

different. To know the details about them, see [4.2 Shapes of COM ports] and [4.3

Signals of COM ports].

Because of it, the existing PLC connection cables cannot be used as they are. If you

use the existing connection cables, see [4.5 Cable Diagram at the time of

replacemet].

When the both COM1 and COM2 ports on ST3000 series have setting, devices can be

connected to the COM1 port only after replacement with GP-4201TM.

- When the COM1 port is used for RS-232C connection and the COM2 port for

RS-422/485 connection:

Replace with GP-4201TW instead of GP-4201TM.

- When the both COM1 and COM2 ports are used for RS-422/485 connection:

Please contact our sales office in your region.

(http://www.pro-face.com/customer/contact.html)

2.7.2 CF Card Interface

GP-4201TM is not equipped with a CF card slot. You can use an USB storage device

instead of a CF card but GP-4201TM supports the function of saving sampled data in

CSV only (GP-Pro EX Ver. 3.01 or later is required).

You can use the storage devices below instead after replacement:

GP-4301T

SD card

GP-4301TW

USB storage device

2.8 Clock

There’s no battery in GP-4201TM. When the GP’s power is turned OFF, the clock data

is reset. Using the Clock Update Settings of GP-Pro EX allows you to take in the clock

data of the connected device. For details, refer to 5.2 Adjusting the Time in the

GP-Pro EX Reference Manual.

Otros manuales para ST3200 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de grabación de Pro-face

Pro-face

Pro-face GP3000 Series Manual de usuario

Pro-face

Pro-face GP3000 Series Manual de usuario

Pro-face

Pro-face AGP-3300 Series Manual de usuario

Pro-face

Pro-face ST3200 Series Manual de usuario

Pro-face

Pro-face ST3000 Series Manual de usuario

Pro-face

Pro-face GP-2401T Manual de usuario

Pro-face

Pro-face GP-4114T Manual de usuario

Pro-face

Pro-face LT-4201TM Manual de usuario

Pro-face

Pro-face GP2000H Series Manual de usuario

Pro-face

Pro-face GP-4100 series Manual de usuario

Pro-face

Pro-face GP-4100 series Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado