Prismatibro Prisma Light Elton Manual de usuario
MANUAL
MOUNTING AND INSTALLATION
2Prisma Light | prismatibro.se
CONTENT
Product facts...............................................................................................................................................................................................................................3
Mechanical installation........................................................................................................................................................4-7
Electrical Installation................................................................................................................................................................................8
Deployment
Prisma Light Elton DALI..............................................................................................................................................................9
Prisma Light Elton Remote.............................................................................................................................................9
Prisma Light Elton Detect...................................................................................................................................................9
Prisma Light Elton Nema.......................................................................................................................................................9
Prisma Light Elton SR..........................................................................................................................................................................9
Gateway installation.......................................................................................................................................................... 10-11
Troubleshooting......................................................................................................................................................Back cover
Service and maintenance........... .........................................................................................Back cover
Warranty..................................................................................................................................................................................................Back cover
Recycling and packaging......................................................................................................Back cover
Support, contact information............................................................................Back cover
3
prismatibro.se | Prisma Light
PRODUCT FACTS
PRODUCT DESCRIPTION Prisma Light Elton is a luminaire with
LED-technology.
AREA OF USE Outdoors: Main roads, urban roads,
bicycle paths, parking lots, industrial areas,
skiing tracks, highways, harbours
MOUNTING HEIGHT Maximum 20 meters
WEIGHT, kg Model
Prisma Light Elton 1-S 4,5
Prisma Light Elton 1-M 6,5
Prisma Light Elton 1-L 9,5
Prisma Light Elton 1-XL 13,5
MEASUREMENTS, mm Model Length Width Height
Prisma Light Elton 1-S 433 260 99
Prisma Light Elton 1-M 565 330 110
Prisma Light Elton 1-L 665 381 118
Prisma Light Elton 1-XL 865 455 125
WIND RESISTANCE Model
AREA, m2Prisma Light Elton 1-S 0,024
Prisma Light Elton 1-M 0,035
Prisma Light Elton 1-L 0,043
Prisma Light Elton 1-XL 0,058
4Prisma Light | prismatibro.se
Pole tting
The luminaire can be mounted on a pole top as well as a pole with arm.
The picture below show how you release, turn and adjust from a pole top to
a pole with arm.
Tools
Hex screw, size 6: Pole tting - Housing
1-S, 1-M Hex screw, size 4: Pole tting - Pole
1-L, 1-XL Hex screw, size 5: Pole tting - Pole
1
2
6
6
6
6
MECHANICAL INSTALLATION
5
prismatibro.se | Prisma Light
Mount on pole top or arm
Use you hands or a screwdriver mith maximum torque: 8Nm +/- 2 Nm
Adjust the angle
Use you hands or a screwdriver mith maximum torque: 8Nm.
±°
±10° Prisma Light Elton 1-S
±10° Prisma Light Elton 1-M
±15° Prisma Light Elton 1-L
±15° Prisma Light Elton 1-XL
6
6
4
4
5
5
6Prisma Light | prismatibro.se
Prisma Light Elton 1-S
Grab the clasp in the
front of the luminaire,
pull up.
The lid is now easy to
lift up and let it rest
in full open position.
OPEN
1
2
7
prismatibro.se | Prisma Light
Grab the clasps at both
sides of the luminaire,
pull up.
The upper part with
all the electronics is
now easy to lift and
to let it rest in full
open position.
Prisma Light Elton 1-M
Prisma Light Elton 1-L
Prisma Light Elton 1-XL
OPEN
1
2
8Prisma Light | prismatibro.se
ELECTRICAL INSTALLATION
Supply voltage 220-240V AC, 50 Hz
Total power 5-240W depending on the model
230 V CLASS II
• Prisma Light Elton DALI
• Prisma Light Elton Remote
• Prisma Light Elton Detect
• Prisma Light Elton Nema
• Prisma Light Elton SR
230 V CLASS I
• Prisma Light Elton DALI
• Prisma Light Elton SR
CLASS II
1. Attach the luminaire to the pole,
adjust according to pages 4-5
2. Connect Live (Brown) and
Neutral (Blue) in the fuse holder.
3. If necessary, connect
DALI (Black, Gray)
4. Turn on voltage
CLASS I
1. Attach the luminaire to the pole,
adjust according to pages 4-5
2. Connect Live (Brown) and
Neutral (Blue) in the fuse holder
3. Connect Protective Earth
(Yellow-Green) on the models
of CLASS I
4. If necessary, connect
DALI (Black, Gray)
5. Turn on voltage
NOTE!
It is important to check that there are no bad connections with the
Neutral (Blue) wires in the system. A poorly connected Neutral can
lead to electrical surges that will aect the warranty.
9
prismatibro.se | Prisma Light
DEPLOYMENT AND USE
Prisma Light DALI
• With a DALI-driver it is possible to change the power output later on as
well as the night reduction.
The adjustments can be made in dierent ways.
Alternative 1 You go all the way up to the luminaire that is mounted
on the pole and you make the adjustments close to the driver.
Alternative 2 You buy the luminaire with a 5-wired cable, then you
can make the adjusments down at the access point in the pole.
Prisma Light Remote
INSTALLATION
• Power on to the luminaire.
• Prisma Light Elton should now have
the factory setting that the customer
wanted when ordered.
• Prisma Light Elton has a PCB with
built in IR-communication.
Prisma
USE
• The settings are changed
with a remote control.
Manual can be downloaded from:
www.prismatibro.se
Prisma Light Detect
INSTALLATION
• Power on the luminaire
When it starts up the luminaire will blink as it calibrates it’s self.
Before it is programmed by the customer -see installation manual control systems
- the luminaire will be att 40% when there is no detection and 50% at detection.
At this stage it doesn’t communicate with other luminaries.
Prisma Light Nema
Turn on the power. The luminaire is delivered with maximum power output from
the driver, which later can be adjusted with the customers own Nema-control.
Alternatively, tell us the settings that should apply before you
connect your Nema-control and we will make those settings at
the factory.
Prisma Light SR
Turn on the power. The luminaire is delivered with maximum
power output from the driver, which later can be adjusted with
the customers own SR-control. Alternatively, tell us the settings
that should apply before you connect your SR-control and we
will make those settings at the factory.
CONTROL SYSTEMS
MANUAL
10 Prisma Light | prismatibro.se
GATEWAY INSTALLATION
Light cabinet
The gateway should be installed within 30 meters from the closest
Detect-luminaire.
The gateway will communicate wirelessly with the luminaries.
The installation should be done by the manufactorer or by someone
educated by the manufactorer.
* The installer should contact the producer of the light cabinet to get
the correct instruction about making holes in the light cabinet.
1Drill a hole for the power cable, Ø 20 mm*
2Rubber gasket:
Add the rubber gasket to the backside of the Gateway.
3Connect the power cable to the backside of the Gateway:
Press down the coupling ring, and keep turning the ring
(clock wise) until you feel a
”click”. Now the connector
is locked.
4Mount the Gateway to
the light cabinet - use
the supplied screws.
1
4
3
2
Tabla de contenidos
Otros manuales de Linterna de Prismatibro
