Prism Medical UK C800 Manual de usuario

Owner’s Manual

Use and Care

Troubleshooting

Warranty Information

C 800 by Prism Medical

Introduction ................................................................... 2

Overview....................................................................... 2

Components of lift system ............................................. 3

Component List ............................................................. 4

Specifications................................................................ 4

Cautions........................................................................ 6

Attaching the airline to the lift ........................................ 7

Operation

Turning the lift ON and Automatic OFF.................... 8

Raising/Lowering the carry bar ................................ 9

Moving the lift .......................................................... 9

Moving the “H” system traversing beam .................. 10

Attaching the carry bar to the lift…………………………..11

Return to Charge .......................................................... 12

Basics in transferring an individual ................................ 13

C 800 Tandem Bariatric System…………………………...16

Charging the lift ............................................................. 18

Constant Charger.......................................................... 19

LCD Display Functionality ............................................ 20

Emergency Stopping..................................................... 22

Emergency Lowering..................................................... 22

Emergency Manual Raising or Lowering ....................... 23

Cleaning and Disinfection………………………………….24

Trouble Shooting........................................................... 25

General inspection and maintenance ............................ 26

Lift Accessories............................................................. 27

Service record history.................................................... 28

Warranty ....................................................................... 32

C800

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 2

CAUTION: DO NOT ATTEMPT TO USE THIS EQUIPMENT

WITHOUT FIRST UNDERSTANDING THE CONTENTS OF

THIS MANUAL.

Introduction

Overview of C 800 lift system

Before using this equipment, and to ensure the safe operation of your C 800 lift, carefully read this entire

manual, especially the section on “Cautions”. The C 800 is designed to be used in conjunction with Prism

Medical lift track, accessories and slings. Please refer to any user guides supplied with these components and

refer to them while reviewing this manual.

Should any questions arise from reviewing this manual contact your local authorized Prism Medical dealer.

Failure to comply with warnings in this manual may result in injury to either the operator, or the individual

being lifted/transferred. Damage to the lift and/or related components may also occur. Be sure that the contents

of this manual are completely understood prior to using this piece of equipment.

Store this manual with the documents included with the lift system and sling (s). Contents of this manual are

subject to change without prior written notice.

The C 800 is a lifting aid used by health care professionals and those providing care in the home to lift, posi-

tion and transfer clients or a disabled family member. The C 800 lift is part of what is termed ceiling lift tech-

nology which takes advantage of lifting from above and not from below or the side. Additionally the ceiling

lift does not take up valuable floor space as most traditional methods do. Finally, the ceiling lift makes it possi-

ble to move mobility impaired individuals with minimal strain or risk to the caregiver, while providing com-

plete safety, dignity and comfort for the client or family member.

The C 800 lift is one of three major components that make up this technology. The other two components are

the track and sling. The C 800 lift runs on the lift track which is securely mounted to the ceiling structure of

the institution, or home with the use of ceiling brackets. The track itself is made of specially designed alumi-

num and comes in many different shapes, lengths and configurations, and is custom tailored and installed to

meet your specific requirements. The third component, the sling, is a specially designed fabric accessory that

attaches to the lift by means of a carry bar and straps, and holds an individual while the lift, positioning or

transfer takes place. Both the track and sling are generally supplied with the lift at the initial time of purchase.

Please refer to any user guides supplied with the C 800 lift and reference them while reviewing this manual.

The C 800 is a fixed ceiling lift, that is, it always remains on the lift track. It has the ability to lift an individual

up from one location such as bed, move the individual along the track to another location and

finally lower the individual into a chair or bath. It is moved along the track in one of two ways. The first is by

manually moving the lift along the track with the aid of a caregiver. The second is by having the lift power it-

self along the track. The functions of lifting up or down, or moving to the left or right, are accomplished by

pressing buttons of a pneumatically (air) operated hand control. The hand control is attached to the lift by way

of a rubber airline tubing. Due to the design of the lift system, it takes very little effort to press a button to per-

form the desired motion.

Please refer to figures 1A and 1B to see sample floor plans of an installed lift system. Refer to figures 2A and

2B to familiarize yourself with the components of the C 800 lift. Figures 3A and 3B show the underside view

of the lift as it would be seen by an operator.

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 3

Components of lift system

Figure 1A - Sample floor plan showing basic components of

a ceiling lift system.

BAT HROOM

BEDROOM

TRACK

BED

BAT H

CHARGER

LIFT

BEDROOM

BED

BAT HROOM

BAT H

CHARGER

TRACK

LIFT

Figure 1B - Alternate sample floor plan showing basic

components of a ceiling lift system.

Figure 2A - Basic components of the ceiling lift

Figure 3A—Underside view of the lift

Figure 2B - The C 800 ceiling lift with standard

Emergency Stop/ Lowering.

Figure 3B - Photo of underside

Carry bar

Emergency Stop/

Lowering

Lifting tape (strap)

Track

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 4

Specifications of C 800 lift

Lift Motor: 24 VDC

Traverse Motor: 24 VDC (Optional at time of Purchase)

“H” Frame Traverse Motor: 24 VDC (Optional at time of Purchase)

Charger Alternate 1 Model: Soneil, 2403SRM30

Charger Alternate 1 Input: 100-240 VAC, 1.5 Amps, 50-60 Hz

Charger Alternate 1 Output: 24 VDC, 1.5 Amps

Charger Alternate 2 Model: Soneil, 2403SRM20

Charger Alternate 2 Input: 100-240 VAC, 1-0.6 Amps, 50-60 Hz

Charger Alternate 2 Output: 28.8 VDC, 1 Amp

Charger Alternate 3 Model: Mascot, 9940

Charger Alternate 3 Input: 100-240 VAC, 0.9 Amps, 50-60 Hz

Charger Alternate 3 Output: 29.5 VDC, 1.3 Amps

Batteries: 24 VDC (2 x 12 VDC) 5.0 AH, Sealed Lead Acid

Lift Case: Flame Retardant ABS

Hand Control: Pneumatic

Lifting Range: Up to 96” (2438mm)

Lift Weight: 24.5 lbs

Maximum Load: Standard maximum load in 800 lbs.

Duty Cycle: 1 minute ON, 9 minutes OFF

Rated Performance: 17-20 lifts at 800 lbs, 10% duty cycle, each lift being 24 inches at the middle of the

lifting range (from 54” strap out to 30” strap out) per full battery.

Please note: the lift has a break in period; breaking in of the lift will need to be done before

these numbers will be achieved. The breaking in period will vary from lift to lift and is

dependent on the frequency of use and the types of load being applied, the higher the load and a

greater frequency of use will break in the lift faster.

Service Life: 22,500 cycles or 10 years, whichever comes earlier

Type of Applied part: B type

Other Symbols Used:

The following components are included with your new C 800 lift system:

•C 800 lift (Manual or Motorized traverse)

•Pneumatic Hand Control

•Lift Charger (mounted on the wall or ceiling at the end of the track)

•Owner’s Manual

•Warranty Card

SLINGS: If a sling has been supplied with the lift refer to the instructions included with the sling.

ACCESSORIES: If additional accessories such as a turntable, or gate system have been supplied with the lift

refer to the instructions included with those items.

IMPORTANT: Before initial use, the lift unit must be charged for 4 hours. Refer to section titled

"Charging Instructions". The hand control airline tube must also be connected to the lift. If it is not

connected refer to the section titled “Connecting airline to the lift”.

Component List

Maximum load of the installed lift is deter-

mined by referring to the product label located

on side of lift.

Shipping/Storage Conditions:

Temperature: -40 to +70 ºC

Relative Humidity: 10 to 100% RH

Atmospheric Pressure: 500 to 1060 hPa

This symbol is used to point out instructions and information related to work place safety where

injury may occur if the information is disregarded or ignored. Follow these instructions, be careful and attentive

at all times.

Body Weight

Class II Equipment - electrical equipment in which protection against electric shock does not rely on

basic insulation only.

Emergency Stop

Normal Operating Conditions:

Temperature: 10 to 40 ºC

Relative Humidity: 30 to 75% RH

Atmospheric Pressure: 700 to 1060 hPa

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 5

Lifting Range

NOTES:

 Please use the following type of plug for C 800 lifts installed in the UK:

 Please use the following type of plug for C 800 lifts installed in Australia.

 The C 800 lift shall be connected to a center-tapped single phase supply circuit when

users in the United States connect the equipment to a 240 V supply system.

Models Table for C 800 Lift

Code Description

329180 C800 lbs. Manual Traverse

329181 C800 lbs. Manual Traverse (Omni)

329182 C800 lbs. Manual Traverse-Omni (Rev.G)

329183 C800 lbs. Manual Traverse (Rev.A)

329184 C800 lbs. Manual Quick Curve

329186 C800 lbs. Power Traverse RTC

329187 C800 lbs. Power XY Traverse

329190 C800 lbs. Power Traverse

329191 C800 lbs. Power Traverse (Omni)

329192 C800 lbs. Power Traverse -Omni (Rev.G)

329193 C800 lbs. Power Traverse (Rev.A)

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 6

●The C 800 must be installed prior to use. Contact your local authorized dealer to ensure that it is

properly installed. The C 800 must be installed only by persons authorized by Prism Medical Ltd.

●Under no circumstance should the C 800 track, lift and sling (s) or entire system be put in control of

a person who has not been properly trained in the use and care of this equipment. Failure to ad here

to this warning may result in serious injury to the operator, and/or the individual being lifted/

transferred.

●The C 800 lift, and associated track and sling (s) are not toys. Do not use it for unsafe practices. Do

not allow children to play with the lift or any of its’ components.

●The manufacturer's warranty is void if persons unauthorized by Prism Medical perform work on the

C 800 lift system.

● There are no user serviceable parts inside the cover. Do not remove cover screws, or open the lift

unit, as this will VOID THE WARRANTY.

●In facilities where more than one operator will be responsible for using the C 800 lift and associated

track and sling (s) it is imperative that all such members be trained in its’ proper use. A training

program should be established by the facility to acquaint new operators with this equipment.

●Never expose the C 800 lift directly to water. Warranty does not cover any misuse or abuse of the

lift system.

●To maintain optimum function, the C 800 should be inspected and maintained on a regular basis.

See the section titled “General Inspection and Maintenance”.

●Any accessories used with the C 800 including track and sling (s), should be checked to ensure that

they are in good working order. Check for signs of wear or fraying prior to use. Report any

unusual wear, or damage immediately to your local authorized Prism Medical dealer.

●The C 800 lift and associated lift, track and sling (s) are intended only for lifting and

transferring of a person. Prism Medical will not be responsible for any damage caused by the misuse,

neglect or purposeful destruction of the lift, and/or its’ associated components.

●Do not in any circumstance exceed the maximum allowable load of this lift. Refer to the

“Specifications” section of this manual, and/or the labels on the side of the lift.

●The installation of the lift, track, accessories, and sling are certified to a maximum load. Do not

exceed the maximum rated load of any of the components,

●There is a risk of explosion if the lift is used in the presense of flammable anaesthetics.

●The C 800 has features which improve it's electromagnetic immunity but immunity from

interference cannot be guaranteed. For best performance keep transmitting devices (cell phones and

hand-held radios) away from the lift.

●Ensure that a clear space is maintained around the lift and track. Move all curtain material and other

obstacles out of the way before performing a transfer.

 The charger must be located outside the patient vicinity at all times. The patient vicinity is the space

with surfaces likely contacted by the patient or an attendant who can touch the patient. This

space is 6 feet (1.83m) beyond the perimeter of the bed, examination table, etc., extending vertically

7-1/2 feet (2.29m) above the floor.

Cautions

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 7

Attaching the airline tube to the lift

Should the gray rubber airline that connects the lift to the hand

control become disengaged from the underside of the lift it must

be re-connected in order for the lift to work properly.

The rubber airline may become disconnected for the following

reasons:

1) The lift is pulled along the track by the airline.

2) The tubing accidentally gets wrapped around an object while

a lift or transfer is being performed.

3) It is accidentally pulled out by the caregiver or the individual

being lifted.

The airline is connected to a gray rubber grommet located on the

underside of the lift. Refer to figure 3A.

Small metal ribbed pins located at the end of the airline hold the

airline to this rubber grommet in a specific manner. Therefore it is

important to make sure that the airline is connected properly.

Both the grey airline and the rubber grommet have a grey rib on

one of their sides. Line up the grey ribs together. Refer to figure

3B. When this is done then the metal ribbed pins attached to the

end of the airline can be re-inserted into the corresponding holes

in the rubber grommet on the underside of the lift. Be sure to in-

sert the pins into the grey rubber grommet sufficiently so that it is

secure. Refer to figure 3C.

Perform a brief test to ensure proper connectivity. Turn the lift

ON and OFF. Raise and lower the carry bar. For motorized trav-

erse lifts move the lift left and then right. If these functions work

correctly then the airline is properly connected.

If the lift does not work properly, check to ensure that the grey

ribs on the grey rubber grommet on the underside of the lift and

the airline tubing are lined up properly. If they are not lined up

properly, then remove the airline, line up the grey lines and then

re-insert it into the rubber grommet. Perform the test as noted in

the preceding paragraph. If there are still problems with the lift

then contact your local authorized dealer for service.

Caution: A sturdy ladder may be required in order to access the underside of the lift to re-attach

the rubber airline of the lift. Caution should be used when this is required.

Should you have any concerns or questions contact your local authorized Prism Medical dealer.

Figure 3A - Gray rubber grommet located on

underside of lift. Rubber airline is not connected.

Note grey rib on grommet.

Figure 3B - Gray rubber airline being inserted

into rubber grommet of lift. The black ribs on

both pieces are lined up. The metal ribbed pins

are on the airline.

Figure 3C - Gray rubber airline being inserted

into rubber grommet of lift. The black ribs on

both pieces are lined up. The metal ribbed pins

are on the airline.

Metal pins that get inserted into the holes

of the grommet of the lift.

Pieces connected together

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 8

Caution: Always, before using the C 800 lift system, the lift, track and sling (s) must

be visually checked for any unusual wear, or damage. Refer to the user manual with each

piece of supplied equipment to determine what should be checked. Should

anything look unusual contact your local Prism Medical dealer prior to use.

Failure to comply with this caution could result in serious injury to the operator, the

individual being lifted and/or damage to the lift.

Operation

Turning the lift ON and Automatic OFF

Figure 4B - Power traverse hand

control

Press any

button to

turn ON

Figure 4D - Lift ON indicator

Figure 4A - Manual traverse hand

control

Press any

button to

turn ON

Figure 4C - Motorized traverse “H”

system hand control

Press any

button to

turn ON

NEW LIFTS OR LIFTS THAT HAVE HAD BATTERIES CHANGED SHOULD BE CHARGED A MINIMUM OF 30

MINUTES BEFORE USE.

Refer to figures 4A, 4B and 4C to determine the hand control that is attached to the lift.

To operate the lift it must first be turned ON with the use of the hand control. This can be done by pressing any button

on the hand control. The indicator light located on the underside of the lift will turn GREEN and the display screen will

turn on. Refer to Figure 4D. If the lift fails to turn ON at anytime, ensure that the EMERGENCY STOP/ LOWERING

CORD has not been pulled and that the plastic clip at the end of the red cord has not come out.

To conserve battery power the lift will automatically shut off after approximately 5 seconds if no buttons are pressed after

initial “waking” or after approximately 2 minutes on non-use after last button push.

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 9

The lift is normally parked at the charg-

ing station end of the track when not in

use. It can be moved along the track to a

position directly above the person to be

lifted in one of two ways.

If you have a manually traversing lift

lower the carry bar to a comfortable

height such that it can be easily grabbed

by your hand. Move the lift along the

track by gently pushing the carry bar, or

individual in the sling. Never pull the lift

along the track.

If you have a motorized traversing lift, use the blue or yellow colored

directional hand control buttons to move the lift. The blue and yellow

buttons correspond to the blue and yellow directional arrows on the un-

derside of the lift. The direction therefore that is taken is determined by

the color of the button that is pressed. This works the same no matter

what side of the lift a person is standing on.

Refer to figures 6A, 6B and

6C.

Raising/lowering the carry bar

Operation

By pressing the DOWN arrow

button, or the UP arrow button,

the carry bar can be lowered/

raised to the correct height for

attaching the sling or position-

ing an individual. Refer to fig-

ure 5A and 5B

It is recommended that the care-

giver (operator) hold the carry

bar with one hand while this is

being done so that it will not

accidentally sway and/or come

into contact with an individual

or close object. These buttons

work the same on each model

of the lift.

Figure 5A - Power traverse hand con-

trol showing raising/lowering func-

tions

Moving the lift

Figure 6A - Motorized traverse hand

control showing colored buttons.

Figure 6C - Directional arrows on

underside of lift

Figure 6B - Lift showing horizontal move-

ment. Arrows are for motorized versions

Figure 5B - Lift showing raising/lowering of

carry bar.

Caution: Always use extreme care when moving the lift along the

track. Watch out for and avoid any obstructions that may cause injury

to the individual in the sling and/or damage to the lift.

DOWN

BLUE YELLOW

YELLOW

BLUE

C 800 - User Guide (753106) Rev: 9 JUNE 2016 Page: 10

Operation

Moving the “H” system traversing beam

If the installed track is an “H” system then this sec-

tion should be reviewed as it describes how to move

the traversing beam. If the installed track is not an

“H” system then this section can be skipped.

The “H” system involves the installation of two par-

allel support tracks and one traversing beam that is

mounted perpendicular to the two support tracks.

Refer to figure 7A. The benefit of this type of system

is that it provides greater movement and positioning

ability for an individual since the floor space cover-

age area is much larger than for a single piece of

track.

Besides the previously described UP/DOWN move-

ment of the carry bar, and LEFT/RIGHT movement

of the lift, the “H” system adds the ability to move

the traversing beam anywhere along the length of

the two parallel support tracks. Refer to figure 7A.

Figure 7A - Sample of “H” system room covering layout. Note that the

lift can be moved along the traversing beam, and that the traversing

beam itself can be moved along the two parallel support tracks.

The actual direction of travel when the hand control buttons are pressed

may be different than shown, since the track and lift orientation may be

different than installed. .

BAT HROOM

BEDROOM

BED

SUPPORT

TRACK

(BOTH SIDES)

BAT H

TR AV E RS ING

BE AM

LIFT

CHARGING

LOCATION

CHARGER

This can be accomplished in one of

two ways. If the installed “H” travers-

ing beam is manually traversing

then the beam is moved along the sup-

port tracks by manually moving the

beam, lift, and individual in one mo-

tion. This movement is the same as

that used for a manual traversing lift,

as previously described.

If the installed “H” system traversing

beam is motorized traversing then

the beam is moved along the support

tracks by pressing either the black or

white hand control button. Refer to

figure 7B. This will move the beam in the direction of travel as noted by the

black [▼] and white arrows [▲]located on the underside of the lift. Refer to fig-

ure 7C.

Figure 7C - Directional arrows on underside of power

traverse “H” system lift. Black and white arrows show

traversing beam direction of travel when the corre-

sponding colored button is pressed on the hand control.

Figure 7B - Power traverse “H”

system hand control showing

traversing beam movement

buttons. Button colors corre-

spond to the black and white

directional arrows located on the

underside of the lift.

Caution: Always use extreme care when moving the traversing beam. Watch out for

and avoid any obstructions that may cause injury to the individual in the sling, or

damage to the lift/track.

Tabla de contenidos

Otros manuales de Sistema de elevación de Prism Medical UK

Prism Medical UK

Prism Medical UK C1000 Manual de usuario

Prism Medical UK

Prism Medical UK C450 Manual de usuario

Manuales populares de Sistema de elevación de otras marcas

morse

morse 82H-124 Manual de usuario

Braun

Braun NL955 Series Manual de usuario

haacon

haacon 1889.10 Manual de usuario

Protekt

Protekt AT 252 Manual de usuario

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manual de usuario

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manual de usuario

Genie

Genie Z-60/34 Manual de usuario

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manual de usuario

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manual de usuario

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manual de programación

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manual de programación

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manual de programación

BERG

BERG BeNomic EasyLeaf Manual de usuario

Powermate

Powermate LiftGate LG-3 Manual de usuario

Snorkel

Snorkel TM12 Series Manual de usuario

Terberg

Terberg OMNIDEKA Manual de usuario

Harmar Mobility

Harmar Mobility AL625 Instrucciones de funcionamiento

Rotary

Rotary SPO16 Manual de usuario