Prio Expert MO Series Manual de usuario

Prio®Expert

User’s Guide

MO530

MO520

MO510

MO___

Reverse Osmosis

Filtration System

(Storage Tank,

Main Filtration Unit Set)

Before operating this appliance, please read the instructions carefully. You

may want to save this guide for your future reference. Failure to follow the

instructions or meet the operating requirements may lead to the product’s

failure, malfunction, property damage or personal injury.

Safety Warning

■Do not place the storage tank near the sources of heat, radiators, etc.

■Keep the appliance out of reach of pets or other animals.

■Do not use the appliance if operating requirements such as water tempera-

ture/water pressure/electrical supply, etc. are not met. There may be other

local regulations to comply with.

■Do not use the appliance with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or aer the system.

■Do not use the waste water produced by the appliance for drinking or cooking.

■Never store or operate the appliance in direct sunlight.

■This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction con-

cerning use of the appliance by a person responsible for their safety.

■Children should be supervised to ensure that they do not play with the ap-

pliance.

■At the end of its life, the appliance should be disposed o in an appropriate

manner.

Disposal

Old appliances still contain many recyclable materials. Therefore, please take

used unit to your retailer or recycling center so that it can be recycled.

Description

Congratulations on your purchase of the Prio® Expert R.O. ltration system! With proper

installation and maintenance, it will provide you with high quality drinking water for many

years.

This R.O. system removes odor and most harmful substances such as heavy metal ions and

total dissolved solids from tap water making it tasty, fresh and vital.

Please familiarize yourself with the general concept behind the product and main modes of

operation.

Key Features:

■Clean and safe drinking water right in your home. No need to transport and dispose of

bottled water any more.

■Factory-preinstalled lters and membrane for faster and easier setup.

■Filters and membrane quick-change housings for easy regular maintenance.

■Compact and beautiful design.

■Quick ttings for easy tube connections and change of lters.

How It Works:

This Prio® Expert reverse osmosis system is a multi-stage automatic ltration machine.

Reverse Оsmosis (R.O.) is a water purication technology that uses a semipermeable mem-

brane to remove ions, molecules and larger particles from drinking water. R.O. can remove

many types of dissolved and suspended species from water, including bacteria, and is used in

both industrial processes and the production of potable water.

Water supply is done through the inlet valve, ltered water is rst stored in the water tank and

then delivered through the faucet, and waste water is drained through the drain saddle. Detailed

connection scheme is shown on the following charts.

Inlet valve:

An adapter ball valve is included to be installed into the cold water supply line to feed water

to the ltration unit inlet.

Faucet:

Designer faucet for ltered water is included and usually mounted on the sink deck or counter-

top for dispensing the clean, ltered water from the ltered water storage tank.

Water Storage Tank:

Air pressurized storage tank is used for ltered water storage.

Drain saddle:

Fits a standard 1.5” diameter drain pipe to drain the waste water from the drain outlet of the

ltration unit.

Pre-Filters:

The main R.O. unit has two pre-lters: sediment pre-lter on the rst stage and activated

carbon pre-lter on the second stage. They provide initial ltration of the water and protect

the following thin lm composite R.O. membrane from dirt and aggressive chemicals such as

chlorine oen found in tap water.

R.O. Membrane:

The third and main stage of the ltration is R.O. membrane. It is “semi-permeable”, which

means that it allows water to pass through but prevents dissolved particles from passing

through. It splits the feed water into two streams: clean water goes to the post-lter and then

onto the tank and faucet. Waste water with rejected particles goes down the drain.

Post-Filter:

Last stage of ltration is an activated carbon post-lter and/or remineralization for ne con-

ditioning and keeping the extra freshness of your water.

Specication

Operating Requirements:

■Minimum supply water pressure1: 30 psi (0.2 MPa)

■Maximum supply water pressure: 80 psi (0.55 MPa)

■Minimum water temperature: 41 oF (5 oC)

■Optimal water temperature: 59–77 oF (15–25 oC)

■Maximum water temperature: 95 oF (35 oC) / up to 105 oF (40.5 oC) short-term

■Ambient air temperature: 41–105 oF (5–40.5 oC)

■Water source: tap water supply, chlorinated or non-chlorinated, bacteriologically safe

■Supply water pH range: 4.0-11.0

■Supply water turbidity: < 1 NTU

■Supply water components: Hardness (CaCO3) <180 mg/L (<10.5 gpg), Iron <0.1 mg/L,

Manganese <0.05 mg/L, Hydrogen Sulde 0.00 mg/L

■Maximum supply water TDS: 1000 ppm

■Indoor use only.

■Tubing: ¼”

1If below 40 psi, a booster pump may be required. X845 Pump Bot is then recommended.

Performance:

Performance of the appliance such as ltered water delivery rate, rejection rate, etc. is highly

dependent on local conditions (inlet water pressure, temperature, TDS and degree of contam-

ination, tank air pressure, etc.) and R.O. system use pattern. Actual performance may vary.

■Filtered water production rating: 75 gpd (270 lpd) maximum

■Filtered water delivery rate (from the tank), typical: 0.27–0.74 gpm (1–2.8 l/min)

■Membrane rejection rate1, typical: 90%

■Recovery rate (system eciency2), typical: 15%

■Drain water ow restrictor: 300 cc (ml/min) nominal, up to 360 cc in working mode.

■Tank Storage Capacity (Total Volume): up to 2.5G (4.0G)3

■Tank full rell time4, typical: 70-120 min

Weight and Size:

R.O. ltration unit:

Size (WDH), body only, excluding protrusions: 13.46 x 3.35 x 14.80” (342 x 85 x 376 mm)

Weight, without water and tubing: 8.8 lbs (4.0 kg)

Storage tank:

Tank model No. X842G X852G

Storage Capacity (Total Volume) up to 2.0G (3.2G) up to 2.5G (4.0G)

Size (WxDxH), body only,

excluding protrusions

9.8 x 9.8 x 13.6”

(250 x 250 x 347 mm)

10.55 x 10.55 x 14.90”

(268 x 268 x 378 mm)

Weight, without water and tubing 4.7 lbs (2.1 kg) 6.0 lbs (2.7 kg)

Warranty:

1 year worldwide limited warranty (+ local regulations if applicable)

Package Contents:

(1) The R.O. ltration unit with installed l-

ters (K871, K870, K866, K875 for MO510;

K871, K870, K866, K880 for MO520,

MO530)

(1) Storage tank (X842G model for MO510,

MO520; X852G model for MO530)

(1) Universal worldwide adapter ball valve

(G1/2” - G3/8” - UNEF 9/16”-24 - JG 1/4”)

(1) Teon tape roll

(1) Faucet

(1) Drain saddle

(1) Wrench

(1) ¼” tank valve

(26  / 8 m) Water tubing ¼”

(1) ¼” x ¼” union check valve

(2) ¼” x ¼” x ¼” union tee tting

User’s guide

1 For all dissolved solids combined as measured by TDS or conductivity meter.

2 Eciency rating means the percentage of the inuent water to the system that is available to the user as

reverse osmosis treated water under operating conditions that approximate typical daily usage.

3 Depending on current SKU scope of supply.

4 Depending on supply water pressure.

Installation

Notes:

1. Shut o the cold water supply under the sink or the location where the system will be

installed. If the existing valve is inoperable, the water supply to the house must be shut

o. Then, relieve the water pressure by opening the cold water tap. Do not connect the

system to hot water source.

2. Depending on your plumbing system and sink/countertop type you may need to use tools

like variable speed drill, drill bits, screw driver, wrench, etc. You may want to ask a profes-

sional service provider such as certied plumber to install the inlet valve adapter, faucet,

and drain saddle to assure a trouble-free setup.

3. During installation you will need to cut the supplied ¼” tubing into segments as needed.

Use your utility knife for that or similar tool. See the following charts to determine the

connection scheme and length of hoses necessary. You may need to purchase extra tubing

for far-reaching or other corner case installations.

4. With initial operation, check for leaks. If a leak is observed, verify that the tubing is

pushed into the quick tting far enough to seal the tubing against the O-ring and that the

tubing was cut at 90°.

drain

saddle

check valve

tank

waste water outlet

permeate outlet to the tank

to drain or waste water

collection container

ﬁltered

water

faucet

ﬁltration unit inlet

inlet valve

(optional)

General connection scheme:

IMPORTANT: Cut Tubing At 90° to Ensure a

Watertight Seal:

Units Placement Guide:

R.O. ltration unit

Remember this unit must be serviced at regular intervals. Therefore it should be reasonably

accessible (for changing lters or membrane, etc.).

To Connect the Tubing to a Fitting:

1. Remove the lock if present (not present in self-locking ttings).

2. Push. Insert the tube rmly until full stop.

3. Pull the collet back slightly.

4. Replace the lock (if present).

To Disconnect the Tubing:

1. Remove the lock if present (not present in self-locking ttings).

2. Push the collet and hold.

3. Pull the tubing out.

4. Replace the lock (if present).

No skewed cut!

Installation Steps:

1. Install adapter ball valve (included) to the

cold water supply.

Use some Teon or plumbers sealing tape to

prevent leaks. Use three included threaded

adapters to make dierent connection con-

gurations (see chart for details).

2. Create ½” hole for the ltered water faucet and install it.

Tip: If you have a soap dispenser or a water

sprayer in an existing hole you may remove it

and use its hole for the ltered water

faucet.

3. Install drain saddle.

The square foam gasket with a circle cut out must be applied to the inside of the drain sad-

dle. Remove sticky tape backing and stick to the drain saddle as shown.

1. Faucet

2. Chrome washer

3. Black rubber washer

4. Countertop or

sink deck

5. Black washer

6. Lock washer

7. Lock nut

8. Insert

9. Sleeve

10. Compression nut

11. Tubing

UNEF 9/16”-24

G3/8” G1/2”

G1/2”

Adapter Adapter

UNEF 9/16”-24

G3/8”

G1/2”

Adapter

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de filtración de agua de Prio

Prio

Prio Expert M400 Manual de usuario

Prio

Prio AVANTGARDE SDX Series Manual de usuario

Prio

Prio Expert MOD600 Manual de usuario

Prio

Prio Bravo Manual de usuario

Manuales populares de Sistema de filtración de agua de otras marcas

Wisy

Wisy LineAir 100 Manual de usuario

Schaffner

Schaffner Ecosine FN3446 Series Manual de funcionamiento

Pentair

Pentair FLECK 4600 SXT Guía del usuario

H2O International

H2O International H20-500 Manual de usuario

Renkforce

Renkforce 2306241 Manual de usuario

Neo-Pure

Neo-Pure TL3-A502 Manual de usuario

FLTR

FLTR OBF Manual de usuario

STA-RITE

STA-RITE VERTICAL GRID DE FILTERS S7D75 Manual de usuario

Applied Membranes

Applied Membranes W-G844EM Manual de usuario

BEGA

BEGA 116 Manual de usuario

WATA

WATA Standard Manual de usuario

Price

Price FFU series Manual

Gaggenau

Gaggenau BRITA INTENZA 467873 Manual de usuario

Brita

Brita SAFF-100 Manual de usuario

HEISSNER

HEISSNER FPU24000-00 Manual de usuario

BGS technic

BGS technic 1518 Manual de usuario

Reverse Osmosis

Reverse Osmosis RF Series Manual de usuario

ubbink

ubbink Filtramax Series Manual de usuario