Primex OneVue Sync Series Manual de usuario
OneVue™ Sync Bluetooth Personal Series
LCD Clock
Install Guide
Product models B2004Z100
Publication date February 19, 2020
Copyright ©2020 Primex. All rights reserved.
Printed in the USA.
Information in this document is subject to change without notice. The software described in this document is furnished under a
license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those
agreements. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical or otherwise, for any purpose, without the prior written permission of Primex.
OneVue is a trademark of Primex. All other trademarks are the property of their respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by
Primex, Inc. is under license.
Primex is the leading provider of solutions to automate and maintain facility compliance, increase efciencies, enhance safety and
reduce risk for enterprise organizations in the healthcare, education, manufacturing and government vertical markets. Primex delivers
solutions that utilize a facility’s existing network infrastructure to automate, monitor, document and report essential activities
performed by facility staff. Our solutions include synchronized time, automated critical notications and bell scheduling, and
environmental and event monitoring.
Corporate Headquarters
965 Wells Street
Lake Geneva, WI 53147
Phone: 1-262-729-4853
Table of Contents
Install and operation overview: Sync Bluetooth Personal Series LCD Clock .................................................. 4
About Sync Bluetooth devices ................................................................................................... 4
About Add a Clock mode .......................................................................................................... 4
Install Bluetooth Personal LCD Clock: Tabletop or wall mount .................................................................. 6
Location guidelines ................................................................................................................. 6
Battery use recommendations ................................................................................................... 6
Tabletop mount ...................................................................................................................... 6
Wall mount ............................................................................................................................ 7
Remove Personal LCD Clock from clock-lock mount .............................................................................. 8
Specications: Sync Bluetooth Personal Series Clock ............................................................................. 9
Technical Support ......................................................................................................................... 10
Support through Primex Certied Sales and Service Partners ......................................................... 10
Primex Technical Support ...................................................................................................... 10
IMPORTANT SAFETY INSTRUCTIONS ............................................................................................... 11
REGULATORY APPROVALS ............................................................................................................. 12
RADIO STANDARDS SPECIFICATION (RSS) ........................................................................................ 14
EUROPEAN UNION DECLARATION OF CONFORMITY AND RESTRICTIONS ............................................... 15
TWO YEAR LIMITED WARRANTY ..................................................................................................... 16
Page 3
Install and operation overview: Sync Bluetooth Personal Series LCD Clock
About Sync Bluetooth devices
Sync Bluetooth clocks and repeaters are designed to provide ease of installation, requiring no end user conguration,
simply take-out-of the box and install. The only operation dependency is its connection to an available Sync Bluetooth
mesh network.
• Sync Bluetooth devices are equipped with a Bluetooth Low Energy (BLE) Wireless Technology radio component, that
allows it to establish a wireless connection to a Sync Bluetooth mesh network.
• Each device is identied by a unique Device ID, allowing it to receive its unique settings managed in OneVue, and also
authenticate and connect to the mesh network.
• A Bridge is the only system device that connects to your facility’s Ethernet or Wi-Fi network. Upon its network
connection, it connects to a NTP Server to receive UTC time and checks-in to OneVue to send Sync Bluetooth device
statuses and download setting updates.
About Add a Clock mode
Upon rst-power up at its installation location, a clock and repeater enters Add a Clock mode as described below.
1. Once powered on at its installation location, the device continuously searches for an available Sync Bluetooth
mesh network.
It may take up to 15 minutes for a device to authenticate and connect to an available mesh network. We
recommend to continue installing additional devices, while other devices establish their connection to the mesh
network.
2. Once a device has authenticated with the mesh network, it establishes a communication path either to another
Sync Bluetooth device or directly to a Bridge available within the mesh network.
3. Once connected, the device receives the New Clock Time Zone and sets its time. For an analog clock, its hands
perform one full revolution past 12:00 and then sets its time.
• During its rst connection to the mesh network, its unique Device ID is added to the mesh network.
• If a Bridge is in 8-hour deployment mode, within 30 minutes of receiving a new Device ID, the Bridge connects to
your facility's network and sends the new Device ID to OneVue. The new device is added to your OneVue
account.
• If a Bridge is not in 8-hour deployment mode, the new device is added to your OneVue account within 24 hours to
7 days.
4. When the Bridge connects to OneVue, the new device default settings are downloaded to the Bridge.
5. Upon its next connection to the mesh network, the Bridge automatically sends updated device settings received for
each device based on their Device ID.
In summary, from the time a clock or repeater device is rst powered on at its install Location and connects to the
mesh network, it receives and sets its time within 15 minutes. If a Bridge is in 8-hour deployment mode, a new device is
Page 4
added to your OneVue account within 30 minutes, and when not in 8-hour deployment mode it may take up to 24 hours
to 7 days.
Battery-operated clock only: When a clock cannot establish a connection to a mesh network to receive time, its
estimated battery life is reduced to 90 days.
Page 5
Install Bluetooth Personal LCD Clock: Tabletop or wall mount
Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks.
Location guidelines
When identifying the install location of a Bluetooth device, the following guidelines should be followed to ensure a
device as adequate Bluetooth wireless signal strength.
• 100 ft. (30 m) when in clear-line-of sight to another Sync Bluetooth device
• 50 ft. (15.2 m) when there is 1 internal wall between Sync Bluetooth devices
• 30 ft. (9.1 m) when there are 2 internal walls between Sync Bluetooth devices
You can also measure the Bluetooth signal strength at an installation location to determine if the location has adequate
Bluetooth signal strength.
Battery use recommendations
Battery life expectancy is based on common operating conditions and may vary due to installed site conditions and
settings. Sync Bluetooth battery-operated clocks and repeaters have up to a ve year battery life.
• Use only new high-quality name brand alkaline batteries
• Use batteries with expiration date ve or more years beyond the installation date
• Use batteries with the same type and date code
• Do not use heavy duty and zinc carbon batteries as they will not last as long as high-quality name brand alkaline
batteries
• Do not use rechargeable NiCad batteries, as their output voltage is too low to assure proper operation
• Do not use standard lithium batteries
• Battery level is monitored by OneVue. Batteries should be replaced promptly upon reaching low battery status to
maintain performance and reduce the risk of battery leakage due to excess discharge.
Tabletop mount
The Personal Series LCD Clock has an easel stand located on the back of the clock.
Page 6
1. To place the clock on a table or desk, simply unfold both sides of the easel stand.
2. Verify power is applied and displaying time.
Wall mount
Depending on your security needs, you can choose among the two mounting options.
Clock-lock wall mount
The clock-lock feature is a specially designed hanger at the top center of the clock. The clock-lock is designed to
prevent accidents if the clock is bumped and it may reduce theft by requiring a particular combination of moves to
remove the clock.
1. Use the screw and anchor provided with the clock for installation. If you choose not to use the provided screw and
anchor, you can substitute a #4 screw. The screw must protrude from the wall 1 in. (0.25 cm).
2. Verify clock is level and mount is secure.
Standard wall mount
A standard mount avoids the clock-lock feature altogether. The clock can be removed like a standard clock.
1. Use a nishing nail with no head angled at 45 degrees into the wall.
2. Verify clock is level and mount is secure.
Page 7
Remove Personal LCD Clock from clock-lock mount
To remove a clock from a clock-lock mount, follow the steps illustrated below.
Page 8
Specications: Sync Bluetooth Personal Series Clock
Physical Dimensions: 7.5 in. H (19.1 cm) x 11.5 in. W (29.2 cm) x 1.75 in. D (4.5 cm)
Calendar display dimension: 3.81 in. H (9.7 cm) x 5.5 in W (14 cm)
Time display screen dimension: 2.25 in. H (5.7 cm) x 5.5 in W (14 cm)
Color: Silver
Weight: 1.25 lbs. (.57 kg)
Wall mount with patented anti-theft clock lock or easel stand for desk or tabletop use
Operation Clock connects to a Sync Bluetooth mesh network to send status, synchronize received
UTC time to its Time Zone offset and DST rules, and receive OneVue setting updates.
Display settings and Time Zone managed from OneVue.
Time mode setting: set to 12 hour or 24 hour
Date formats: North America (MM/DD/YY), Europe (DD/MM/YY)
Day of the week: on or off
Automatically adjusts for Daylight Saving Time (DST)
Backlight switch: Low, Off, or High
Power Battery powered.
Requires four “C” cell alkaline batteries (not included).
Approximately 4 years of battery life under normal conditions (backlight runs eight hours
each day on low light setting)
Bluetooth® Wireless Communication Protocol Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1 Bluetooth
Range: up to 100 feet (30 meters)
Environment Indoor use only
Operating temperature range: 32° - 120° F (0° - 49° C)
Page 9
Technical Support
You may require Technical Support when you have questions about product features, system conguration or
troubleshooting. Support services are delivered in accordance with your organization's support agreement, end user
licenses agreements, and warranties, either with a Primex Certied Sales and Service Partner or directly with Primex.
Support through Primex Certied Sales and Service Partners
Ensuring our customers experience excellent service is of utmost importance to Primex. Our network of Certied Sales
and Service Partners offer technical support services for Primex products.
If you have purchased Primex products or have a service agreement with a Primex Partner, they are your primary
contact for all Technical Support inquires.
Primex Technical Support
Make sure you have satised the system requirements that are listed in your product documentation. Also, you should
be at the computer or device on which the problem occurred, in case it's necessary to replicate the problem.
When you contact Primex Technical Support, please have the following information available:
• Customer ID/Account Name
• Problem description/error messages
• Device hardware information
• Troubleshooting performed before contacting Primex
• Recent network changes
Primex Technical Support
Monday through Friday from 8:00 AM to 5:00 PM CT
Phone: 1-262-729-4860
Email: [email protected]
Page 10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Reloj de Primex
Primex
Primex Smart-Sync Manual de usuario
Primex
Primex OneVue Smart-Comm Manual de usuario
Primex
Primex B11980 Manual de usuario
Primex
Primex XR Electric Analog Clock Manual de usuario
Primex
Primex OneVue Classic Series Manual de usuario
Primex
Primex Smart-Sync Personal Series Manual de usuario
Primex
Primex XR PERSONAL SERIES Manual de usuario
Primex
Primex OneVue Levo Series Manual de usuario
Primex
Primex OneVue Sync Levo Series Manual de usuario
Primex
Primex XR Levo Series Manual de usuario
Primex
Primex XR series Manual de usuario
Primex
Primex XR Classic Series Manual de usuario
Primex
Primex XR PERSONAL SERIES Manual de operación
Primex
Primex XR Classic Series Manual de usuario
Primex
Primex OneVue Wi-Fi Analog Clock Series Manual de usuario
Primex
Primex OneVue Levo Series Manual de usuario
Primex
Primex XR PERSONAL SERIES Manual de usuario
Primex
Primex OneVue Sync C1005 Manual de usuario
Manuales populares de Reloj de otras marcas
Silicon Laboratories
Silicon Laboratories SI5324 Manual de usuario
Heathkit
Heathkit GC-1005 Manual de usuario
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Manual de usuario
Andrew O'Malley
Andrew O'Malley DOTKLOK Manual de usuario
ALGE-Timing
ALGE-Timing ASC3 Manual de usuario
Bodet
Bodet Profil 960 Manual de usuario
