Primera Business Card Adapter Kit Guía de inicio rápido
This sheet describes the installation and use of the CD-R Business Card
Adapter Kit for the Disc Publisher Pro and the AutoPrinter Pro (referred
to hereafter as the "Publisher").
NOTE: You will need to download and install the updated printer
driver if you have a version lower than 1.03.
•To find your driver
version, go to Start -
Control Panel - Printers
and Faxes - Right Click
on Disc Publisher Pro -
Choose Printing
Preferences - Right Click
on Disc Publisher Pro
Settings - Choose About... The version below the line should read
1.03 or higher. If it does not, perform the upgrade.
•To install the driver, first download it from our web site:
http://www.primera.com/primera_printer_drivers.html. Refer to
the installation instructions included with the driver file.
SECTION I: INSTALLATION
1. Make sure that in this box you have the following items:
•CD Business Card/ Mini CD 80mm Input Bin
•"Hockey Rink" Card Input Bin
•Two Ouput Rings
•Three Printer Tray Templates
•Sample Discs
2. Remove original 120mm Input Bin and place the appropriate
Card/Mini Disc Input Bin on the right side of the Publisher with
the opening in the bin to the rear. If the opening in the bin is not
toward the rear, the Robotic Disc Transporter will not be able to
pick from the bin.
Figure 1: Input Bins
3. Place Output Rings in the center of the Output Bin on the left
side of the Publisher as shown in Figure 3.
4. With the Front Cover of the Publisher closed, press the Cartridge
Button. The Printer Tray will open. Open the Front Cover and
install the appropriate Printer Tray Template in the Printer Tray as
shown in Figure 3. The front of the Template has molded tabs that
fit into locating slots found toward the front of the Printer Tray.
When properly installed, the metal clamp moves forward to hold
the card in place as the Printer Tray retracts into the printer.
Figure 2: Printer Tray Templates
Figure 3: Adapter Kit
“Hockey Rink”
Card Input Bin
CD Business
Card/Mini CD
Input Bin
Rear Opening for Arm
“Hockey Rink” Mini Disc
Front Cover
Output Rings
Printer Tray
Template
Cartridge
Button
Input Bin
Business Card
SECTION II: CREATING DISCS
1. 80mm Discs can be produced in the same manner as standard
120mm discs. When printing business card or hockey rink card
types on the PC, it is necessary to record and print the cards in
two separate steps. To record, first load the input bin with blank
CD-R Business Cards. Next, create your recording job as described
in the User's Manual making sure to disable the Print option in
Primo DVD's Recording Job Window. On the Mac, you have the
option in Discribe under the Robot Write pane to print before
recording, which will allow you to make the cards in one step.
2. Once your Business Cards have finished recording, reload them in
the input bin for printing. When printing one of the three sizes
supported by this adapter kit, you will need to select the proper
card size in the driver as shown in Figure 4. Simply print the
number of desired copies from SureThing CD Labeler. The
Publisher will automatically load and unload the discs.
Figure 4: Disc Type
Congratulations! You are now ready to create your own CD Business
Cards and Mini CDs.
Business Card
Adapter Kit
For Use with Disc Publisher Pro
Operator Instructions
010305-510726
©2003 All rights reserved
Page Size Settings for Mac
Page Size Settings for PC
Print First Option for Mac
Otros manuales para Business Card Adapter Kit
1
Otros manuales de Adaptador de Primera
