Pretron Technologies VT-666 Manual de usuario
View Tech Desktop Visualizer
User Manual
VT-666
1
PRECAUTIONS
Please follow these precautions:
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electrical shock, do not open the cabinet. Refer to qualified
personnel for service only.
Do not use the unit continuously for more than 24 hours with camera auto
focus on. It may cause damage to the camera lens.
Be careful not to spill water or other liquids onto the unit, or allow combustible
or metallic objects to get inside the cabinet.
Unplug the visualizer from the wall outlet when it is not in use for
an extended period of time.
Clean cabinet with a soft cloth lightly moistened with a mild detergent.
Clean lens carefully with an air spray or soft dry cloth to avoid scratching.
When lamps flash or become dark, they should be replaced with new ones.
Avoid interchanging arm lights and back light frequently.
Remove the camera lens cap before power the unit on.
2
CONTENTS:
PARTS IDENTIFICATION.................................................................................3
CONTROL PANEL ............................................................................................3
BUTTON INSTRUCTION..................................................................................4
REMOTE CONTROL........................................................................................5
CONNECTIONS................................................................................................6
BASIC PREPARATIONS...................................................................................7
PAL/NTSC VIDEO OUTPUTS ........................................................................10
WORKING ON THE STAGE...........................................................................10
WORKING OUTSIDE THE STAGE ................................................................10
LIGHT.............................................................................................................. 11
ADJUSTING IMAGE SIZE.............................................................................. 11
WORKING WITH NEGATIVES.......................................................................12
FOCUSING .....................................................................................................12
FREEZING IMAGE .........................................................................................12
BRIGHTNESS ADJUSTMENT........................................................................12
WHITE BALANCE ADJUSTMENT..................................................................12
AUTO ADJUSTMENT .....................................................................................13
TEXT/IMAGE MODE.......................................................................................13
COLOR AND B&W MODE SWITCH...............................................................13
COMPUTER / VIDEO INPUTS.......................................................................13
PROJECTOR ON/STANDBY..........................................................................13
PROJECTOR INPUTS SELECTION..............................................................13
IMAGE ROTATION..........................................................................................14
IMAGE REVERSION ......................................................................................14
INFRARED REMOTE CONTROL...................................................................14
4 X 4 MULTIPLE SCREEN DISPLAY.............................................................14
INSTALLING VISUALIZER SOFTWARE........................................................15
USB PORT......................................................................................................15
USB IMAGE CAPTURE..................................................................................16
CONTROLLING VISUALIZER BY COMPUTER ............................................17
CONTROLLING PROJECTOR BY VISUALIZER...........................................17
FOLDING THE UNIT.......................................................................................21
SPECIFICATIONS...........................................................................................22
3
PARTS IDENTIFICATION
Zoom in/out knob Camera
Stage
Camera stand
Arm lights
Connectors
Back light
Remote control slot Connectors
Operation panel
CONTROL PANEL
SAVE (Save captured images)
RECALL (Multiple Screen Display)
SPLIT (Image Split function)
TITLE (Freeze the top 1/8 of the screen)
PROJECTOR POWER (Control the projector On/Standby)
PROJECTOR SOURCE (Projector input signal selection)
4
FREEZE (Freeze the image)
ROTATE (Rotate the image)
TEXT (Switch between image/text mode)
LAMP (Control the arm lights and back light)
POWER (Control the visualizer On/Off)
VISUALIZER (Camera signal output selection)
COMPUTER/VIDEO (Computer/ Video input signal selection)
AUTO (To auto white balance and auto focus)
/(Focus near or far)
/(Increase or decrease the brightness)
BUTTON INSTRUCTION
Note: 1.When the indicator is mixed color(red and blue),camera signal output
from PROJECTOR port.
2.When the indicator is mixed color(red and green),camera signal
output from VIDEO or S-VIDEO port.
5
REMOTE CONTROL
POWER (Control the visualizer On/Off)
ROTATE (Rotate the image)
FREEZE (Freeze the image)
LAMP (Control the arm lights and back light)
SAVE (Save captured images)
NEG (Display film negatives)
MIRROR (V-Reverse the image)
XGA (Switch among XGA, SXGA, WXGA and 720P)
RECALL (Multiple screen display)
TEXT/DELETE (Switch between image/text mode, delete image under recall
mode)
B&W (Switch between Color mode and Black & White mode)
SPLIT (Image Split function)
PROJECTOR POWER (Control the projector On/Standby)
PROJECTOR SWITCH (Projector input signal selection)
EXIT (Exit selected function)
6
TITLE (Freeze the top 1/8 of the screen)
TELE/
W
IDE (Increase and decrease magnification)
FAR/NEAR (Focus near or far)
AUTO (To auto white balance and auto focus)
DUAL DISPLAY(*No function)
PC/VIDEO (Computer/Video input signal selection)
CAM (Visualizer output selection)
VOLUME+/- (Increase or decrease the volume)
BRIGHT+/- (Increase or decrease the brightness)
SCROLL / (*No function)
SCREEN / (*No function)
CONNECTIONS
Rear Panel
USBMIC RGB IN AUDIO IN RS232
PROJECTOR
Side Panel
INOUT
AUDIO IN
COMPUTERPROJECTOR
IN
VIDEO
AUDIO
VIDEO
AUDIO
OUTOUT
S-VIDEO 12V- IN
12 3 45678910
11 12 13 14 15 16
#1 AUDIO OUT #2 VIDEO OUT #3 S-VIDEO OUT
#4 VIDEO AUDIO IN #5 VIDEO IN #6 PROJECTOR Connector
#7 COMPUTER OUT #8 COMPUTER AUDIO IN
#9 COMPUTER IN #10 POWER IN
#11 PROJECTOR RS232 Connector #12 MIC IN
#13 USB Connector #14 RGB IN
#15 RGB AUDIO IN #16 COMPUTER RS-232 Connector
7
BASIC PREPARATIONS
1. Place one hand firmly on the base of the visualizer, while carefully
lifting up the camera stand using the other hand.
2. Open the arm lights and rotate the camera head until they are properly
positioned.
Arm lights
3. Making connections:
Before making any connections, turn off all the power. Please ensure that
the visualizer along with all other equipments to be connected are turned
off.
Step 1: Connect power source.
First connect the power cord to the 12V IN connector.
Tabla de contenidos
