Your n-ABLER has a variety of additional features to make it
easier for you to use:
A Orientation Facility Your n-ABLER can be used in any of the
positions shown in Figure 3. This, together with the option to mount
your n-ABLER on a bracket, allows it to be mounted in many different
ways to make using it easier.
The default setting is with the computer lead furthest from you. If you
prefer this you do not need to do anything. If you prefer to use it in a
different position follow the steps in the Learn Mode section.
B Buzzer The buzzer gives an audible indication as you switch on/off
some of the features. The default setting for the buzzer is ‘on’ and you
don’t need to do anything if this is your preference.
If, however, you like to work in a quiet environment and wish to have
the buzzer ‘off’ follow the steps in the Learn Mode section.
C Left/Right Button Swap If you are left-handed, or wish to use your
n-ABLER ‘upside down’ you may wish to swap the Left and Right
buttons around. If so follow the steps in the Learn Mode section.
D External Buttons Two sockets are provided at the rear of the unit to
allow external Buttons to be connected. The socket adjacent to the Red
Button performs the same function as the Red Button, and the socket
adjacent to the Yellow Button performs the same function as the Yellow
Button. Suitable Buttons are widely available from retailers.
Note that the external Buttons work in addition to the internal ones.
Warning: These jack sockets are not for external power supplies.
Never connect an external power supply to the unit, otherwise
permanent damage may occur.
Additional Features
Maintenance
The ‘n-ABLER’ has no user serviceable parts. If repair is necessary
the unit should be returned to Pretorian Technologies Ltd or an
authorized distributor.
Warranty
The ‘n-ABLER’ is warranted for 24 months from the date of
purchase against defects in manufacture, or component failure. The
unit is designed for use in domestic, educational, commercial and
light industrial applications. Use outside these areas will invalidate
the warranty.
Unauthorised repair or modification, mechanical abuse, immersion
in any liquid and connection to any equipment other than a host
computer will invalidate the warranty.
Unit 37 Corringham Road Industrial Estate Gainsborough
Lincolnshire DN21 1QB United Kingdom
Tel +44 (0) 1427 678990 Fax +44 (0) 1427 678992
www.pretorianuk.com
n-ABLER (trackball) 2010 leaflet:n-ABLER leaflet 14/4/10 16:57 Page 3
