Premio CALYPSO II Manual de usuario
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2 MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTION
2-1
The CALYPSO II Micro LPX mainboard is a high-performance all-in-one
computer mainboard based on Intel®815 chipset. The CALYPSO II is
designed for the Intel®CeleronTM processor/Pentium III(FC-PGA) processor
for inexpensive business/personal desktop markets.
The Intel®815 chipset integrates a Display Cache SDRAM controller that
supports a 32-bit 133MHz SDRAM array for enhanced integrated 3D
graphics performanced. It is a highly-flexible chipset which is designed to
extend the basic graphics/multimedia PC platform up to the mainstream
performance desktop platform.
The Intel®815 chipset implements the host address, control, and data bus
interfaces within a single device, it takes advantage of the pipelined address-
ing capability of the processor to improve the overall system performance.
In addition, the chipset also integrates a system memory controller that
supports a 64-bit 100/133 MHz SDRAM array.
The Intel®82801BA (ICH2) chipset is a highly integrated multifunctional I/O
Controller Hub that provides the interface to the PCI Bus and integrates
many of the functions needed in today’s PC platforms. It communicates with
the host controller over a dedicated hub interface and provides added
flexibility in designing cost-effective system solutions.
Chapter 2
MAINBOARD INTRODUCTION
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2 MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTION
2-2
2.1 Mainboard Features
CPU
zSupport Socket370 for Intel®CeleronTM/Pentium III(FC-PGA) processor.
zSupport 500MHz, 550MHz, 600MHz, 633MHz, 667MHz and up to 866MHz
Chipset
zIntel®Solano chipset. (544 BGA)
- Support PC100/133 memory bus
- Support 66/100/133MHz FSB
zIntel®ICH2 chipset. (241 BGA)
- AC’97 Controller Integrated
- 2 full IDE channels, up to ATA100
- Low pin count interface for SIO
- Integrated 10/100Mbps Ethernet Controller
- 2 Host USB controller, up to 4 USB ports
MainMemory
zSupport two 168-pin DIMM sockets.
zSupport a 32 to 512MB using 16/64/128/256Mbit technology.
Slots
zOne 32-bit PCI Bus riser slot. (Extend to two PCI slots)
zSupports 3.3v/5v PCI bus Interface.
On-BoardIDE
zAn IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA 66/100 operation modes.
zCan connect up to four IDE devices.
Video
zSolano Chip Integrated
z2D/3D Graphics
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2 MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTION
2-3
Audio
zICH2 Chip Integrated
zAC’97 2.1 Compliant
Network
zIntel 82562 EM Platform LAN connect for 10Base-T and 100Base-TX
- support basic AOL function (Alert on LAN)
zICH2 chip integrated the 10/100Mbps Ethernet Controller
TV-Out(Optional)
zChrontel CH7007
- support S-Out/AV-Out
1394 Controller (Optional)
z1394 PHY Controller
- TI TSB41LV02 PHY Digital-to-Analog Transceiver
- Support up to two 1394/1394A V2.0 compatible data channels
z1394 Link Layer Controller
- TI TSB12LV26 1394 Link Layer Host Controller
- IEEE 1394, 1394 OHCI V1.0 & 1394A V2.0 compatible
- Supports 100/200/400 Mbps High Throughput
- 3.3V & 5V Operation for PCI-to 1394 Interface
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2 MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTION
2-4
On-Board Peripherals
zOn-Board Peripherals include:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 1 serial port header (COM1) connected to rear COM port
- 1 parallel port supports SPP/EPP/ECP mode
- 2 USB rear port with 1 USB header for front side 2 USB ports
- 1 IrDA connector for SIR.
- 1 VGA port
- 1 S-VIDEO for Video Output
- 1 AV-composite jacks for video output
- 1 Audio Port for Rear Panel
- 3 Audio ports for Front Panel
- 1 RJ45 LAN port
- 2 IEEE 1394 ports
BIOS
zThe mainboard BIOS provides “Plug & Play” BIOS which detects the
peripheral devices and expansion cards of the board automatically.
zThe mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
Mounting
z3 mounting holes.
CHAPTER 2CHAPTER 2
CHAPTER 2CHAPTER 2
CHAPTER 2 MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTIONMAINBOARD INTRODUCTION
MAINBOARD INTRODUCTION
2-5
2.2 Mainboard Layout
CALYPSO II MICRO LPX Mainboard
AT X
Power Supply
Socket 370
DIMM 1
DIMM 2
ICH2
SDRAM SDRAM
FWH
Intel
815
Chipset
(Solano)
VGA Port
USB1
1394
Speaker
Top:
mouse
Bottom:
keyboard
Printer Port
Diagnostic LED
FDD1
IDE2
IDE1
COM 1
BATT
+
Riser Card Connector
Intel
82562EM
Chipset
JWOL1
W83627HF
JMDM1
JRMS1
JKBV1
JLAN
RJ-45
JNTSC
IR1
SYSFAN
JBAT1
JFP1
CPUFAN
SOUND1
JCD1
JAUX1
JTAD1
S-Out AV-Out USB
Port
JUSB1
1394
JVTT1
1394
PHY
1394
MAC
Chrontel
CH7007
ADI
1881A
PWM
SCI164
CHAPTER1CHAPTER1
CHAPTER1CHAPTER1
CHAPTER1 CALCAL
CALCAL
CALYPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTALLAALLA
ALLAALLA
ALLATION GUIDETION GUIDE
TION GUIDETION GUIDE
TION GUIDE
1-1
Chapter 1
CALYPSO II CHASSIS INSTALLATION GUIDE
1. Overview
The CALYPSO II is a specially designed chassis for MS-6351
mainboard. The chassis can accomodate one Floppy drive,
Hard drive, and Standard CD-ROM. The chassis back panel
support one VGA, Network(UTP), Speaker,Serial Port, LPT,
PS/2®mouse and keyboard, IEEE 1394 ports, USB Ports, S/AV
connector for TV-Out.
2. Installation Tools
Tools you need before you start:
- screw driver (phillips cross head type)
- long nose pliers
- anti-static wrist strap or glove
- user’s guide.
3. Screw
Two types of screws are provided by the CALYPSO II: Flat head
screw and Screw w/washer.
Pan Head
Screw w/
Washer
This type of screw is used to mount the mainboard into the
Case.
This type of screw is used to mount the Floppy Drive, CD-ROM
Drive, and Hard Drive into the Case.
CHAPTER1CHAPTER1
CHAPTER1CHAPTER1
CHAPTER1 CALCAL
CALCAL
CALYPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTALLAALLA
ALLAALLA
ALLATION GUIDETION GUIDE
TION GUIDETION GUIDE
TION GUIDE
1-2
4. Front Panel Overview
n
o
pq
r
s
tu
v
w
1 3.5” Floppy Drive
2 Standard CD-ROM Drive
3 IR Windows
4 Power Switch
5 Power & Suspend LED
6 Hard Disk LED
7 Network LED
8 USBports
9 Earphone/Speaker Jack
10 Line-In Jack
11 Microphone Jack
Front Panel (B)
11
CHAPTER1CHAPTER1
CHAPTER1CHAPTER1
CHAPTER1 CALCAL
CALCAL
CALYPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTALLAALLA
ALLAALLA
ALLATION GUIDETION GUIDE
TION GUIDETION GUIDE
TION GUIDE
1-3
5. Installation Procedures
The Cables used
The Mainboard
Front Panel Audio/
USB peripheral with
cables
Front Panel IR Peripheral
with Cable
CHAPTER1CHAPTER1
CHAPTER1CHAPTER1
CHAPTER1 CALCAL
CALCAL
CALYPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTYPSO II CHASSIS INST
YPSO II CHASSIS INSTALLAALLA
ALLAALLA
ALLATION GUIDETION GUIDE
TION GUIDETION GUIDE
TION GUIDE
1-4
1. Remove the screws and
open the cover.
2. Release the lock to
remove the Front Panel
Bezel.
Riser Card
System Fan
Tabla de contenidos
Otros manuales de Placa madre de Premio
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
