DVR 1800 Installation and Operating Instructions 8
TIME OF DAY PROGRAMMING:
(Model DVRT Only)
Press *1 Time of Day Entry
• Press *1 (star key plus“1” key).
• The DVRT says“enter local”.
• Enter the five digit time of day as (day,hr,hr,min,min) Military time.
For example:Sunday @ 11:20 pm is entered as 1, 2, 3,2,0.
• The unit beeps, indicating that the time is successfully stored.
• If an invalid day of time is entered,a multiple error beep is heard
(the time is not stored).Pressing the“#” key will cause the time of
day entry to be aborted.
Press *2 Start/Stop Entry
This operation is used to store the start and stop time of the business.A
separate start and stop time must be stored for each day of the week.To
indicated that the business is not open on a given day,enter all 9’s for the start
and stop time.When the DVRT is first received, it has all 9’s entered in the start
and stop time for each day of the week.Therefore,re-programming is required
only for days that the business is open.
• Press *2.
• The DVRT says“enter number”.
• Enter the nine digit start and stop time as (day, hr,hr,min,min,hr,
hr,min,min).This entry is organized as (day, start time,stop time).
• The unit beeps, indicating that the times are successfully stored.
Invalid entries result in an error beep.Pressing the “#” key will
cause the entry to be aborted.
Press *3 Time of Day Playback
The DVRT will verbally say the current time of day.
• Press *3.
• The DVRT says“local is” and they says the current time of day as
(day,hr,hr,min,min).
• The DVRT will say“E” for any day or time entries that are not valid.
Press *4d Start/Stop Playback
The DVRT will verbally say the current start and stop time stored for a given day.
• Press *4 plus the day number to be inquired..
• The DVRT says“number is” and then says the current start/stop
time as (day,hr,hr,min,min,hr,hr ,min,min).
This entry is organized as (day, start time,stop time).
• The DVRT will say“E” for any day or time entries that are not valid.
