Premier Tech Aqua TAD-240 Manual de usuario

Premier Tech Aqua 1/5 Accessories - Installation Guide and Owner’s Manuel

Edition: 016-01-13

Adapter

dapterdapter

dapter

TAD

TADTAD

TAD-

- 40

4040

40/SC

/SC/SC

/SC,

, ,

, R

Risers

isersisers

isers

PSR

PSRPSR

PSR-

-060/140,

060/140, 060/140,

060/140,

Filter

ilterilter

ilter

Containers

ontainersontainers

ontainers

TLF

TLFTLF

TLF-

- 40/P

40/P40/P

40/P

and

andand

and

Access

ccessccess

ccess

Lids

idsids

ids

LID

LIDLID

LID-

- 40S/D

40S/D40S/D

40S/D

Installation

Installation Installation

Installation Guide

GuideGuide

Guide

and Owner’s Manual

and Owner’s Manual and Owner’s Manual

and Owner’s Manual

This guide provides information on Premier Tech

Premier TechPremier Tech

Premier Tech

Aqua

AquaAqua

Aqua’s

’s’s

’s septic tank adapter, access risers, ﬁlter containers and

access lids. For additional information, contact our customer service at 1 800 63

1 800 631 800 63

1 800 63 -

-6356

63566356

6356.

1. 1.

1. TAD

TADTAD

TAD-

- 40

40 40

40 and TAD

and TADand TAD

and TAD-

- 40SC

40SC 40SC

40SC access adapter

access adapteraccess adapter

access adapters

for

for for

for existing

existing existing

existing concrete septic tank

concrete septic tankconcrete septic tank

concrete septic tanks

The TAD- 40 access adapter has been especially designed for existing concrete septic tanks to eliminate the heavy

concrete lids as well as the added frustration of handles that are often corroded. Its unique design fits most type of

residential septic tank currently on the market. The adapter is conceived to facilitate the access to the tank for

inspection and pumping. The access adapter has a 510 mm ( 0") diameter opening and is compatible with PSR-060

and PSR-140 risers, depending on installation requirements (consult section . for more information on risers). The

access holes are then securely closed with the LID- 40S lids (consult section 4. for more information on lids).

Material included with the TAD- 40 access adaptor: 1 TAD- 40SC access adaptor without lid, 1 LID- 40S lid, 4 lag

screws with washers and 1 watertight seal.

1.1 Dimensions

1.1 Dimensions1.1 Dimensions

1.1 Dimensions

Premier Tech Aqua /5 Accessories - Installation Guide and Owner’s Manuel

Edition: 016-01-13

1. Installation Procedure

1. Installation Procedure1. Installation Procedure

1. Installation Procedure

To install the TAD- 40 adapter, completely clear the access wells until you reach the septic tank's concrete surface.

Remove the old riser(s).

Clean the surface of the concrete thoroughly where the adapter is to be installed. Make sure the surface of the adapter

is clean and dry and then install 19 mm X 19 mm (¾" X ¾") butyl coils (or equivalent) around the bottom of the adapter

as shown in the diagram below. Butyl coils are necessary to hold the adapter in place and ensure the watertightness.

Remove the backing paper from the butyl coil and then place the adapter on the septic tank. Make sure the adapter

and septic tank openings are aligned. Apply uniform pressure on the rim of the adapter. It is recommended to add

4 concrete screws on the adapter to make sure it stays in place. Install the PSR-060 or PSR-140 riser, if needed, on

top of the adapter as instructed in the next section.

Risers PSR

isers PSRisers PSR

isers PSR-

-060 and

060 and060 and

060 and

PSR

PSRPSR

PSR-

-140

140 140

140

Two types of risers are available: the PSR-060,

, 150 mm (6") in height and the PSR-140,

, ,

, 355 mm (14") in height. The

PSR-140

has four ﬂat surfaces to facilitate the installation of bulkhead union fittings for pipe connections of up to 100

mm (4") in diameter or waterproof electrical connectors.

Material included with the riser: 1 riser, 4 leg screws with washers and 1 watertight seal.

.1 Dimensions

.1 Dimensions.1 Dimensions

.1 Dimensions

Bottom view of the TAD

Bottom view of the TADBottom view of the TAD

Bottom view of the TAD-

- 40 adapter

40 adapter 40 adapter

40 adapter

6 mm ( 4 ½")

510 mm ( 0")

6 mm ( 4 ½")

510 mm ( 0")

150

mm (

355

(14")

PSR

PSRPSR

PSR-

-060

060060

060

RISER

RISERRISER

RISER

PSR

PSRPSR

PSR-

-14

1414

140

RISER

RISERRISER

RISER

19 mm X 19 mm (¾" X ¾") butyl coil

wound around adapter opening

3 50 mm (1 8") long

(not included)

4 butyl coils

19 mm X 19 mm (¾" X ¾")

500 mm ( 0") long

(not included)

75mm (3")

Premier Tech Aqua 3/5 Accessories - Installation Guide and Owner’s Manuel

Edition: 016-01-13

. Installation procedure

. Installation procedure. Installation procedure

. Installation procedure

The PSR-060 and PSR-140 risers are easy to install. The risers can be installed on several PTA products, such as the

TAD- 40 access adapter, the PSA- 40 pumping stations, the septic tanks, the holding tanks, the TLF- 40 reservoirs,

etc.

Install the seal around the opening of the product that will

be equipped with the riser, having ﬁrst made sure that the

surfaces are clean and dry. Place the riser on the desired

product making sure the openings are aligned. Finally,

screw the riser at the specified places using the four lag

screws and washers provided by PTA to ensure the

watertightness.

3. 3.

3. TLF

TLFTLF

TLF-

- 40

4040

and TLF

and TLFand TLF

and TLF-

- 40P

40P40P

40P

filter container

filter containerfilter container

filter containers

When it is impossible to install the effluent filter directly in the septic tank, it is possible to use PTA’s TLF filter

container. Two models of TLF filter containers are available: the TLF- 40P, equipped with effluent filter PL-1 from

Polylok (already assembled) and the TLF- 40, with no effluent filter, which can accommodate most types of effluent

filters currently available on the market. Thus, the effluent filter can quickly and easily be installed outside a septic

tank.

The TLF filter containers provide safe and easy access for the effluent ﬁlter’s inspection and maintenance. Made of

polyethylene, these reservoirs can be equipped with PSR-060 or PSR-140 PTA risers (consult section . for more

information on risers). The maximal

The maximal The maximal

The maximal riser

riser riser

riser height allowed

height allowed height allowed

height allowed above the TLF

above the TLFabove the TLF

above the TLF

filter container

filter containerfilter container

filter containers

is is

is of

of of

of 355 mm (14")

355 mm (14")355 mm (14")

355 mm (14").

Material included with the TLF filter containers: 1 filter container (with PL-1 for model TLF- 40P), 1 LID- 40D lid, 4

lag screws with washer and 1 watertight seal.

3.1 Dimensions

3.1 Dimensions3.1 Dimensions

3.1 Dimensions

3. Installation

3. Installation 3. Installation

3. Installation and maintenance

and maintenance and maintenance

and maintenance procedure

procedureprocedure

procedure

•Excavate the necessary area to install the reservoir. The base of the reservoir must be above groundwater table

at all times.

•Level and compact the excavated area and place the

TLF filter container. Handle the reservoir with care. The

maximum depth at which the TLF reservoir can be installed is of 1 370 mm (54"), which corresponds to the

height of the reservoir with a maximum of one PSR

PSRPSR

PSR-

-140 riser

140 riser140 riser

140 riser of 355 mm (14").

•Make sure to align the inlet of the reservoir with the pipe coming from the septic tank. Do not reverse the inlet

and outlet connections because the effluent filter must be on the side of the

the effluent filter must be on the side of the the effluent filter must be on the side of the

the effluent filter must be on the side of the TLF reservoir

TLF reservoir TLF reservoir

TLF reservoir outlet pipe.

outlet pipe.outlet pipe.

outlet pipe.

TLF

TLFTLF

TLF

40F Profile view

40F Profile view 40F Profile view

40F Profile view

4 stainless steel

304

lag screws

with 4 washers

Watertight seal

Riser PSR

060 150 mm (6") or

PSR-140 355 mm (14")

IN OUT

Premier Tech Aqua 4/5 Accessories - Installation Guide and Owner’s Manuel

Edition: 016-01-13

•Backfill the TLF filter container (with the lid on) up to the pipe level with material exempt of organic matter,

impervious soil, stones, debris, particles larger than 0 mm (¾") in diameter, or any other object that could

damage the reservoir. Do not compact the backfill.

•The backfill material must be placed into the excavation and not dumped. A backhoe is not recommended.

•Connect the inlet and outlet pipes to the TLF reservoir. The pipe that connects the septic tank to the reservoir

must be levelled with the invert of the septic tank’s outlet pipe. The pipe connecting the outlet of the reservoir

to the treatment system must have a downward slope of at least 1% (towards the treatment system).

•Complete the backfill up to 50 mm ( ") under the base of the lid. Do not bury or cover the lid, it must be

accessible for inspection and maintenance of the effluent filter at all times.

•Open the lid of the TLF reservoir to make sure that all its components are in place.

•Always close the lid of the TLF reservoir with the 4 lag screws provided for.

•Give the present document to the owner.

•During the annual inspection of the effluent filter, it is suggested to verify the level of the sludge at the bottom

of the TLF reservoir. PTA recommends emptying the reservoir at the same time as the septic tank or as needed.

LID

LIDLID

LID-

- 40

4040

40, LID

, LID, LID

, LID-

- 40

4040

40S and LID

S and LIDS and LID

S and LID-

- 40D access lids

40D access lids40D access lids

40D access lids

The LID

LIDLID

LID-

- 40

4040

40 lids allow to securely close the access of all the following PTA products:

•Polyethylene pumping stations series PSA- 40;

•Polyethylene septic tanks series PST;

•Polyethylene holding tanks series PHT;

•Self-cleaning DiUV disinfection unit;

•PSR-060 and PSR-140 risers;

•TAD- 40 septic tank adapter;

•PFS-300C to 1000C pressure flow dividers;

•Other products such as the TLX- 40, TSD- 40, TLF- 40/P, TLV- 40, PSX- 40, TLP-FDi, etc.

There are two models of lid: Single wall lid (LID- 40S)

Double wall lid (LID- 40D)

Material included with the LID- 40S or LID- 40D: 1 lid, 4 lag screws with washers and 1 watertight seal.

LID

LIDLID

LID-

- 40

4040

40D

LID

LIDLID

LID-

- 40

4040

40S

PLAN VIEW

A-A SECTION

PLAN VIEW

B-B SECTION

Premier Tech Aqua 5/5 Accessories - Installation Guide and Owner’s Manuel

Edition: 016-01-13

5. 5.

5. W

Warranty

arrantyarranty

arranty

Premier Tech Aqua’s accessories described in the present document are guaranteed against any defects (parts only)

for a period of one (1) year starting from the purchase date (proof of purchase required) if these accessories have

been installed and used according to the installation, operation and maintenance instructions as described in the

present Installation Guide and Owner’s Manual. The warranty only covers these accessories and does not extend to

peripheral equipments.

Exclusion

ExclusionExclusion

Exclusion

Premier Tech Aqua will not be liable for any damages, problems or expenses arising from inappropriate installation

or use of the product. This warranty will be null and void if product failure is caused by or arises from modifications,

faulty installation, improper usage or alterations.

The information contained in this document is based upon the latest information available at the time of publication and is d

esigned

to provide you with a general introduction to our products. We make no

warranties or representations as to its accuracy. We are

continually upda-ting and improving our products and reserve the right to amend, discontinue, alter or change specifications

and prices

without prior notice.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario