Declaration of conformity
CE - This product complies with the following protection requirements of EC Council directives:
2014/30/UE and subsequent changes;
2014/35/UE and subsequent changes.
Accordingly designed, it complies with the following harmonic rules:
EN 55022: 2010 AC:2011, EN 55024: 2010, EN 61000-3-2: 2014, EN 61000-3-3: 2013
EN60950-1:2006+A11:2009 +A1:2010 +A12:2012 +A2:2013
The symbol
indicates that the product is in conformance with the fundamental requirements, here above specified..
FCC rules
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables must be used in order to comply with emission limits.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Power Management Settings
A key ENERGY STAR requirement for thin client products is power management features that significantly reduce energy consumption when
the product is not in use.
Power management allows a computer to automatically enter a low power sleep mode, after a defined period of inactivity.
The default power management setting have been selected for compliance with ENERGY STAR that are reccomended by the ENERGY
STAR program for optimal energy savings.
The power management features have been preset as follows :
Time to activate
display
sleep mode
Time to activate thin
client
sleep mode
Resuming from sleep mode
After 15 minutes of
user inactivity After 30 minutes of
user inactivity Product will exit sleep mode when the power/sleep button is pressed.
Product will exit display sleep mode with a simple input signal, like moving the mouse
or press any key on the keyboard.
If Wake On Lan is enabled, the system can resume from sleep in response to a
network signal.
For further information on energy management benefits please visit: orwww.energystar.gov www.eu-energystar.org
