Powerx GAS Manual de usuario
Gas
Water Heater
Join us on our mission to save energy, water and the planet.
community.powerx.co
WELCOME TO THE POWERX FAMILY
Table of Contents
What’s included
Installation guide
1. Download the PowerX App & connect Hub
2. Connect to Wifi & add PowerX Water Heater
3. Mount PowerX Water Heater - Gas
4. Attach sensors
5. Connect PowerX Water Heater to power
6. Confirm connection
7. Add water leak detection cable (optional)
Connectors
Product specifications
Disclaimer
PowerX Suite
3
4
5
7
9
12
13
14
15
16
17
18
PowerX Water Heater - Gas
2 USB wall adapter and power cable
Set of temperature sensors
(Black, Blue, and Red)
5 Zip Ties
PowerX Hub
PowerX Mount
Gas valve connection cable
Water leak
detection cable
Optional
Water Heater
What’s included
3
1.1 Plug in the PowerX Hub
Download the PowerX App & connect Hub
1
Download and open the PowerX
App from your device’s app store
and follow the on-screen
instructions.
Scan your PowerX Hub’s QR code,
or type in the Hub’s ID manually.
You can find the Hub’s ID on the
bottom of the unit.
1.2 Download the PowerX App
1.3 Scan Hub’s QR code
4
PowerX Water
Get the PowerX App
www.powerx.co/app
CALIBRATION
COMPLETE
PowerX Water
Scan QR code
SCAN QR CODE
Enter code Validate
Connect the PowerX Hub to the wall
adapter and cable, and plug it in an
electrical outlet.
The Hub’s LED light will start to blink.
CALIBRATION
COMPLETE
PowerX Water
Select Wifi network
Wi-Fi 1
Home internet
Wi-Fi 2 Successfully added Hub
Water Heater
2.1 Connect to Wifi
2.2 Add PowerX Water Heater
Connect to Wifi and add PowerX Water Heater
2
Choose your local Wifi network,
select “Connect”, and enter your
Wifi credentials.
Your device is successfully
connected if you see the message
“Successfully added Hub” in the
mobile app, and the blinking blue
light on the device changes to
remain ON steadily.
5
CALIBRATION
COMPLETE
PowerX Water
Scan QR code
SCAN QR CODE
Enter code Validate
If you need further help please go to help.powerx.co
In the PowerX App select
“Add device”.
Then scan the QR code on
the bottom of the PowerX
Water Heater - Gas sensor or
type in the sensor’s ID
manually.
ADD DEVICE
2
Step by step guide to installing
PowerX Water Heater - Gas
cold pipe
7
Use the provided zip ties to carefully
secure the PowerX Mount to the cold
water pipe on your water heater.
3Mount PowerX Water Heater - Gas
3.1 Install PowerX Mount
Insert the PowerX Water Heater -
Gas unit into the PowerX Mount.
Mount PowerX Water Heater - Gas
3
3.2 Insert PowerX Water Heater - Gas
8
T&P valve
9
Gently insert the black temperature
sensor into the small opening between
the tank and the temperature and
pressure relief valve (T&P Valve).
Be sure to insert the sensor by a
distance of 1 inch or more if possible.
Secure the black sensor cable to the
T&P valve pipe using a zip tie. Make
sure the cable doesn’t cover the valve
or prevent the valve from operating in
any way.
4Attach sensors
4.1 Insert temperature sensor
Tabla de contenidos
Otros manuales de Calentador de agua de Powerx
