PowerAcoustik DTV-2U Manual de usuario
UNIVERSAL ATSC DIGITAL TV
RECEIER MODULE
User’s Manual
TABLE OF CONTENTS
Table of Contents………………………..…………………….…………….………………………..1
Safety Information…………………………….……………………………….………………………2
Features and Specifications...…………………..…………………..……………………………….3
Unit and Accessories………...…………………..…………………..……………………………….4
Wire Connection……………...…………………..…………………..……………………………….5
Remote Control…………………………………………………………………………………..……6
Menu Operations…………………………………………….…….….………………………………8
Special Features……………………………………………….…………..…..……………………17
NOTE:
This user's manual is only for reference.
Modifying rights are reserved.
Specifications are subject to change without notice.
SAFETY INFORMATION
Always be careful when using your product. To reduce the risk of fire, electrical shocks, and
other injuries, keep these safety precautions in mind when installing, using, and maintaining
your machine.
zBe sure to read this user’s manual before starting your operation.
zNever open the cover. It is very dangerous to touch the inside of the unit due to possible
electric shock.
zPlace the unit in a well ventilated and no heat environment.
zInstall the unit horizontally. Unbalanced installation may cause the unit to be damaged.
zWhen the unit is suddenly moved to a hot area from a cold area, it may cause problems.
In that case, turn off the power, and turn on after 1-2 hours.
zInstall the unit in a place with: good ventilation, suitable temperature, no direct sunrays,
low humidity, and low vibration influence.
zDo not put heavy objects on the unit.
FEATURES
Receiving full bank frequency rang: 57MHz-803MHz (center frequency)
Compliant with ATSC A/52 and QAM ITU-T J.83 ANNEX B 64/256QAM
Use high performance ATSC /QAM demodulator
Support OSD language options: English, Spanish, French
Electronic program guide (EPG) and on screen channel information
Program channel list
Favorite channel list
Closed caption supported (CCD)
Video aspect ratio: 4:3/16:9
SDTV 720*480P or 480i video output
2 channel stereo audio output
Antenna Jack: female F type,
SPECFICATIONS
RF input frequency 57MHz-803 MHz full band
Input impedance Input impedance
Channel bandwidth 6MHZ
Demodulator standard ATSC A/52 and QAM ITU-T J.83ANNEX B 64/256 QAM
Video decoder standard ISO/IEC 13818-1 MEPG-2 MP@HL
Video system NTSC
Video output 10 Bit DAC Composite video 1.0 +/_ 0.2Vp-p
Audio output 2.0 Vp-p Stereo
Audio language English, Spanish, French
Power supply DC input +10.8V-16V +/- 10% 0.5A
Power consumption 3W max
Dimension 99 (L)* 110 (W)* 26 (H)mm
Weight KG
UNIT
1. AV I/F 2. Remote Eye 3. Power LED 4. Anttnea
ACCESSORIES
Bolt x 1 Back Strap x 1 M5X5 Screws x 4 Keys x 2
1
2
34
WIRE CONNECTION
REMOTE CONTROL
1. POWER 8. RECALL 15. OK
2. MUTE 9. AUDIO 16. CH- / DOWN
3. NUMBER BUTTONS 10. PRG.L 17. MENU
4. LEFT/VOL- 11. FAV.L 18.EXIT
5. GUIDE 12. FAV.SET 19. INFO
6. RETURN 13. CH+ / UP 20. FORMAT
7. CAPTION 14. RIGHT/VOL+
1. POWER
Press to turn on / off the unit.
2. MUTE
Press to switch off the sound; press it again to resume to the previous volume level.
3. NUMBER BUTTONS
Press to input the channel number.
4. LEFT / VOL- / 14. RIGHT / VOL+
When Main Menu is not on screen, press to adjust TV volume.
When Main Menu is on screen, execute the selected item in the menu, or confirm the desired
value in input mode.
5. GUIDE
Press to display the on-screen Electronic Program Guide (EPG).
6. RETURN
Press to return to previous menu page.
7. CAPTION
Press to turn CAPTION on or off.
8. RECALL
Return to previous program.
9. AUDIO
Press to change the current audio language.
10. PRG.L
Press to display the all channels list.
11. FAV.L
Press to display the favorite channel list for setting.
12. FAV.SET
Press to switch up/down current channel set in favorite channel list.
13. CH+ / UP / 16. CH- / DOWN
When Main Menu is not on screen, press to select channel.
When Main Menu is on screen, press to move cursor up/down.
15. OK
Press to confirm the selection.
17. MENU
Press to display the Main Menu on the screen.
18. EXIT
Press to exit the menu directly.
19. INFO
Press to show information of the current channel.
20. FORMAT
Press to switch the screen size between NORMAL – 16:9 – 4:3.
MENU OPERATIONS
Press MENU key to display the main menu.
It consists of six items as following:
· Auto Search
· CH Setup
· CC Setup
· EAS Setup
· Parental Control
· System Setup
Figure 1
Use UP/DOWN keys to move up and down from
one item to another , and press RIGHT key to
display corresponding sub-menu.
Example:
In the Main menu, use UP/DOWN keys to select
Auto Search item, and press RIGHT key to
enter into Auto Search menu.
Figure 2
NOTE:
In any page of the menu, you can use RETURN key to return to previous menu page; or use
MENU key switch to Main Menu page and then use MENU key again to exit Main Menu; or
use EXIT key to exit Main Menu directly.
1. Auto Search
We suggest searching the TV program by
using the auto search function in Auto Search
menu for first use.
1> Use UP/DOWN keys to select Auto Search
item in Main menu, you will see the menu
as Figure 2.
2> Press RIGHT key to enter the Auto
Searching window (Figure 3). System will
search channels automatically.
After searching, the searched channels will be added Figure 3
to channel list and system will turn to full-screen mode
to view first searched program automatically.
During the searching, you can press LEFT key
to stop. When auto searching is completed or
stopped, you will see the information as
Figure 4
Also, you can press EXIT key to exit auto
searching mode.
Figure 4
Tabla de contenidos
