Power Soak Produce Soak Manual de usuario
Owner's Manual
Produce Soak –Fry Wash
Table of Contents
Introduction and Conventions......................................1
Product Introduction ....................................................2
Produce Washing Chemicals and Antimicrobials Error! Bookmark not
defined.
Explanation of Warning Messages...Error! Bookmark
not defined.
Danger................................................. Error! Bookmark not defined.
Warning ............................................... Error! Bookmark not defined.
Chemical Hazard ................................. Error! Bookmark not defined.
Operating Instructions..................................................5
Preparing the Produce Soak .......................................6
Placing the Wash Components............ Error! Bookmark not defined.
Rib sets............................................................................................7
Partitions.......................................... Error! Bookmark not defined.
Flow Guides..................................... Error! Bookmark not defined.
Filling the Produce Soak ........... Error! Bookmark not
defined.
Washing Tips .................................................................................19
Emptying the Produce Soak...... Error! Bookmark not
defined.
Preventive Maintenance ............................................23
Troubleshooting.........................................................25
Installation..................................................................29
Electrical Requirements.....................................................................31
Plumbing Requirements.....................................................................32
1
Introduction and Conventions
Produce Soak –Fry Wash
2
Product Introduction
Thank you for purchasing a Produce Soak potato fry washing system.
Your new Produce Soak washing system will provide years of dependable,
efficient and trouble-free service.
As a Produce Soak owner, you will benefit in numerous ways:
The Produce Soak washing operation will be more efficient.
The washing operation will remove starch from the surface and
improve the product quality.
The washing hours will decrease and your employee morale will
increase.
Water consumption will be reduced by more efficient washing
action.
Every system is manufactured to last, with only high-quality, heavy-duty, 14
gauge stainless steel used in its construction. All electrical components
used in a Produce Soak system are of the highest quality. The faucet and
drain are designed for quick filling and emptying of the system's sink.
At Power Soak Systems, we take pride in manufacturing the Produce Soak
and are committed to standing behind our customers and products 100%.
Should you ever need assistance, please contact us directly at the factory
by dialing 800-444-9624 or fax 816-761-0544.
3
Explanation of Warning Messages
Be sure to read, understand and follow all DANGER, WARNING, and
CAUTION messages located in this guide and on the equipment.
Personal Injury and Property Damage Hazard
Will result in serious injury or death.
Will cause extensive equipment damage.
Property Damage Hazard
Will result in property or equipment damage
Chemical Hazard
Will result in serious injury or death. Instructions, labels and
Material Safety Data Sheets (MSDSs) should be supplied with all
detergents and sanitizing chemicals. The manufacturers,
importers and distributors of the cleaning chemicals are
responsible for providing this information.
Personal Injury Hazard
Hazard from sharp objects, scalding, falling and/or drowning.
Will result in serious injury or death.
Children must not be allowed to play in the sinks, on countertops or with the
controls of the Power Soak equipment. Cleaning or use of this machine must not
be done by children without super vision. This machine can be used by children
aged 8 years or above and by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they are given supervision
and instruction concerning use of the appliance in a safe way and understand
the hazards involved. There is a potential of drowning for any person whose
head becomes submerged in the fluid contained in the sinks along with other
hazards identified in this manual.
4
- -This page left intentionally blank - -
5
Operating Instructions
Produce Soak –Fry Wash
6
Preparing the Produce Soak
Installing the Potato Cutter
The potato cutter is not manufactured by Power Soak and must be
purchased from another source. Power Soak does provide a mounting
bracket for attaching the potato cutter to the drain board of the Produce
Soak. A bolt kit is provided with the mounting bracket that includes the
mounting bolts, washers and LOCTITE thread locker for preventing the
bolts from loosening after installation.
Position the potato cutter
on the mounting bracket
with the base of the handle
of the cutter oriented over
the release tab on the
mounting bracket.
Clean the threads of the
screws and coat the
threads with the LOCTITE.
Move quickly before the
LOCTITE dries and insert
the screw through the
washer, the hole in the
mounting bracket and
screw it into the base of
the potato cutter. Repeat
this on all four corners of
the potato cutter and
mounting bracket in order
to secure the cutter to the
bracket.
Release Tab
Base of the Handle
Clean the bolt threads and then coat with LOCTITE
7
The potato cutter assembly is attached to the drain board with the
mounting bracket using the studs that are located on the wash tank drain
board. Place the rubber mounting pads over the studs, one on the front
studs and one on the rear studs. Position the mounting bracket and cutter
so that the large opening on the bottom of the bracket aligns with the head
of the stud and lower the bracket over the stud, pressing the cutter and
bracket onto the rubber pads. Push the cutter forward until the latch drops
over the head of the stud, securing the mounting bracket in position on the
drain board.
Place the rubber pad over the
studs on the drain board
Align the large opening over the
stud and lower the cutter mount
onto the rubber pads
When the cutter mount is resting on
the pads, push it forward toward the
wash sink to latch it in place
8
To remove the cutter, lift on the tab at the rear of the cutter and slide the
mounting bracket away from the wash sink
Lift on the tab and slide the cutter away from the wash sink
to remove it from the drain board.
Tabla de contenidos
Otros manuales de Arandela de Power Soak
