Maintenance and inspection
If the cleaning and safety notices provided are observed, the product will be
maintenance free.
▸Check product regularly for damage and to ensure that it is securely assembled.
▸In the event of damage and/or likely repairs, contact the dealer immediately.
The product must be checked by an authorized dealer before every re-use or after 24
months at the latest .
Cleaning and disinfection
The product can be cleaned and disinfected using commercially availa- ble agents.
▸Disinfect the product by wiping down all generally accessible surfaces with
disinfectant (after disassembling the product, if possible).
Shower Commode Cleaning in a domestic environment
1. Remove any accessories fitted.
2. Pull the footrests out.
3. Remove the seat cover.
4. Remove any accessories,
5. Reinsert the clips in the seat frame immediately so that they are not misplaced.
6. Wash the individual parts using a cloth or brush and commercially available
cleaning agents and disinfectants.
7. Rinse the parts with warm water.
8. Dry the parts with a cloth.
9. Re-assemble the product,
see Section 4 „Assembly and installation“.
Cleaning in a hospital environment
1. In addition to cleaning as described above, clean the product at regular intervals at
85 °C for 3 minutes in the autoclave.
Cleaning the backrest cover (optional)
Remove the backrest cover.
Wash the cover in a washing machine at max. 60 °C using a mild detergent.