Power Electronics SD700 Series Manual de usuario

Communication Network - Optical Fiber Communication

Communication Network

Optical Fiber Communication

Communication Network

Optical Fiber Communication

Edition: February 2012

SD70BC05AI Rev. A

SD700 –OPTICAL FIBER

POWER ELECTRONICS

SD700 - DEVICENET

SAFETY SYMBOLS

Always follow safety instructions to prevent accidents and potential

hazards from occurring.

Edition of February 2012

This publication could present technical imprecision or misprints. The

information here included will be periodically modified and updated, and all

those modifications will be incorporated in later editions.

To consult the most updated information of this product you might access

through our website www.power-electronics.com where the latest version of

this manual can be downloaded.

This symbol means improper operation may results in

serious personal injury or death.

Identifies shock hazards under certain conditions.

Particular attention should be given because dangerous

voltage may be present. Maintenance operation should be

done by qualified personnel.

Identifies potential hazards under certain conditions. Read

the message and follow the instructions carefully.

SD700 –OPTICAL FIBER

POWER ELECTRONICS

Revisions

Date Revision Description

06 / 02 / 2012 A First edition

POWER ELECTRONICS

SD700 –OPTICAL FIBER

INDEX

SAFETY INSTRUCTIONS..............................................................................7

1. DESCRIPTION .......................................................................................11

2. TECHNICAL CHARACTERISTICS ........................................................12

2.1. Packing list.................................................................................12

2.2. Specifications.............................................................................12

3. INSTALLATION AND CONNECTION....................................................13

3.1. Installation..................................................................................13

3.2. Description of Connectors and LEDs .........................................14

3.3. Master Slave Connection...........................................................15

4. CONFIGURATION..................................................................................16

4.1. Subgroup G4.6 Optical Fiber Parameters Setting ......................17

4.2. General Parameter setting…......................................................20

5. COMMISSIONING..................................................................................24

SD700 –OPTICAL FIBER

POWER ELECTRONICS

INDEX

POWER ELECTRONICS

SD700 –OPTICAL FIBER

SAFETY INSTRUCTIONS

IMPORTANT!

Safety instructions showed in this manual are useful to teach user

how to use the product in a correct and safety way with the purpose

of preventing possible personal injuries or property damages.

Safety messages included here are classified as it follows:

WARNING

Be sure to take ESD (Electrostatic Discharge) protection measures

when you touch the board.

Otherwise, the optional board may get damaged due to static charges.

Implement wiring change on the optional board after checking that

the power supply is off.

Otherwise, there is a danger of connecting error and damage to the

board.

Be sure to connect correctly the optional board to the inverter.

Otherwise, there is a danger of connecting error and damage to the

board.

Be sure to install a termination resistor (120Ω, 1/4W) at the end of the

network.

Do not remove the cover while the power is applied or the unit is in

operation.

Otherwise, electric shock could occur.

Do not run the inverter with the front cover removed.

Otherwise, you may get an electric shock due to the high voltage

terminals or exposure of charged capacitors.

SD700 –OPTICAL FIBER

POWER ELECTRONICS

SAFETY INSTRUCTIONS

Do not remove the cover except for periodic inspections or wiring,

even if the input power is not applied.

Otherwise, you may access the charged circuits and get an electric shock.

Wiring and periodic inspections should be performed at least 10

minutes after disconnecting the input power and after checking the

DC Link voltage is discharged with a meter (below 30VDC).

Otherwise, you may get an electric shock.

Operate the switches with dry hands.

Otherwise, you may get an electric shock.

Do not use cables with damaged insulation.

Otherwise, you may get an electric shock.

Do not subject the cables to the abrasions, excessive stress, heavy

loads or pinching.

Otherwise, you may get an electric shock.

CAUTION

Install the inverter on a non-flammable surface. Do not place

flammable material nearby.

Otherwise, fire could occur.

Disconnect the input power if the inverter gets damaged.

Otherwise, it could result in a secondary accident or fire.

After the input power is applied or removed, the inverter will remain

hot for a couple of minutes.

Touching hot parts may result in skin burns.

Do not apply power to a damaged inverter or to an inverter with parts

missing even if the installation is complete.

Otherwise, fire or accident could occur.

Do not allow lint, paper, wood chips, dust, metallic chips or other

foreign matter into the drive.

Otherwise, fire or accident could occur.

Otros manuales para SD700 Series

Tabla de contenidos

Otros manuales de Accionamiento de CC de Power Electronics

Power Electronics

Power Electronics SD300312 Manual de usuario

Power Electronics

Power Electronics XMV660 Series Manual

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD 500 Series Manual de usuario

Power Electronics

Power Electronics SD750K Manual de usuario

Power Electronics

Power Electronics SD700 Series Manual de usuario

Power Electronics

Power Electronics SD 500 Series Manual de lista de piezas

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SDRIVE 700 Series Manual de lista de piezas

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD 300 Series Manual de lista de piezas

Power Electronics

Power Electronics B150 Series Manual del operador

Power Electronics

Power Electronics SD700 Series Instrucciones de uso

Power Electronics

Power Electronics SD700 Series Manual de usuario

Power Electronics

Power Electronics SD 500 Series Manual de usuario

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD 300 Series Manual de usuario

Power Electronics

Power Electronics SD450 Series Manual de usuario

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD700SP Series Manual de usuario

Power Electronics

Power Electronics VFD Manual de usuario

Power Electronics

Power Electronics SD750 Series Manual de usuario

Power Electronics

Power Electronics SD 500 Series Manual de usuario

Manuales populares de Accionamiento de CC de otras marcas

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manual de usuario

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manual de lista de piezas

Chamberlain Garog

Chamberlain Garog D Series Manual de usuario

Parker

Parker PDS Series Manual de usuario

Festo

Festo DGC G Series Guía de configuración

Binks

Binks QS-5012-1-CE Manual de usuario

Danfoss

Danfoss VLT 2800 Series Hoja de especificaciones

ABB

ABB ACQ580-01 Series Manual de instalación

YASKAWA

YASKAWA CANopen SI-S3 Manual de usuario

GE D20A6 Manual de usuario

Unex

Unex MC-D-250-1000-050W-TW Manual de usuario

Geckodrive

Geckodrive G213V Manual de usuario

ABB

ABB RSYC-01 Manual de usuario

Rockwell Automation

Rockwell Automation PowerFlex 700S Manual del propietario

WEG

WEG DeviceNet CFW500 Manual de usuario

Siemens

Siemens SINAMICS G Hoja de datos

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Instrucciones de funcionamiento

SOMFY

SOMFY JR RU 30 Manual de usuario