POSIFLEX PD-6 07R Series Manual de usuario

Package Contents

7” PD-6X07R/ PD-6X07R-AR/ PD-6X07U /

PD-6X07U-AR customer display (x 1)

Stand base for PD-6207 series only (x 1)

RS-232 cable for PD-6X07R/ PD-6X07R-AR

only (x 1)

USB cable for PD-6X07U/ PD-6X07U-AR

only (x 1)

Mounting kits (x 1)

User manual (x 1)

Information CD (x 1)

Product Features

Among PD-6X07 series, PD-6X07R/ PD-6X07U are models which

support multiple languages, including English, Traditional Chinese,

Simplified Chinese and Japanese; PD-6X07R-AR/ PD-6X07U-AR are

models with Arabic language support.

7” Graphical customer line display

TFT LCD panel

20 x2, 20 x4, 30 x4 characters support

Adjustable font and background color

JPEG graphics display support

Command emulations support : ADM, Aedex, ESC/POS, Futaba,

Noritake, UTC

Compatibility with Posiflex terminals

Display Model

Posiflex POS model

PD-6207R/ PD-6207R-AR/

PD-6207U/ PD-6207U-AR

Any Posiflex terminal

PD-6307R/ PD-6307R-AR/

PD-6307U/ PD-6307U-AR

15”/17” KS series terminals

PD-6507R/ PD-6507R-AR/

PD-6507U/ PD-6507U-AR

HS series terminals

PD-6607R/ PD-6607R-AR/

PD-6607U/ PD-6607U-AR

XT series terminals

19520903020 Ver. A0

http://www.posiflex.com

PD-6X07R/ PD-6X07R-AR/

PD-6X07U/ PD-6X07U-AR

Customer Display User Manual

Views of the PD-6X07 Series

PD-6207 Series

Front View

Rear View

PD-6307 Series

Front View

Rear View

PD-6507 Series

Front View

Rear View

LCD

Mounting

Bracket

LCD

Mounting

Bracket

LCD

Stand Base

PD-6607 Series

Front View

Rear View

View of I/O Interface of PD-6X07R/ PD-6X07R-AR

View of I/O Interface of PD-6X07U/ PD-6X07U-AR

5V DC IN Jack

Mounting

Bracket

LCD

USB-B Type Port

RJ45 Port

USB-B Type Port

Mounting PD-6207 Series onto POS Terminal

Please follow the below instructions to install PD-6207 series customer display

onto your POS terminal. During installation, do NOT power ON the terminal.

In the example, XT-3000 POS terminal will be used to demonstrate how to

complete the installation.

1. Take the customer display and stand base out of

the package. While lifting the customer display

with one hand holding onto the tube, neatly pull

the extra cable through cable exit at the bottom

of the stand base.

2. To join the tube to the stand base, have the arrow

of the tube point towards the similar mark on the

stand base. Then, push down the tube until it is

locked into place. (To release the tube from the

stand base, hold down two release buttons, and

then twist and pull up the tube.)

3. Make sure the tube is well inserted to the stand

base.

4. Connect USB or RS-232 cable to the POS terminal.

If you are the PD-6207R/ PD-6207R-AR user, take RS-232 converter

cable and then attach DB9 connector to the DB9 COM port of your

terminal.

For PD-6207U/ PD-6207U-AR models, please insert USB Type-A

connector of USB cable into USB port of your terminal.

PD-6207R/ PD-6207R-AR

PD-6207U/ PD-6207U-AR

Cable Exit

Release

Button

Arrow mark

5. Make sure the other end of USB or RS-232 cable is well connected to

the customer display.

PD-6207R/ PD-6207R-AR

PD-6207U/ PD-6207U-AR

6. The installation of PD-6207R/ PD-6207R-AR/

PD-6207U/ PD-6207U-AR is completed.

7. Tilt up and down the customer display in the

direction shown by the arrow. Please do not

press on the LCD panel while adjusting the

titling angle.

Mounting PD-6307 Series onto 15”/17” KS series Terminal

The following section will give instructions on how to mount PD-6307 series

customer display onto 15”/17” KS series POS terminal. During installation, do

NOT power ON the terminal. In the example, KS-7515 POS terminal will be

used to demonstrate how to complete the installation.

1. Position your terminal with its rear facing

towards you.

2. Locate the “Posiflex” sticker at the rear of the

terminal. Use a pin tool to tear off the sticker

which is used to cover the screw holes.

3. Take L type mounting bracket out of the

package. Align the four screw holes of the

mounting bracket with the hole pattern at the

back of the terminal.

4. Insert four #6-32-12L fixing screws into the

screw holes and then tighten the screws to

secure the mounting bracket.

5. Lay the customer display on a flat surface with

its screen facing downwards.

6. While holding the customer display steady

with one hand, pull the monitor bracket

upright.

7. Lift the customer display to align three screw

holes of its own bracket to those on the bracket

attached to the terminal using the alignment

dots.

Alignment dots

8. Insert three #6-32-6L fixing screws into the

screw holes, and then tighten them to well

attach two brackets.

9. Make sure the customer display is well

mounted onto your terminal. .

10. Connect USB or RS-232 cable to the POS terminal.

If you are the PD-6307R/ PD-6307R-AR user, take the RS-232 cable

to attach DB9 connector to the DB9 COM port in the bottom I/O

compartment of your terminal.

For the PD-6307U/ PD-6307U-AR models, insert the USB Type-A

connector to the USB port of the terminal.

PD-6307R/ PD-6307R-AR

PD-6307U/ PD-6307U-AR

11. Position the terminal with its rear facing

towards you.

12. Connect USB or RS-232 cable to the customer display.

If you are the PD-6307R/ PD-6307R-AR user, plug the RJ-45

connector of RS-232 cable into the RJ-45 port of the customer

display.

For PD-6307U/ PD-6307U-AR models, have the USB Type-B

connector of USB cable attached to the USB port of your customer

display.

PD-6307R/ PD-6307R-AR

PD-6307U/ PD-6307U-AR

13. The installation of PD-6307R/ PD-6307R-AR/

PD-6307U/ PD-6307U-AR is completed.

14. Tilt the customer display in the direction

shown by the arrow in the figure. Please do not

press on the LCD panel while adjusting the tilt

angle.

Mounting PD-6507 Series onto HS series Terminal

Please go through below instructions to install PD-6507 series customer

display onto Posiflex HS series terminals. During installation, do NOT power

ON the terminal. In the example, HS-2208E POS terminal will be used to

demonstrate how to complete the installation.

1. Lay your POS terminal on a flat surface with its

rear facing towards you.

2. Press down the release tab of top I/O interface

cover.

3. Pull the top I/O cover in the direction shown by

the arrow in the figure to remove the cover.

4. Position the customer display on a flat surface.

While keeping it steady with one hands, pull the

rear mounting bracket upright as shown in the

figure.

5. Lift the customer display up to align the four

screw holes of the mounting bracket with the

holes in the top I/O interface compartment of

your POS as shown in the figure.

6. Insert four #6-32-8L fixing screws into the

screw holes and tighten them to secure the

mounting bracket.

7. Make sure the customer display is well secured

to the terminal.

8. Connect the USB or RS-232 cable to the customer display.

If you are the PD-6507R/ PD-6507R-AR user, plug the RJ-45

connector of RS-232 cable with the label describing “To PD” into

the RJ-45 port of your customer display.

For PD-6507U/ PD-6507U-AR models, plug USB Type-B

connector of USB cable into the USB port of the customer display.

PD-6507R/ PD-6507R-AR

PD-6507U/ PD-6507U-AR

9. Connect the USB or RS-232 cable to the POS terminal.

If you are the PD-6507R/ PD-6507R-AR user, attach the RJ-50

connector of RS-232 cable with the label describing “To Host” to

the RJ-50 COM port in the top I/O compartment of your terminal.

For PD-6507U/ PD-6507U-AR models, plug USB Type-A

connector of USB cable into the USB port of your terminal.

PD-6507R/ PD-6507R-AR

PD-6507U/ PD-6507U-AR

10. Break the release tab of the top I/O interface

cover.

11. Align the two wedge tabs of the top I/O cover

with two wedged portion of the top I/O

compartment of the terminal.

To Host

To PD

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de POSIFLEX

POSIFLEX

POSIFLEX PD-6807U Manual de usuario

POSIFLEX

POSIFLEX LM-2010 Manual de usuario

POSIFLEX

POSIFLEX LM-2208 Manual de usuario

POSIFLEX

POSIFLEX TM4000 Series Manual de usuario

POSIFLEX

POSIFLEX PD-2500 Series Manual de usuario

POSIFLEX

POSIFLEX LM-3315 Series Manual de usuario

POSIFLEX

POSIFLEX LM-2010 Manual de usuario

POSIFLEX

POSIFLEX LM-6807U Manual de usuario

POSIFLEX

POSIFLEX TM-30 Series Manual de usuario

POSIFLEX

POSIFLEX LM-2008 Manual de usuario

POSIFLEX

POSIFLEX LM4115 Manual de usuario

POSIFLEX

POSIFLEX LM-6801E Manual de usuario

POSIFLEX

POSIFLEX LM-7112 Manual de usuario

POSIFLEX

POSIFLEX LM-4011U Manual de usuario

POSIFLEX

POSIFLEX PD-2100 Series Manual de usuario

POSIFLEX

POSIFLEX LM-2108 Manual de usuario

POSIFLEX

POSIFLEX TM-3112HDMI Manual de usuario

POSIFLEX

POSIFLEX LM6112 Manual de usuario

POSIFLEX

POSIFLEX TM-2008E Manual de usuario

POSIFLEX

POSIFLEX PD-350R Manual de usuario

POSIFLEX

POSIFLEX PD-300 Series Manual de usuario

POSIFLEX

POSIFLEX TM-4011LVDS Manual de usuario

POSIFLEX

POSIFLEX PD302 Manual de usuario

POSIFLEX

POSIFLEX PD-2601 Series Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación