POSIFLEX PG-200/1D Manual de usuario
1
PG-200/1D
1D Barcode Scanner
User Manual
PG-200/1D
Package Contents
Pistol grip with 1D barcode scanner
(x1)
Stylus (x 1)
Battery pack for pistol grip (x 1)
PG-200/1D user manual (x 1)
Views of the PG-200/1D
Front view Left Side View
1D Barcode Scanner
Trigger Button
Battery Capacity Indicator
Battery Capacity Checking Button
Pistol Grip
Bottom View
Battery Pack Cover
12530902010 Ver. Original
http://www.posiflex.com
Load a Battery Pack and a stylus into the Pistol Grip
A user who purchases the PG-200/1D model has a battery pack
for pistol grip. Besides, the user also has a stylus that is packed in
the package box. To install the battery pack and stylus, refer to
the MT-4008W user manual.
Caution: After loading the battery into the pistol grip,
remember to charge the battery pack first with a charger or a
power adaptor connected between the tablet and an electrical
outlet. For the detailed description of battery charging, refer
to the section titled “Charging the Battery” as described in
the MT-4008W.
Connecting the Pistol Grip onto the Tablet
The pistol grip is provided with a 1D scan engine. Posiflex pistol
grip equipped with the 1D scan engine is just a gun grip for users
to easily operate the scanner. To install the pistol grip onto the
tablet, refer to the MT-4008W user manual.
Operating the 1D Barcode Scanner
This scanner works to scan 1D
barcodes. The scanner can work in
USB HID or USB Virtual COM
mode. By default, the scanner works
in USB HID mode.
2
The engine projects a bright red scan beam that corresponds to the
engine’s
scanning field of view. The scan beam should be
centered horizontally over the
bar code and must highlight all the
vertical bars of the bar code. It will not read
if the scan beam is in
any other direction.
Good Read No Read
Resetting the Factory Defaults
Caution! This selection erases all your settings and resets the engine to the
original factory defaults. It also disables all plugins.
If you aren’t sure what programming options are in your engine,
or you’ve
changed some options and want to restore the engine to
factory default set-
tings, first scan the Remove Custom Defaults
bar code, then scan Activate
Defaults. This resets the engine to
the factory default settings.
Remove Custom Defaults
Activate Defaults
3
Symbologies
This programming section contains the following menu selections.
AllSymbologies
Codabar
Code 39 Code 93
Interleaved 2 of 5 Matrix 2 of 5
UPC-A UPC-A/EAN-13 with Extended Coupon Code
Code 128
EAN/JAN-8
Telepen Code 11
EAN/JAN-13
MSI
UPC-E0
AllSymbologies
If you want to decode all the symbologies allowable for your
engine, scan the
All Symbologies On code. On the other hand, if
you want to decode only a
particular symbology, scan All
Symbologies Off followed by the On symbol for
that particular
symbology.
All Symbologies On
All Symbologies Off
Codabar
* On
Off
4
Code 39
* On
Off
Full ASCII
If Full ASCII Code 39 decoding is enabled, certain character pairs
within
the bar code symbol will be interpreted as a single
character.
For example, $V will be decoded as the ASCII character SYN, and
/C will be decoded as
the ASCII character #. Default = Off.
NUL %U DLE $P
SP
SPACE
0 0 @ %V P P ‘ %W p+P
SOH $A DC1 $Q !/A 1 1 A A Q Q a +A q+Q
STX $B DC2 $R “/B 2 2 B B R R b +B r+R
ETX $C DC3 $S #/C 3 3 C C S S c +C s+S
EOT $D DC4 $T $/D 4 4 D D T T d +D t+T
ENQ $E NAK $U %/E 5 5 E E U U e +E u+U
ACK $F SYN $V &/F 6 6 F F V V f +F v+V
BEL $G ETB $W ‘/G 7 7 G G W W g +G w+W
BS $H CAN $X (/H 8 8 H H X X h +H x+X
HT $I EM $Y )/I 9 9 I IY Y i +I y+Y
LF $J SUB $Z */J :/Z JJZ Z j +J z+Z
VT $K ESC %A +/K ;%F K K [%K k +K {%P
FF $L FS %B ,/L <%G L L \%L l +L |%Q
CR $M GS %C --=%H M M ]%M
m
+M }%R
SO $N RS %D ..>%I N N ^%N n +N ~%S
SI $O US %E //O ?%J O O _%O o +O DEL %T
5
Character pairs /M and /N decode as a minus sign and period
respectively.
Character pairs /P through /Y decode as 0 through 9.
Full ASCII On
* Full ASCII Off
Interleaved 2 of 5
* On
Off
Code 93
* On
Off
6
Matrix 2 of 5
On
* Off
Code 11
On
* Off
Code 128
* On
Off
GS1-128
* On
Off
7
Telepen
On
* Off
UPC-A
* On
Off
Convert UPC-A to EAN-13
* Transmit UPC-A as UPC-A
Transmit UPC-A as EAN-13
8
UPC-AAddenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A
data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
* 2 Digit Addenda Off
5 Digit Addenda On
* 5 Digit Addenda Off
UPC-AAddenda Required
When Required is scanned, the engine will only read UPC-A bar
codes
that have addenda. Youmust then turn on a 2 or 5 digit
addenda. Default = Not Required.
Required
* Not Required
9
UPC-E0
Most U.P.C. bar codes lead with the 0 number system. To read
these
codes, use the UPC-E0 On selection. If you need to read
codes that lead
with the 1 number system, use EAN/JAN-13.
Default = On.
* UPC-E0 On
UPC-E0 Off
EAN
/JAN-13
* On
Off
EAN
/JAN-8
* On
Off
10
Tabla de contenidos
Otros manuales de Lector de código de barras de POSIFLEX
POSIFLEX
POSIFLEX CD-3860 Manual de usuario
POSIFLEX
POSIFLEX CD-3860 Manual de usuario
POSIFLEX
POSIFLEX LS-1000 Series Manual de usuario
POSIFLEX
POSIFLEX CD-3860 Manual de usuario
POSIFLEX
POSIFLEX SK-200 Manual de usuario
POSIFLEX
POSIFLEX CD-3870 Manual de usuario
POSIFLEX
POSIFLEX CD-4860 Hoja de instrucciones
POSIFLEX
POSIFLEX CD-3830 Manual del propietario
POSIFLEX
POSIFLEX CD-3200U Manual de usuario
POSIFLEX
POSIFLEX PG-200/2D Manual de usuario
