POS-X EVO-TP4 Manual de usuario

USER MANUAL

EVO-TP4

Hardware System

VERSION V1.0 November 2010

Manual Version 1.0

Part Number: 3LMPP4850210

The information contained in this document is subject to change without notice.

We make no warranty of any kind with regard to this material, including, but not

limited to, the implied warranties of merchantability and fitness for a particular

purpose. We shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of

this material.

This document contains proprietary information that is protected by copyright. All

rights are reserved. No part of this document may be photocopied, reproduced

or translated to another language without the prior written consent of the

manufacturer.

TRADEMARK

Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation.

Microsoft® and Windows® are registered trademarks of Microsoft Corporation.

Other trademarks mentioned herein are the property of their respective owners.

Safety

IMPORTANT SAFETY INSTRUCTIONS

To disconnect the machine from the electrical power supply, turn off the power1.

switch and remove the power cord plug from the wall socket. The wall socket must

be easily accessible and in close proximity to the machine.

Read these instructions carefully. Save these instructions for future reference.2.

Follow all warnings and instructions marked on the product.3.

Do not use this product near water.4.

Do not place this product on an unstable cart, stand, or table. The product may fall,5.

causing serious damage to the product.

Slots and openings in the cabinet and the back or bottom are provided for6.

ventilation to ensure reliable operation of the product and to protect it from

overheating. These openings must not be blocked or covered. The openings

should never be blocked by placing the product on a bed, sofa, rug, or other

similar surface. This product should never be placed near or over a radiator or heat

This product should be operated from the type of power indicated on the marking7.

label. If you are not sure of the type of power available, consult your dealer or local

power company.

Do not allow anything to rest on the power cord. Do not locate this product where8.

persons will walk on the cord.

Never push objects of any kind into this product through cabinet slots as they9.

may touch dangerous voltage points or short out parts that could result in a re or

electric shock. Never spill liquid of any kind on the product.

iii

CE MARK

This device complies with the requirements of the EEC directive 2004/108/EC with

regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive”.

FCC

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that

may cause undesired operation.

CAUTION ON LITHIUM BATTERIES

There is a danger of explosion if the battery is replaced incorrectly. Replace only

with the same or equivalent type recommended by the manufacturer. Discard used

batteries according to the manufacturer’s instructions.

Battery Caution

Risk of explosion if battery is replaced by an incorrectly type. Dispose of used

battery according to the local disposal instructions.

Safety Caution

Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S)

related legislation, peripherals shall be 4.7.3.2 “Materials for re enclosure”

compliant.

4.7.3.2 Materials for re enclosures

For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material

of a FIRE ENCLOSURE, in the thinnest signicant wall thickness used, shall be of

V-1 CLASS MATERIAL or shall pass the test of Clause A.2.

For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all

STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest

signicant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass the

test of Clause A.1

LEGISLATION AND WEEE SYMBOL

2002/96/EC Waste Electrical and Electronic Equipment Directive on the treatment,

collection, recycling and disposal of electric and electronic devices and their

components.

The crossed dust bin symbol on the device means that it should not be disposed

of with other household wastes at the end of its working life. Instead, the device

should be taken to the waste collection centers for activation of the treatment,

collection, recycling and disposal procedure.

To prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they can

take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of

the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

Revision History

Changes to the original user manual are listed below:

Revision Description Date

1.0 Initial release•2010 Nov.

Table of Contents

1. Packing List.............................. 1

1-1. Standard Accessories..............................................1

1-2. Optional Accessories ...............................................2

2. System View ............................. 3

2-1. Front & Side View....................................................3

2-2. Rear View with stand...............................................3

2-3. I/O Ports View..........................................................4

2-4. System Dimension...................................................4

3. System Assembly & Disassembly 5

3-1. Stand Disassembly..................................................5

3-2. Power Adapter Replacement...................................5

3-3. HDD Replacement...................................................6

3-4. Open the System.....................................................7

3-5. RAM Replacement ..................................................8

4. Peripheral Installation ............. 9

4-1. MSR Installation ......................................................9

4-2. VFD Installation ......................................................10

4-3. Second Display Installation .................................... 11

vii

4-4. Wall Mount Kit Installation ......................................12

4-5. Cable Cover Installation .........................................13

4-6. Cash Drawer Installation ........................................14

5. Specications ......................... 16

6. Jumper Setting........................ 17

6-1. For C48 Motherboard .............................................17

6-1-1.Motherboard Layout ................................................ 17

6-1-2. Connectors & Functions .......................................... 19

6-1-3.Jumper & BIOS/Utility Setting ................................. 20

6-2.

For B68 Motherboard.............................................25

6-2-1. Motherboard Layout ................................................ 25

6-2-2. Connectors & Functions .......................................... 26

6-2-3. Jumper Setting ........................................................ 27

Appendix: Drivers Installation .... 30

viii

The page is intentionally left blank.

Packing List1.

Standard Accessories

1-1.

System (with stand)a.

Driver bankb.

Power adapterc.

Power cordd.

RJ45-DB9 cable (x3)e.

Optional Accessories

1-2.

MSR Modulea.

VFD Module (with RJ-45 cable)b.

Second Display (with VGA cable)c.

Wall Mount Kitd.

Cable Covere.

Otros manuales para EVO-TP4

Tabla de contenidos

Otros manuales de Terminal de pago de POS-X

POS-X

POS-X TP4 All-in-One Manual de usuario

Manuales populares de Terminal de pago de otras marcas

PAX

PAX D180SRF Manual de usuario

LinkPoint

LinkPoint AIO Manual de usuario

Moneris

Moneris hispeed 6200 Manual de usuario

Moneris

Moneris iWL220 Manual de usuario

Ingenico

Ingenico iUC280 Manual de usuario

Ingenico

Ingenico Tetra Move/5000 Manual de usuario

Ingenico

Ingenico iWL250B Manual de usuario

Optimum

Optimum M4230 Manual de usuario

Triton

Triton RL5000 Manual de usuario

Ingenico group

Ingenico group Lane/8000 Manual de usuario

Gilbarco

Gilbarco FlexPay IV CRIND Manual de instalación y operación

Infinite Peripherals

Infinite Peripherals Infinea Tab Lite Manual de usuario

PAX

PAX S920 Manual de usuario

Ingenico

Ingenico iCT220, iCT250 Manual de usuario

dejavoo

dejavoo Z Series Manual de usuario

VeriFone

VeriFone VX 520 Series Manual de usuario

Optomany

Optomany axept S900 Manual de usuario

Skyzer

Skyzer iWL252 BLUETOOTH Manual de usuario