PondMAX PS200 Manual de usuario

SOLAR PUMP KIT USER’S MANUAL

Design for fountain

Item No.: 02PS011

1. OVERVIEW

1) The solar pump is designed for outdoor or indoor fountain use, and is powered by a solar

panel. In order to make the pump work through solar energy, the solar panel needs to be

placed in the sunlight with its solar cells facing the sun as much as possible.

2) The performance of the pump depends on sunlight intensity and the incident angle at

which sunlight strikes the panel surface.

3) The latest DC brushless motor technology is introduced in the pump design and

manufacturing, so that the pump has high efficiency and long service life.

4) The pump flow rate can be adjusted by the flow valve (referring to the right figure).

2. COMPONENTS

1) Solar panel 2) Pump 3) Nozzles

3. ASSEMBLING

1) Unpack all components carefully.

2) For the application of producing a waterfall feature with a small garden water

decoration, fit the pump outlet to the water inlet of the decoration.

3) For the application of creating a small spraying up fountain, please follow the steps

below:

a) Fit the nozzle on the top of the pump tube, as shown in the right schematic, the

nozzle can produce 4 different jet shapes.

b) Fix the pump at the base of a basin or bottom of a small shallow pond etc..

c) It is best to keep the pump off the pond base to avoid drawing the pond waste into

the pump, which will lead to blockage in the pump. Use a brick or similar to

elevate the pump.

d) To produce excellent fountain effect, please leave the fountain head above the

water surface by using the extension tubes. If these 4pcs of extension tubes are all used and the pump

head is still immerged in the water, please uplift the pump body somehow.

4) Connect the pump to the solar panel, and tighten the protection screw.

5) Install the solar panel in garden lawn or soft ground by jabbing the spike into the ground. Adjust the knob at

the back of the panel and make the panel face the sun.

6) Make sure to keep the pump fully underwater while the pump is operating.

7) The solar pump is now ready to operate.

4. CAUTIONS

1) Any altering of the product itself or changing of the components voids warranty.

2) Do not connect the pump to anyAC power supply directly; it’s ONLY for DC power.

3) Operate the pump in water only (never above 40℃), especially keep it away from flammable liquids.

4) Do not strike the solar panel.

5) Do not let the pump run dry.

5. CLEANING AND MAINTENANCE

If the pump starts losing power or stops working after operating for a certain time, please clean

the pump following the steps below (See the above figures for demonstration):

1) Disconnect the pump.

2) Press on the bottom of the filter housing and meanwhile move the filter housing apart form the pump.

3) Turn the impeller cover counterclockwise to the end and then carefully pull the impeller cover apart from the

pump.

4) Remove the impeller wheel from the pump.

5) Wash every part to clean the debris.

6) Assemble the pump in reverse sequence.

7) Connect the pump.

*Be careful not to drop the ceramic axis while cleaning the impeller, it breaks easily.

6. TROUBLE SHOOTING

*Pump does not operate even though the solar panel is in full sunlight.

1) No connection to the solar module—check connection to the solar module.

2) Impeller is blocked—clean the pump as described in “CLEANING AND MAINTENANCE”.

*Pump does operate but there is no water running through the tubes: Clear the tube and the filter to make sure

the tube is through completely.

7. TECHNICAL DATA AND PUMP CURVE

Operation voltage

6 V

Peak power of solar panel

2 W

Maximum water lift height

0.7 M (2.3 FT)

Maximum flow rate

170 L/H (45 GPH)

Cable length

5 M (16.4 FT)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Bomba de agua de PondMAX

PondMAX

PondMAX PX4500 Manual de usuario

PondMAX

PondMAX APH200 Manual de usuario

PondMAX

PondMAX PV350L Manual de usuario

PondMAX

PondMAX 22EV200 Manual de usuario

PondMAX

PondMAX FP Series Manual de usuario

PondMAX

PondMAX EV1910LV-DC Manual de usuario

PondMAX

PondMAX PX Series Manual de usuario

PondMAX

PondMAX FP Series Manual de usuario

PondMAX

PondMAX SF650 Manual de usuario

PondMAX

PondMAX Evo II series Manual de usuario

PondMAX

PondMAX 22PV030 Manual de usuario

PondMAX

PondMAX evo II Series Manual de usuario

PondMAX

PondMAX EV11200 Manual de usuario

PondMAX

PondMAX PS200 Manual de usuario

PondMAX

PondMAX FP Series Manual de usuario

PondMAX

PondMAX Ultra CW750 Manual de usuario

PondMAX

PondMAX Evo II series Manual de usuario

PondMAX

PondMAX Evo II series Manual de usuario

PondMAX

PondMAX FP Series Manual de usuario

PondMAX

PondMAX PA Series Manual de usuario

PondMAX

PondMAX EV700 Manual de usuario

PondMAX

PondMAX HP550 Manual de usuario

Manuales populares de Bomba de agua de otras marcas

Neptun

Neptun NPHW 5500 Manual de usuario

Sensidyne

Sensidyne Gilian BDX-II Instrucciones de instalación y funcionamiento

Draper

Draper 47808 Manual de usuario

Trolla

Trolla 12820 Manual de usuario

Sunfab

Sunfab SVH Series Manual de usuario

WilTec

WilTec 50740 Manual de usuario

Fieldmann

Fieldmann FVC 5015 EK Manual de usuario

Everbilt

Everbilt EFSUB5-122HD Manual de usuario

Graco

Graco Husky 3300e Manual de usuario

esotec

esotec 101018 Manual de usuario

moyno

moyno 2000 CC Manual de usuario

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manual de usuario

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guía de solución de problemas

DUROMAX

DUROMAX XP WX Series Manual de usuario

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manual de usuario

Franklin Electric

Franklin Electric IPS Manual de usuario

Xylem

Xylem e-1532 Series Manual de usuario

Milton Roy

Milton Roy PRIMEROYAL Manual de usuario