POLYMath FS2000 Manual de usuario
Fingerprint Safe
POLYSECU-FS2000
After-sales Service
0592-5310833
Warranty Period: One Year (from the date of purchase)
User Manual—FS2000
【Preface】
Dear users, thank you very much for selecting our product! Our product
has adopted state-of-the-art technologies: ----Fingerprint recognition
technology, computer communication technology and micro-electronics
technology.
It is the product of electronics, optics and computer communication
technologies.
Before using the product, please read this user’s manual carefully,
understand all the relevant functions, master the basics of debugging,
maintenance, application and administration, so as to ensure the proper
usage.
2
User Manual—FS2000
【Table of Contents】
PRODUCT INTRODUCTION.................................................. 4
PARTS NAMES AND FUNCTIONS ........................................ 5
SYSTEM SETUP .................................................................... 7
"
Fingerprint Registration ........................................................ 7
Delete Fingerprints of All Users............................................... 8
L
Precautions of System Setup..................................................... 8
OPERATION OF THE SAFE.................................................... 9
Open the Door................................................................... 9
Close the Door.................................................................... 9
L
Precautions of System Operation ............................................ 10
È
Disposal of Emergencies......................................................... 10
SYSTEM MAINTENANCE AND TROUBLE SHOOTING......11
APPENDIX ........................................................................... 13
Technical Specifications (subject to change without notice).13
Precautions of Fingerprint Capturing................................... 14
1．Selection of Finger.......................................................... 14
2．Registration of Fingerprint................................................ 14
3. Correct Method to Press the Finger............................... 15
FINGERPRINT REGISTRATION FORM........................................... 16
FINGERPRINT REGISTRATION FORM........................................... 18
3
User Manual—FS2000
Product Introduction
Basic Features
Easy-to-Use: To unlock with your finger only;
Fingerprint Lock: No need for keys or passwords, which is more
secure;
One-to-Many Verification Mode: Fast capturing (0.5-1.0
second), small size and low cost;
Memory up to 30 fingerprints
Unrivaled high-tech and low-price product;
To be supported with high performance AA batteries, automatic
buzzing alarm at low battery, and guarantees several uses after low battery
alarm;
The bolts of steel door are driven by a highly-reliable,
endurable and energy-efficient micro motor;
The body and door of safe are to be made of high-quality
carbonized steel;
The system has adopted micro power waste and energy-efficient
technology, which hibernates automatically when idle.
Must Read before Use
Copy rights reserved, no unauthorized duplication is permitted;
Damages result from deliberate sabotage or improper use are not
subject to compensation.
Product Warranty
User service and support center;
On-line technical support;
One-year repair & maintenance service and renew within six months;
The warranty period starts from the date of purchase.
Installation of Batteries
4
User Manual—FS2000
5
Open the battery cover to install the batteries;
4 1.5V high performance AA batteries, the electrodes of battery should be
in strict accordance with the marks;
When the batteries are low, there will be eight consecutive buzzing
sounds to prompt the change of batteries;
Guaranteed several uses after the low battery alarm, but the batteries
should be changed as soon as possible.
Parts Names and Functions
Inner Side of the Door
①Battery Box: Open the cover to change the batteries;
②Green button for registration, and red button for deletion;
①
②
User Manual—FS2000
Outer Side of the Door (As illustrated in the following figure)
①Red LED: Unsuccessful user operation;
②Green LED: Successful user operation or the fingerprint lock is
on the “Open” status;
③Fingerprint scanner prism: To capture and verify fingerprints;
④Outer side handle: The user can pull open the door after the fingerprint has
been verified;
⑤Start Button
⑥Emergency Power Supply Socket, POLYSECU mark plate;
⑦Emergency Key Hole
④ ⑦ ① ②
⑤③ ⑥
6
User Manual—FS2000
System Setup
"Fingerprint Registration (Unlock the safe door before registration,
then lock it after the door is opened)
A fingerprint should be captured twice
1. Start the Registration Program: Press down the GREEN registration button
and hold it, then press the start button, the green LED indicates that the
system is ready for fingerprint registration;
2. Fingerprint Registration: After one buzzing sound, and the red LED on,
fingerprint scanner light is on, place one of your fingers on the prism
(Please refer to the Precautions of Fingerprint Capturing on P12), take your
finger away after the red LED is off, and the following three blinks of green
LED indicate the first successful capturing of fingerprint;
3. Fingerprint Verification: After two more buzzing sounds, and the red LED
on, fingerprint scanner light is on again, place the same finger on the prism
again, take away your finger away after the red LED is off, the blinking of
green LED indicates the successful verification of fingerprints. The green
LED will be off after a long buzzing sound, and the system returns to
hibernation.
4. The blinking of red LED and four buzzing sounds indicate the failure of
registration. Please repeat the above steps for registration.
7
User Manual—FS2000
Important Notice: Take away your finger after first successful capturing,
and press your finger on the prism again for second once. That means
for successful registration, the two places of fingerprint capturing
should not be the same.
Delete Fingerprints of All Users(Unlock the safe door before deletion,
then lock the bolts after the door is opened)
1. Press down the red delete button, and press the start button, the red LED
indicates that the system is ready for fingerprint deletion;
2. After one buzzing sound, the red LED will blink three times in a few
seconds, and the following long buzzing sound indicates the successful
deletion of all fingerprints.
LNote: this operation will delete under all circumstances all fingerprints
stored in the memory, so please be prudent to use this function.
LPrecautions of System Setup
If there is no registered fingerprint, the door can be opened by pressing start
button only. So the system should be set up in a timely manner to prevent
the existence of any insecurity.
Please make sure that all the operation buttons have been reset after the
system setup is completed.
Please test the system after fingerprint registration, so as to ensure the
correct setup.
Take out the battery and plug in outer backup power supply, test
8
User Manual—FS2000
the system with fingerprint so as to verify the effectiveness of outer power
supply.
Operation of the Safe
Open the Door
1. Press the start button, wait for one buzzing sound and the red scanner light
on.
2. Promptly press the registered finger on the fingerprint scanner prism, and
take the finger away after the red scanner light turns off;
3. If the fingerprint matches, the micro motor will drive the bolts open. The
red and green LEDs will both be on, and the scanner light will be off after a
buzzing sound, then pull the handle to open the door.
Close the Door
After closing the door, press the start button, the red and green LEDs will both
be on, and the motor will drive back the safe bolts, and a buzzing sound
indicates the door has been locked.
9
User Manual—FS2000
LPrecautions of System Operation
If the fingerprint verification fails, the red LED is on and there are four
buzzing sounds. Please check whether the fingerprint has been registered or
whether the finger has pressed correctly on the prism, then try again.
After the system is started, if there are eight consecutive buzzing sounds,
the batteries are low and should be changed as soon as possible.
If the door is not closed within 30 seconds after it is opened, there will be
an alarming buzzing sound at every 5 seconds interval.
ÈDisposal of Emergencies
If the inner power supply fails, please plug 6V outer power supply into the
outer power supply socket , and verify the fingerprint to unlock.
10
Tabla de contenidos
Manuales populares de Seguro de otras marcas
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manual de usuario
Hornady
Hornady SnapSafe Trunk Safe II Manual de usuario
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manual de usuario
Honeywell
Honeywell 5912 Manual de usuario
Phoenix
Phoenix FS1280F Manual de usuario
Phoenix
Phoenix SS0992K Hoja de información del producto
Technomax
Technomax Trony Series Manual
SPORTS AFIELD
SPORTS AFIELD INSTINCT BIOMETRIC Series Manual de usuario
RICHTER CZECH
RICHTER CZECH LA Manual de operación
Olymp
Olymp GOsafe 110 Manual de usuario
Phoenix
Phoenix SS0100E Hoja de información del producto
Clarke
Clarke Strong-Arm CS1000K Manual de instrucciones