Polygroup TG80M4C25C00 Manual de usuario

MODEL #: TG80M4C25C00

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting into the

assembled stand. Make sure the pole is firmly inserted and secured into the stand.

Note: Do not step on the tree legs during the setup. This may deform the tree stand and may result in an unbalanced tree.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Connect the plug(s) securely to the extension cord(s) as per the color labels indicated in Fig. B and insert the green label extension

cord plug into the wall outlet.Your entire tree should now be lit.If some bulbs do not light or flickers, search for any loose plugs

and/or broken, loose or missing bulbs. Connecting the plugs or replace the bad bulbs promptly in order to maintain the

performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out

one to the right, one to the left and one at the center of the main stem. (See Fig. C)

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

SKU#: 287-9001

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR +1 (888) 919-0070

Tree top

Section 2

Section 1

Insert

Green Label

Plug Into Wall

Outlet

Insert Red Label

Plugs Into Red

Labeled Extension Cord

*Electrical Rating For The Tree

(For Indoor Use Only)

2.38A 120V 60Hz

Fig. B - Tree and Light Assembly

1.Unfold the legs and lay the stand in

a flat area.Then slide the locking

disc downward and snap into place.

2.When inserting the bottom section

of the tree into the assembled stand,

thread the eyebolt into the stand

and tighten until the pole is firmly

secured.

Fig. A - Tree Stand Assembly Eye Bolt

1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord from the wall outlet and then disconnect

light extension cord between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in

both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the

bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or

humidity may damage your tree.

STORAGE INSTRUCTIONS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected according to the color labels indicated in Fig.B and the

power cord is plugged into the wall outlet. Refer to assembly guide for instructions.

2. Please check for blown fuses at the light string plugs and power cord plug.Replace as needed.

Note: Please make sure to use appropriate replacement fuses as indicated on the light string plug and power cord plug.

3. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs and fuses are also included.

If extra parts are needed, please contact our customer service center.

SPARE PARTS

Top view Side view

Fig. C

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches

to fill any gaps.Your Christmas tree is now complete and ready to be decorated.

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, DO NOT RETURN TO PLACE OF PURCHASE. Contact us at +1 (888) 919-0070

or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Customer Name:

Address: (No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

CAUTION

1.To reduce the risk of fire and electric shock:

a) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal.

b) Do not mount or support strings in a manner that can cut or damage wire insulation.

2. Ensure the ladder is securely fixed and is not slippery.

Be cautious when climbing up and down the ladder.

Be cautious when

using ladder to

set up tall trees

Este manual sirve para los siguientes modelos

Otros manuales de Pino artificial de Polygroup

Polygroup

Polygroup TV70M4G26C02 Manual de usuario

Polygroup

Polygroup TG76P5433D01 Manual de usuario

Polygroup

Polygroup TG76M3K79D11 Manual de usuario

Polygroup

Polygroup TV46P7001X00 Manual de usuario

Polygroup

Polygroup TG76M2W75L07 Manual de usuario

Polygroup

Polygroup TG90M5340X01 Manual de usuario

Polygroup

Polygroup TG86M4C25C00 Manual de usuario

Polygroup

Polygroup TG76P4772D12 Manual de usuario

Polygroup

Polygroup TG76P4787D00 Manual de usuario

Polygroup

Polygroup SCP112781A Manual de usuario

Polygroup

Polygroup TG7000MZAC00 Manual de usuario

Polygroup

Polygroup TG76P4751D17 Manual de usuario

Polygroup

Polygroup TG76M2ATCC00 Manual de usuario

Polygroup

Polygroup AR-P17004 Manual de usuario

Polygroup

Polygroup TV40M4F65C00 Manual de usuario

Polygroup

Polygroup TG70M4839C12 Manual de usuario

Polygroup

Polygroup TV60M2389C01 Manual de usuario

Polygroup

Polygroup AR-P16008 Manual de usuario

Polygroup

Polygroup TG70CH119P00 Manual de usuario

Polygroup

Polygroup TV70EN432C03 Manual de usuario

Polygroup

Polygroup Home Heritage TG50M3ABAD02 Manual de usuario

Polygroup

Polygroup TG66M3ABAD00 Manual de usuario

Polygroup

Polygroup TGC0M4907C02 Manual de usuario

Polygroup

Polygroup TG7600NVQC20 Manual de usuario

Manuales populares de Pino artificial de otras marcas

Trim a Home

Trim a Home TY-S6-250L Manual de usuario

Sears

Sears Donner & Blitzen M44814 Manual de usuario

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manual de usuario

Costway

Costway CM23595US Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manual de usuario

Holiday Living

Holiday Living TV40EH339C01 Manual de usuario

CASARIA

CASARIA DBGB001 Manual de usuario

Alpine

Alpine CRD100L-WT Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manual de usuario

CASARIA

CASARIA 104006 Manual de usuario

Alpine

Alpine CRD111S-GN Manual de usuario

Home Accents Holiday

Home Accents Holiday 1001540584 Manual de usuario

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manual de usuario

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manual de usuario

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday 1004363936 Manual de usuario

Polytree

Polytree TG66EH148C17 Manual de usuario