Polygroup TG76M3K79D09 Manual de usuario

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

3. Each tree section is numbered with a sticker.Please identify all sections before assembling.

4. Assemble the tree from bottom to the top. Start with the bottom section and remove the protective cap before inserting into

the assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Insert green label extension cord into adaptor and adaptor insert into the wall outlet. (See Fig. B), your entire tree should now

be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the

plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one

to the right, one to the left and one at the center of the main stem. (See Fig. C)

Top view Side view

Fig. C

MODEL #: TG76M3K79D09

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set®

technology-Set up and light up your tree in less than 10 minutes!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

Please scan code to

learn how to shape

and set up your tree

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120V, 60Hz, 0.16A Max.

Output: 29V, DC 0.28A

Fig. B - Tree and Light Assembly

Tree Top

Section 2

Section 1

Adaptor

To Be Plugged

Into Wall

Outlet

Control box Insert Green

Label Extension

Cord into Adaptor

Fig. A - Tree Stand Assembly

Unfold the legs and lay the

stand in a flat area.Then slide

the locking disc downward and

snap into place.

Do Not Tamper

Internal Parts

Open the

protective

cap

Do Not Tamper

Internal Parts

Open the

protective

cap

SPARE PARTS

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included. If extra parts are needed, please contact

our customer service center.

1. Use only power adapter supplied with this product, using a different adaptor will damage the lights and cause fire, electrical

shock hazards.

2. FOR INDOOR USE ONLY.

WARNING

HOW TO USE THE DUAL COLOR LIGHT CONTROLLER :

Press the selector button on the “Dual Color Light Controller” to select among:

(1) CLEAR-MULTI:FADING; (2) CLEAR:FADING; (3) CLEAR-MULTI:ALTERNATING;

(4) CLEAR:STEADY; (5) CLEAR-MULTI:SLOW FADING; (6) MULTI:STEADY;

(7) MULTI:FADING; (8) COMBINATION. Light

Controller

Selector

Button

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill

any gaps.Your Christmas tree is now complete and ready to be decorated.

STORAGE INSTRUCTIONS

1. Unplug the power cord from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. Continue by gently lifting straight up each section(s) from the section below and fold all branches

toward the pole until the bottom section is removed from the tree stand. Cover the cap on the

poles to avoid damaging the internal parts. (See Fig. D)

4. Carefully place all tree sections into shipping box and tape it shut.

5.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree

to excessive heat or humidity may damage your tree.

Fig. D

TROUBLESHOOTING TIPS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected and the power cord is plugged into the wall outlet.

2.Turning the poles gently to make sure pole to pole are connected into place.

3. Check for loose connection between light string plugs and extension cords.

4. Please check for loose, broken or missing light bulbs and replace as needed.

1. Extra hinge pins are included for repairing the hinges.Place the branch

into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure using the retainer

washer.(See Fig. E)

Loose Hinge Pin

Fig.E

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070

or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Thank you for purchasing a Polygroup product.

Please recycle the following.

(Note: Contents of bag must be removed prior to recycling)

Small Plastic BagBubble Wrap

LDPE

Otros manuales de Pino artificial de Polygroup

Polygroup

Polygroup TV70M3AHYC00 Manual de usuario

Polygroup

Polygroup TG70M2Y43L02 Manual de usuario

Polygroup

Polygroup TV90M2389C01 Manual de usuario

Polygroup

Polygroup NOMA ADVANCED 151-8410-6 Manual de usuario

Polygroup

Polygroup TG66EH035S01 Manual de usuario

Polygroup

Polygroup TG70M3ABAD01 Manual de usuario

Polygroup

Polygroup TG7600NVQC32 Manual de usuario

Polygroup

Polygroup TG76P4617P06 Manual de usuario

Polygroup

Polygroup TG76M4836C02 Manual de usuario

Polygroup

Polygroup TG76P4861C00 Manual de usuario

Polygroup

Polygroup TV70M3AP6C01 Manual de usuario

Polygroup

Polygroup TG76M4C92C00 Manual de usuario

Polygroup

Polygroup TV40M4F65C00 Manual de usuario

Polygroup

Polygroup TG76P4B16P02 Manual de usuario

Polygroup

Polygroup TG50P3D94L00 Manual de usuario

Polygroup

Polygroup TG80M3AWVL01 Manual de usuario

Polygroup

Polygroup TG76P4724D03 Manual de usuario

Polygroup

Polygroup TG4000FHEC00 Manual de usuario

Polygroup

Polygroup TG46M6159C00 Manual de usuario

Polygroup

Polygroup TG76M2J96P00 Manual de usuario

Polygroup

Polygroup TG76M3AJIC03 Manual de usuario

Polygroup

Polygroup AR-P17004A Manual de usuario

Polygroup

Polygroup AR-P17005A Manual de usuario

Polygroup

Polygroup Home Heritage TG5000GHDL00 Manual de usuario

Manuales populares de Pino artificial de otras marcas

Trim a Home

Trim a Home TY-S6-250L Manual de usuario

Sears

Sears Donner & Blitzen M44814 Manual de usuario

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manual de usuario

Costway

Costway CM23595US Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manual de usuario

Holiday Living

Holiday Living TV40EH339C01 Manual de usuario

CASARIA

CASARIA DBGB001 Manual de usuario

Alpine

Alpine CRD100L-WT Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manual de usuario

CASARIA

CASARIA 104006 Manual de usuario

Alpine

Alpine CRD111S-GN Manual de usuario

Home Accents Holiday

Home Accents Holiday 1001540584 Manual de usuario

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manual de usuario

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manual de usuario

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday 1004363936 Manual de usuario

Polytree

Polytree TG66EH148C17 Manual de usuario