Polygroup AR-P18006 Manual de usuario

ASSEMBLY INSTRUCTIONS MADE IN CHINA

Top view Side view

Fig. C

MODEL #: AR-P18006

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top.Start with the bottom section and remove protective cap

before inserting into the assembled stand.Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all

wires are free of branch hinges.

7. Connect light string and adaptor plugs as indicated in Fig. B, and plug it in to the wall outlet.Your tree

should now be lit. If not, please see TROUBLESHOOTING TIPS.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from

the pole and fan out one to the right, one to the left and one at the center of the main stem. (see Fig. C)

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform

look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.

Fig. B - Tree and Light Assembly *Electrical Rating For The Tree

(For Indoor/Outdoor Use)

Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions

below on how to quickly and easily set up your new tree.

Section 2

Tree top

Section 1

Assemble

Red Labels

Together

Assemble

Blue Labels

Together

Assemble

Yellow Labels

Together

Insert

Green Label

Plug Into Wall

Outlet

Plug Adaptor

Into Wall

Outlet

Insert Green

Label Extension

Cord into Adaptor

Assemble

Purple Labels

Together

Input: 120V, 60Hz,0.16A

Output: 29V 0.28A 0.85A120V, 60Hz

Fig. A - Tree Stand Assembly

Click

Pull apart the legs of the stand so that they

are snapped into an x-shape, place the tree

stand on a level surface.

To close the stand, press the metal button

and fold the legs together.

ASSEMBLY INSTRUCTIONS MADE IN CHINA

STORAGE INSTRUCTIONS

TROUBLESHOOTING TIPS

SPARE PARTS

1. Remove all ornaments and decorations. Unplug from power source, and disconnect all light string and

adaptor plugs.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to

remove from section below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and

rotate the upper pole in both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches

toward the pole until the bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to

excessive heat or humidity may damage your tree.

If The Tree Does Not Illuminate

1. Check to make sure that all plugs and/or adaptors are properly connected as indicated in Fig. B.

2.Turning the poles gently to make sure pole to pole are connected into place.

3. Check for loose connection between light string plugs and extension cords.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

Each tree includes hinge pins/washers, and spare bulbs. If extra parts are needed, please contact our

customer service center.

Fig.D

WARNING

1. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights

and cause fire, electrical shock hazards.

2. FOR INDOOR USE ONLY.

3. The external flexible cable or cord of this product cannot be replaced; If the cord is damaged,

the luminaire shall be destroyed.

Simply press the selector button of the light controller to select from

the following motion effects:

(1) STEADY GLOW (2) CHASER (3) SHUFFLE

(4) STARFIELD (5) RAY GUN (6) TWINKLE

(7) SPARKLE (8) 123-321 (9) SHIMMER (10) COMBO

HOW TO USE THE LIGHT CONTROLLER

Light Controller

Selector

Button

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

b. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.When

products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting

(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.

c. This seasonal use product is not intended for permanent installation or use.

d. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

e. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

f. Do not let lamps rest on the supply cord or on any wire.

g. Unplug the product when leaving the house, when retiring for the night, or if left unattended.

h. This is not a toy. For decorative use only! To avoid risk of fire, burns, personal injury and electric shock it

should not be played with or placed where small children can reach it.

i. Do not use this product for other than its intended use.

j. Do not hang ornaments or other objects from cord, wire, or light string.

k. Do not close doors or windows on the product or extension cords as this may damage wire insulation.

ASSEMBLY INSTRUCTIONS MADE IN CHINA

l. Do not cover the product with cloth, paper or any material not part of the product when in use.

m. Read and follow all instructions that are on the product or provided with the product.

n. The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.

o. For LED string only. Risk of fire.This product does not contain lamp shunts, which allow the product to

operate if one lamp burns out. Lamps are non-replaceble.

p. For LED string only.To reduce the risk of fire or electric shock, Do not attempt to replace lamps or

modify string.

q. SAVE THESE INSTRUCTIONS.

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact

us at 1-888-919-0070 or visit our website at www.polygroupstore.com. One of our customer service

representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Customer Name:

Address(No P.O. Boxes):

City & State:

Zip Code:

Day Phone:

Date Purchased:

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

CAUTION:

1. Risk of fire. Do not replace lamps with other than the spare lamps provided with this product.

2.To reduce the risk of fire and electric shock:

a. Do not mount or support light strings in a manner that can cut or damage wire insulation, and

b. Use only the power supply cord provided with this product.

Otros manuales de Pino artificial de Polygroup

Polygroup

Polygroup TG70M3K77C00 Manual de usuario

Polygroup

Polygroup TG90P4724D01 Manual de usuario

Polygroup

Polygroup 124331173 Manual de usuario

Polygroup

Polygroup TG76P6059D03 Manual de usuario

Polygroup

Polygroup Corona TG50ON041P00 Manual de usuario

Polygroup

Polygroup Evergreen Classics TG76P4525D02 Manual de usuario

Polygroup

Polygroup TG90M3APIL00 Manual de usuario

Polygroup

Polygroup TG70P3D94D00 Manual de usuario

Polygroup

Polygroup TG40P4174L00 Manual de usuario

Polygroup

Polygroup Illumination Color Blast Manual de usuario

Polygroup

Polygroup 212T-206/48-100CL Manual de usuario

Polygroup

Polygroup TG76P3945P01 Manual de usuario

Polygroup

Polygroup TG46M4E28D00 Manual de usuario

Polygroup

Polygroup 124331177 Manual de usuario

Polygroup

Polygroup TG76P3831D07 Manual de usuario

Polygroup

Polygroup TV70M4I13C01 Manual de usuario

Polygroup

Polygroup TG76M3P68M00 Manual de usuario

Polygroup

Polygroup TG9000CIKX00 Manual de usuario

Polygroup

Polygroup TG76M3Z07C05 Manual de usuario

Polygroup

Polygroup H209507 Manual de usuario

Polygroup

Polygroup TG76P4870C00 Manual de usuario

Polygroup

Polygroup TGC0P3499C06 Manual de usuario

Polygroup

Polygroup 1455658 Manual de usuario

Polygroup

Polygroup TV90M2U56C00 Manual de usuario

Manuales populares de Pino artificial de otras marcas

Trim a Home

Trim a Home TY-S6-250L Manual de usuario

Sears

Sears Donner & Blitzen M44814 Manual de usuario

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manual de usuario

Costway

Costway CM23595US Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manual de usuario

Holiday Living

Holiday Living TV40EH339C01 Manual de usuario

CASARIA

CASARIA DBGB001 Manual de usuario

Alpine

Alpine CRD100L-WT Manual de usuario

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manual de usuario

CASARIA

CASARIA 104006 Manual de usuario

Alpine

Alpine CRD111S-GN Manual de usuario

Home Accents Holiday

Home Accents Holiday 1001540584 Manual de usuario

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manual de usuario

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manual de usuario

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manual de usuario

Home Accents Holiday

Home Accents Holiday 1004363936 Manual de usuario

Polytree

Polytree TG66EH148C17 Manual de usuario