Polycom KIRK Manual de usuario
ActivAtion Guide
1
Polycom KIRK Base and Handset Activation Process
Base Unit Activation
Before activating any handsets assigned to the base, you must activate the base unit.
Here’s how:
1. Equipment Connected—Make sure the base (and handsets) you want to activate are connected
and powered up.
2. Order Shipped Email—Refer to the Order Shipped email for the Activation Codes for the base
unit.
3. Turn on a new handset.
• You will see Enter AC (Activation Code) on the phone screen.
• Enter the code 0000 to enable the handset to communicate with the base unit.
Enter AC code...
1
Number:
00000
OK Exit
Auto-subscription
KIRK
TIP: If you are not prompted to
Enter AC, power down the
handset, wait 2 minutes
and power it up again. If
that fails, please refer to
the Advanced Activation
section of this document
for instructions.
ActivAtion Guide
Polycom KIRK Base and Handset Activation
2
4. Dial 1 to enable the handset to temporarily connect to the base.
1
1
Save Delete
Dialing
KIRK
587421094459#
Mic Mute Loud on
Connected with
KIRK
• Enter the activation code for the base, followed by the #key.
• You will hear a recorded message conrming your activation was successful.
• You will see a ashing red light on top of the base unit while it automatically restarts.
• After a few minutes, you will see a solid green light on the base unit.
You are now ready to activate the handsets for this base.
ActivAtion Guide
Polycom KIRK Base and Handset Activation
3
Handset Activation
Once you’ve activated the base, you can now connect the handsets to it.
Important: If you have multiple handsets, be sure to activate your handsets in the exact order specied in the Order Shipped email.
1. Order Shipped Email—Refer to the Order Shipped email for the Activation Codes for the handset(s) you wish to activate. This email also
species the order to activate them in.
2. Check Your Base Unit—Be sure you’ve already activated the base unit and it is within 100 feet of the handset(s).
3. Power Down Handset—Power down the handset you are activating by holding down the left softkey for 2 seconds, then press Yes.
4. Power Up Handset—Wait 2 minutes, then hold down the left softkey for 2 seconds to power up the handset.
5. Enter Activation Code—You will see Enter AC (Activation Code) on the phone screen. Enter the 4-digit activation code for the handset.
Enter AC code...
1
Number:
5683
OK Exit
Auto-subscription
KIRK
TIP: If you are not prompted to
Enter AC, power down the
handset, wait 2 minutes
and power it up again. If
that fails, please refer to
the Advanced Activation
section of this document for
instructions.
After you enter the activation code, you will see Connecting... on the handset screen.
Connecting...
Menu
Auto-subscription
KIRK
Shortcut Menu
1002
KIRK
Shortcut
16:57
You will see your extension number on the display. Your handset is ready to use.
ActivAtion Guide
Polycom KIRK Base and Handset Activation
NASDAQ: EGHT
www.8x8.com
© 2011. The 8x8, Inc. logo is a registered trademark of 8x8, Inc. 8x8, Inc. is a publicly traded company. PM463/1211
The Champion
For Business
Communications
Advanced Section for Activation (use only if needed)
Use this method to manually enter an activation code ONLY if you cannot get the Enter AC prompt or if a connection to the base you want to
connect to fails.
To manually enter an activation code
1. Using the softkey sequence: [Menu] ›[Settings] ›[Advanced] ›[Login] ›[Create Login] ›{Select Base Unit] ›[Enter AC]
2. Enter Activation Code—Enter the activation code and press the # key.
How to select base units
If you have multiple base units, after you select Create Login, you may need to select the base unit you need to connect to from a list of
base units. This is done based on the ARI number printed on the back of the base units. Just select the ARI number of the base unit you are
connecting to.
If you encounter diculty after a few attempts to activate, please contact 8x8 Support at 888.898.8733.
Do not press the reset button on the base unit, unless instructed to by 8x8 Support, as it will do a full factory reset and you
will lose your ability to connect your cordless KIRK phones to 8x8 phone service.
Otros manuales para KIRK
4
Tabla de contenidos
Otros manuales de Teléfono de Polycom
Polycom
Polycom Polycom VVX 600 Manual de usuario
Polycom
Polycom VVX 300 Instrucciones de montaje
Polycom
Polycom 2200-12651-001 Manual de instrucciones
Polycom
Polycom IP 600/601 Manual de usuario
Polycom
Polycom VVX 301 Manual de usuario
Polycom
Polycom VVX 501 Series Instrucciones de funcionamiento y seguridad
Polycom
Polycom SpectraLink BC4900 Manual de usuario
Polycom
Polycom VVX 101 Manual de servicio
Polycom
Polycom Poly VVX 250 Manual de usuario
Polycom
Polycom VVX 300 Guía
Polycom
Polycom VVX Series Manual de usuario
Polycom
Polycom VVX 400 Manual de usuario
Polycom
Polycom Integra VVX 500 Manual de usuario
Polycom
Polycom VVX410 Manual de usuario
Polycom
Polycom VVX 250 Manual de usuario
Polycom
Polycom SoundPoint IP 600 SIP Manual de usuario
Polycom
Polycom VVX 101 Manual de usuario
Polycom
Polycom Soundpoint IP 301 Manual de usuario
Polycom
Polycom SpectraLink 8020 Manual de instrucciones
Polycom
Polycom VVX410 Manual de usuario
