Polycom VVX 500 Manual

Polycom VVX

Admin Guide

Schmooze Com Inc.

500, 600 & 1500

DND

HEADSET

HOLD

TRANSFER

CONF

SP PHONE

REDIAL

APP

DIR

MSG

ABC

GHI

JKL

MNO

PQRS

TUV

WXYZ

OPER

DEF

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

How To Find The IP Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Platform” option and press the “Select” button.

4. Scroll down to the “Phone” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see the IP Address.

How To Find The MAC Address

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Status” option and press the “Select” button.

3. Scroll down to the “Network” option and press the “Select” button.

4. Scroll down to the “Ethernet” option and press the “Select” button.

5. Use the up/down arrow key to scroll through the list of information to see

the MAC Address.

How To Set The Configuration Server

Quick Steps

1. Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select” button.

6. Scroll down to the “Network Configuration” option and press the

“Select” button.

7. Scroll down to the “Server Menu” option and press the “Select” button.

8. Pick the Server Type such as TFTP and set the Server Address and press the “Select” button.

The Server address would be the IP address of your PBX.

How To Factory Default

Quick Steps

1.Press the “Menu” button.

2. Scroll down to the “Settings” option and press the “Select” button.

3. Scroll down to the “Advanced” option and press the “Select” button.

4. Enter the admin password and press the “Enter” button. Default factory password is 456.

5. Scroll down to the “Admin Settings” option and press the “Select button”.

6. Scroll down to the “Reset to Default” option and press the “Select” button.

7. Scroll down to the “Format File System” option and press the “Select” button.

Otros manuales para VVX 500

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Teléfono IP de Polycom

Polycom

Polycom SoundStation IP 7000 Manual de usuario

Polycom

Polycom SoundStation IP335 Manual de usuario

Polycom

Polycom Poly VVX 350 Manual

Polycom

Polycom SoundPoint IP 550 Manual de usuario

Polycom

Polycom VVX 300 Manual de usuario

Polycom

Polycom CX3000 Manual de instrucciones

Polycom

Polycom SoundPoint IP 331 Manual de usuario

Polycom

Polycom SoundPoint IP 550 Manual de usuario

Polycom

Polycom SoundPoint IP 335 Manual de instrucciones

Polycom

Polycom VVX Series Manual de usuario

Polycom

Polycom SoundPoint IP 3 Series Manual de usuario

Polycom

Polycom VVX 500 series Manual de usuario

Polycom

Polycom VVX 500 series Manual de usuario

Polycom

Polycom VVX 250 Instrucciones de montaje

Polycom

Polycom SoundPoint IP 601 Manual de usuario

Polycom

Polycom SoundStation IP 6000 Manual de instrucciones

Polycom

Polycom CX300 Manual de usuario

Polycom

Polycom VVX 300 Manual de usuario

Polycom

Polycom VVX 311 Manual de usuario

Polycom

Polycom VVX 411 Manual de usuario

Polycom

Polycom VVX 601 Series Manual de usuario

Polycom

Polycom SoundPoint IP 670 Manual de usuario

Polycom

Polycom SoundPoint IP 320 Manual de usuario

Polycom

Polycom VVX 500 series Manual de usuario

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Cisco

Cisco SPA-500 Series Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

Avaya

Avaya Integral 5 R3.0 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Avaya

Avaya 4600 Series Manual de servicio

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario

Nortel

Nortel i2050 Manual de usuario

Fiberme

Fiberme FAP260 Series Manual de usuario

Meridian

Meridian M5009 Manual de usuario