Polycom Polycom SoundPoint IP 430 Manual de usuario
Polycom IP 430 User Guide
Polycom IP 430 User Guide
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 2 of 13
Table of Contents
Table of Contents ......................................................................................................................2
Introduction...............................................................................................................................3
The Polycom IP430 IP Phone 3
Web Portal .................................................................................................................................3
Telephony Toolbar....................................................................................................................4
Document Format.....................................................................................................................4
Feature Functionality................................................................................................................4
Feature Functionality................................................................................................................5
Account Codes - Verified 5
Account Codes - Unverified 5
Ad-Hoc Conference Calling 5
Call Forward Always 6
Call Forward Busy 7
Call Forward No Answer 7
Call Park 7
Call Park Retrieve 7
Call Pickup 8
Directed Call Pickup 8
Call Return 8
Call Transfer – Blind 8
Call Transfer – Consult 8
Call Transfer – To Voicemail 9
Call Waiting 9
Cancel Call Waiting Per Call 9
Caller ID Blocking Per Call 10
Caller ID Delivery Per Call 10
Dialing 10
Do Not Disturb 10
Hold 11
Last Number Redial 11
Push-to-Talk 12
Speed Dial 100 12
Speed Dial 8 12
Voicemail 13
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 3 of 13
Introduction
The purpose of this document is to inform Zayo Managed Services users on how use the Polycom IP430 Phone
with their Hosted PBX Service Each feature available with the Professional Seat will be described along with
instructions on how to use the feature Some users may not have all of the functionality described in this
document Seat type purchased determines which features are available
The Polycom IP430 IP Phone
Web Portal
The Zayo Managed Services Web Portal is a robust online tool used to configure calling features such as do-not-
disturb and selective call forward While most features can be activated using the phone, you may want to explore
the Web Portal to fully enjoy all of the powerful call management tools available Please see your company’s
Administrator for access to the Web Portal
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 4 of 13
Telephony Toolbar
The Telephony Toolbar is a software application for Microsoft Outlook, Microsoft Internet Explorer, or Mozilla
Firefox and can be used to configure calling features such as do-not-disturb and call forward, and can also be used
for a wide variety of click to call features The Telephony Toolbar complements the Web Portal and allows users
easy access to often used calling features Please see your company’s Administrator for more information on the
Telephony Toolbar
Document Format
Below is an example of how each feature will be presented and examined in this document
F ATUR NAM
AND
D SCRIPTION
ST P BY ST P
INSTRUCTIONS
FOR XT ND D
F ATUR
FUNCTIONALITY
ST P BY ST P
INSTRUCTIONS
FOR USING TH
F ATUR
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 5 of 13
Feature Functionality
Account Codes - Verified
Requires a user to enter a unique number that identifies to which account an outbound call should be assigned
Using the Feature
1 GO OFF HOOK
2 Dial the NUMB R of the party you wish to call
3 An IVR will instruct you to enter your Account Code
4 Once your code is entered the call will connect
Extended Functionality
A user can turn a particular account code on for a sustained amount of time by using a star code
Sustained Account Code Activation
1 GO OFF HOOK
2 Press *47
3 An IVR will instruct you to enter your Account Code
Sustained Account Code Activation
1 GO OFF HOOK
2 Press *37
Account Codes - Unverified
Allows a user to enter a unique number to identify to which account an outbound call should be assigned
Using the Feature
1 GO OFF HOOK
2 Press *02
3 An IVR will instruct you to enter your Account Code You will hear a stutter dial tone then a normal
dial tone
4 Dial the NUMB R of the party you wish to call
Ad-Hoc Conference Calling
Allow a user to make a three-way conference call
Using the Feature
1 During an active call, press the CONFRNC soft key This will place the current caller on hold and
provide dial tone
2 Dial the NUMB R of the party you wish to add to the call and press the S ND soft key
3 When the party answers, press the CONFRNC soft key to add the caller to the existing call
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 6 of 13
Extended Functionality
A user may use the CONF R NC Feature Key instead of the soft key
Splitting a Conference Call
1 To split the existing conference call, press the SPLIT soft key This places both calls on hold on
separate lines
2 Using the DISPLAY CONTROL keys, select the call you would like to disconnect, press the
R SUM soft key, then press the NDCALL soft key
3 Press the R SUM button once the first call is disconnected to speak with the caller that is still
connected
Call orward Always
Allow a user to redirect all incoming calls to another phone number Users have the option to activate and
deactivate the service by using the soft keys, or by dialing a feature code
NOT : The user must use the same method to turn the function off that they used to turn the function on
Otherwise, the system will not recognize the ‘off’ command
Using the Feature
Activate: Using the Soft Keys †
1 Press the FORWARD soft key
2 Using the DISPLAY CONTROL keys, select the LIN that you want forwarded
3 Press the S L CT soft key
4 Enter the forwarding NUMB R with the K YPAD
5 Press the NABL soft key
† This soft key is not available if the phone number is shared on another phone
Deactivate: Using the Soft Keys
1 Press the FORWARD soft key
2 Using the DISPLAY CONTROL keys, select the LIN that you want forwarded
3 Press the S L CT soft key
4 Press the DISABL soft key
Activate: Using the Feature Code
1 GO OFF HOOK
2 Press *72
3 Follow the IVR instructions
Deactivate: Using the Feature Code
1 GO OFF HOOK
2 Press *73
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 7 of 13
Call orward Busy
Enable a user to redirect calls to another destination when the user’s line is busy Normally, a call would be directed
to a user’s voicemail
Using the Feature
Activate:
1 GO OFF HOOK
2 Press *90
3 Follow the IVR instructions
Deactivate
1 GO OFF HOOK
2 Press *91
Call orward No Answer
Enable a user to redirect calls to another destination when an incoming call is not answered within a specified
number of rings Normally, a call would be directed to a user’s voicemail
Using the Feature
Activate: Using the Feature Code
1 GO OFF HOOK
2 Press *92
3 Follow the IVR instructions
Deactivate: Using the Feature Code
1 GO OFF HOOK
2 Press *93
Call Park
Enables a user to place a call on hold and allow a user to pick up the call at another phone
Using the Feature
1 During an active call, press the HOLD soft key This will place the caller on hold
2 Press the N WCALL soft key
3 Press *68
4 Follow the IVR instructions
Call Park Retrieve
This feature enables a user to pickup a call that has been placed on hold using the Call Park feature
Using the Feature
1 GO OFF HOOK
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 8 of 13
2 Press *88
3 Follow the IVR instructions
Call Pickup
This feature enables a user to pickup a call that is coming in on another user’s line The other user’s line must be in
the same ‘pickup group’ with the user activating the feature Pickup groups are pre-configured by the System
Administrator
Using the Feature
1 GO OFF HOOK
2 Press *98
Directed Call Pickup
This feature enables a user to pickup a call that is coming in on another user’s line without being specifically
assigned to a common group The other user’s line must also have the Directed Call Pickup feature assigned to it
Using the Feature
1 GO OFF HOOK
2 Press *12 plus the extension that you wish to pickup
Call Return
Allows a user to call back the last number that called their line, regardless of whether or not the phone was
answered
Using the Feature
1 GO OFF HOOK
2 Press *69
Call Transfer – Blind
Allow incoming calls to be transferred to another line without consultation with the receiving party
Using the Feature
1 During the call, Press the TRNSF R soft key This will place the caller on hold and provide dial tone
2 Press the BLIND soft key
3 Enter the transfer NUMB R with the K YPAD
4 Press the S ND soft key
5 HANG UP
Extended Functionality
A user may use the TRANSF R Feature Key instead of the soft key
Call Transfer – Consult
Allow incoming calls to be transferred to another line with consultation with the receiving party
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 9 of 13
Using the Feature
1 During the call, press the TRNSF R soft key This will place the caller on hold and provide dial tone
2 Enter the transfer NUMB R with the K YPAD
3 Press the S ND soft key
4 When the second party picks up you may consult with them
5 Press the TRNSF R soft key to transfer the call
6 Press the CANC L soft key to return to the first caller without transferring the call
Extended Functionality
A user may use the TRANSF R Feature Key instead of the soft key
Call Transfer – To Voicemail
Allow incoming calls to be transferred to any user’s voicemail
Using the Feature
1 During the call, press the HOLD soft key or button This will place the caller on hold
2 Press the N W CALL soft key to get a dial tone
3 Dial *55
4 Follow the IVR instructions Press the # key to send the caller to your own voicemail box To send
the caller to another voicemail box, enter the desired extension followed by the # key
Call Waiting
This feature enables a user to answer a call when engaged in another call When a second call is received while a user
is engaged in a call, the user is informed via a call waiting tone
Using the Feature
Retrieving the Second Call
1 When a call rings in, use the DISPLAY CONTROL keys to select the second LIN
2 Press the ANSW R soft key
Getting Back to the First Call
3 Use the DISPLAY CONTROL keys to select the LIN which is on hold
4 Press the R SUM soft key This places the other call on hold
Extended Functionality
Sending the Second Call to oicemail
5 When a call rings in, use the DISPLAY CONTROL keys to select the second LIN
6 Press the R J CT soft key
Cancel Call Waiting Per Call
Allow users to turn off call waiting on a call-by-call basis
Polycom IP 430 User Guide
Zayo Managed Services IP430 User Guide Page 10 of 13
Using the Feature
1 GO OFF HOOK
2 Press *70 You will hear a stutter dial tone then a normal dial tone
3 Dial the NUMB R of the party you wish to call
Caller ID Blocking Per Call
Allow users to block their caller ID on a call-by-call basis
Using the Feature
1 GO OFF HOOK
2 Press *67 You will hear a stutter dial tone then a normal dial tone
3 Dial the NUMB R of the party you wish to call
Caller ID Delivery Per Call
Allow users to deliver their caller ID on a call-by-call basis when they have turned on the Caller ID Blocking feature
within the Web Portal
Using the Feature
4 GO OFF HOOK
5 Press *65 You will hear a stutter dial tone then a normal dial tone
6 Dial the NUMB R of the party you wish to call
Dialing
Allow a user to make a call
Using the Feature
Placing a Call
1 Pick up HANDS T, press the N WCALL soft key, or press the SP AK RPHON K Y
2 Enter the number you wish to call
3 Press the S ND soft key, or wait to connect
Extended Functionality
Placing a Call
1 Dial the NUMB R you wish to call using the K YPAD
2 Press the DIAL soft key
Do Not Disturb
Allow users to set their station as unavailable so that incoming calls are given a busy treatment Depending on how
the user has set up their busy treatment, the callers will be directed to voicemail or forwarded to another line
NOT : The user must use the same method to turn the function off that they used to turn the function on
Otherwise, the system will not recognize the ‘off’ command
Otros manuales para Polycom SoundPoint IP 430
12
Tabla de contenidos
Otros manuales de Teléfono IP de Polycom
Polycom
Polycom CX500 Lync Edition Manual de usuario
Polycom
Polycom SoundPoint IP 501 Manual de usuario
Polycom
Polycom BUSINESS VOICEEDGE 335 series Manual de usuario
Polycom
Polycom Integra VVX 500 Manual de usuario
Polycom
Polycom VVX 500 series Manual de usuario
Polycom
Polycom SoundPoint IP 550 Manual de usuario
Polycom
Polycom PENNNET 650 Manual de usuario
Polycom
Polycom SoundPoint IP 550 Manual de usuario
Polycom
Polycom Integra VVX 500 Manual de usuario
Polycom
Polycom VVX 150 Manual de instrucciones
Polycom
Polycom SoundPoint IP 321 Manual de instrucciones
Polycom
Polycom VVX 250 Manual de instrucciones
Polycom
Polycom VVX 310 Manual de usuario
Polycom
Polycom SoundPoint IP 601 Manual de instrucciones
Polycom
Polycom Polycom SoundPoint IP 430 Manual de instrucciones
Polycom
Polycom SoundPoint IP 335 Manual de usuario
Polycom
Polycom SoundPoint 650 Manual de usuario
Polycom
Polycom SoundPoint IP 650 Manual de instrucciones
Polycom
Polycom SoundStation IP 7000 Manual de usuario
Polycom
Polycom VVX 250 Instrucciones de montaje
