PNI HOUSE H804 Manual de usuario
PNI HOUSE H804
DVR / NVR
EN User manual ............................................. 2
BG Ръководство за потребителя ................ 27
DE Benutzerhandbuch ................................... 52
ES Manual de usuario .................................... 77
FR Manuel utilisateur ..................................... 102
HU Használati utasítás ................................... 127
IT Manuale utente ........................................ 152
PL Instrukcja obsługi ..................................... 177
RO Manual de utilizare ................................... 202
EN
2
MAIN FUNCTIONS
Real time surveillance
Surveillance via monitor: Analog output interface, VGA or HDMI
Storage
The HDD works only during recording, which reduces energy consumption and extends life
Note: The HDD is not included
Compression
Real-time compression on the storage device, which allows stable audio and video quality
Backup
Via the USB interface: on USB storage devices
Playback
Real time recording
Multiple play mode: 1 or 4 channels on the screen
Zoom on certain areas of the image
Communication interface
Standard internet interface
Intelligent operation
Control device from the mouse
Quickly copy settings from one channel to another
INSTRUCTIONS FOR USE
Installing the storage unit
At rst use, please install the storage unit. A single internal HDD of 6TB capacity (the HDD is not
included in the package) can be installed in the recording unit casing.
• Unscrew the screws
• Remove the lid
• Fix the HDD
• Connect the data cables
• Fix the lid
• Connect the power cord
Starting the device
Plug the power cord and turn on the device. The LED will turn on and you will hear a beep. By
default, 4 channels will be displayed on the screen.
If the start time falls within the preset recording schedule, then the recording function will start
automatically.
Notes:
1. Check that the input voltage corresponds to the recommended device voltage. The power
supply voltage is 230V ± 10% / 50Hz.
2. We suggest using a UPS to protect the device from voltage variations.
EN
3
Stopping the device
There are two ways to stop the device:
1. Go to the main menu (right-click on the screen) and select the Logout option - Shutdown
2. Turn o the power supply.
Special warnings:
1. Restart after power failure: If the device is abnormally shut it can create a backup and restart
from that status after the power returns.
2. Replacing the battery on the motherboard: Before replacing the battery, you must save your
system settings and turn o the power source. Device time must be rescheduled after replacing
the battery. We recommend replacing the battery every year.
Remote control:
You can control your camcorder in real-time as follows:
- through dedicated Windows-compatible CMS software
- through Internet Explorer
- through the dedicated XMEye-compatible app with iOS, Android.
System loghin
After turning on your device, log in to your system.
By default, the user admin it is protected by password 1234. If your password is entered
incorrectly 5 times in a row, your account will be blocked. By restarting your device or after half
an hour, your account will be unlocked automatically.
Note: For your system security, please change your password after your first login.
Channels preview
You can right click to change view mode: 1 or 4 channels. Or, double-click on one of the channels
to switch to full-screen mode.
Recrding Image loss
Motion detection Blocked camera
Menu
In preview mode, you can access the on-screen menu by right-clicking on the image below.
EN
4
The menu included:
Main menu, Guide), Record mode, Playback, PTZ control, XVI control, High speed PTZ, Color
settings, Output adjust, Logout, View 1/4
1. MAIN MENU
By accessing the main menu the interface will look like in the image below.
1.1 Record
The recording operations include: Record cong, Playback, and Backup.
EN
5
1.1.1 Record cong
Go to Main menu - Record - Record cong (Record setup)
Set recording parameters on each channel or all channels at the same time. The system is set to
start recording 24 hours continuously.
Note: The HDD must be set to read / write mode.
Channel: Choose the channel number for which you want to set up the recording. Choose All to
make settings for all channels at the same time.
Redundancy: The function is not active for this model
Length: Set the length of each recording le (in minutes). The default is 60 minutes.
Pre-Record: Recorded between 1 and 30 seconds before an alarm event
Mode: Set the recording type: programmed, manually, or o.
• Scheduled recording: You can choose 4 recording times (between 0:00 and 24:00 hours)
and 3 modes (normal recording, motion detection and alarm):
• Regular (normal recording): The device records in the set time. The video le type is ”R”.
• Detect: The device detects motion detection. Video le type is ”M”.
EN
6
• Alarm: The alarm recording function includes: Motion detection, lack of image, loss of video
signal.
• Manual recording: Click the button and the corresponding channel will record regardless of
the current status.
• Stop: Click the button and the corresponding channel will stop recording regardless of the
current status.
Note: The Advanced button opens the following menu: Up Window, Show desktop, Copy, Paste,
Default, Restore the Storage, configuration of the storage unit).
1.1.2 Playback
There are two ways you can play the recorded les on the internal HDD:
- Right click on the screen - Playback
- Right-click on the screen - Main Menu - Record - Playback
Note: The internal HDD you want to play records should be set in read-write mode.
Icon description:
Pause Back
Stop Slow playback
Fast forward Fast backward
Next frame Previous frame
Next le Previous le
Full screen Cyclic play
EN
7
Note: For frame-by-frame playback, the movie will have to pause.
Main functions:
Local Zoom: When the system displays a single channel on the screen, you can select a portion
of the screen with a mouse to enlarge it by clicking the left mouse button. You can then return to
the normal screen by double-clicking.
1.1.3 Backup
NOTE: The USB memory must be installed in the DVR before starting to run the backup. Once
executed, the created backup le can be played back individually.
Detect: detects the USB recording drive connected to the DVR
Erase: format the selected unit
Stop: stops the backup
Backup (Backup Conguration). By pressing this button, the backup conguration screen
appears:
1.2 Alarma
The alarm recording function includes: motion detection, image loss, video loss, abnormalities.
EN
8
1.2.1 Motion detect
When the system detects the move that reaches the set sensitivity threshold then it will start the
recording
Note: The Advanced button opens the following menu: Up Window, Show desktop, Copy, Paste,
Default config, Record config (shortcut to the interface configuration of the recording).
Channel: Choose the channel to be congured
Enable: means that the motion detection function is on
Sensitivity: Choose one of 6 levels of sensitivity
Period: enables motion detection within the specied range. You can set dierent time intervals
depending on the day of the week. Each day is divided into 4 time sections.
EN
9
In case of motion detection, you can choose the warning mode: displays message, sounds,
uploads to FTP server, sends email, saves the event in history.
1.2.2 Video blind
When the video image is inuenced by environmental conditions such as illumination or reaching
the sensitivity threshold, an alarm will be triggered in the system.
Settings are the same as motion detection.
Nota: butonul Advanced deschide urmatorul meniu: Up Window (Inapoi), Show desktop
(afiseaza interfata de previzualizare a canalelor), Copy (copiaza setari), Paste (Lipeste setari),
Default (restabileste setarile implicite), Record config (scurtatura catre interfata de configurare
a inregistrarii).
1.2.3 Video loss
When the equipment does not receive a video signal, an alarm will be triggered in the system.
EN
10
Settings are the same as motion detection.
Note: The Advanced button opens the following menu: Up Window, Show desktop, Copy, Paste,
Default cong, Record cong (shortcut to the interface conguration of the recording).
1.2.4 Abnormality
When an abnormal situation occurs, such as lack of storage, lack of storage space, IP conict or
no network connection, the device will alert you by a message or sound.
1.3 System
The following interface will appear:
Tabla de contenidos
Idiomas:
Otros manuales de DVR de PNI
PNI
PNI House IP716 Manual de usuario
PNI
PNI House H814 Manual de usuario
PNI
PNI House H814LR Manual de usuario
PNI
PNI House IP716LR Manual de usuario
PNI
PNI PTZ720P Manual de usuario
PNI
PNI House AHD880 Manual de usuario
PNI
PNI House 1080p Manual de usuario
PNI
PNI Voyager S2000 Manual de usuario
PNI
PNI HOUSE WIFI660 Manual de usuario
