pleomax MF210 Manual de usuario
HEADSET
MF210
WIRELESS
User Manual
MF210 Headset Ear hook USB Cable 3 dierent size ear bud User manual
(Small, Medium, Large)
ENCLOSURES
HEADSET OVERVIEW
-1- English
Charging Port
Multifunction Button
LED
Volume Button
Microphone
Ear Bud
Speaker
English
HOW TO USE
Before using your headset, charge the battery for at least 2 hours.
Charging the battery completely (and keeping it charged) will help you get
the longest possible talk and standby time out of the battery.
Don’t use if Headset is being charged.
POWER ON/ OFF
Power On : Press MFB for 3 seconds. (Blue LED blinks 3 times)
Power O : Press MFB for 4 seconds. (Blue LED blinks 4 times)
PAIRING
Before you use headset, please pair your headset with mobile phone rst.
1. Please check the Headset is turned o.
2. Press and hold Multi-function button for 5 seconds until blue LED turns on.
3. Search the headset via your phone and please follow the instruction of
your mobile phone.
4. When you nd your headset MF210,
please select it and conrm by“Yes”or“OK”
5. Enter PIN Number ‘0000’(4 zeros).
-2-
Input PIN Code
0000
Active Dev List
Model Name
MF210
4.reference 5.reference
EASY PAIRING: If you use headset for the rst time, headset will go
pairing mode directly.
Low Battery Warning : When Headset needs to charge, you can hear the
warning beep every 30 seconds, unless you don’t charge
within 30 minutes and headset will be power-o.
MAKING A CALL
Make a call from your mobile phone as usual; your phone should
automatically send the call to the headset. If it doesn’t, press and hold MFB
for 2 seconds to manually send the call to the headset.
ANSWERING A CALL
Press the Multi-function button briey to receive a call.
REJECT AN INCOMING CALL
Press and hold MFB for 2 seconds, when you hear a beep, release the button.
You can hear the ring melody for an incoming call. Press the MFB for 2 seconds
until you hear a beep to reject incoming call.
-3- English
ENDING A CALL
Press the MFB during the call or just the ending button on the phone to end
a call.
LAST NUMBER REDIAL
With the phone in standby, press MFB; the headset automatically dials the
last number dialed from the phone.
VOICE DIAL
Press MFB for about 2 seconds until you hear a beep. Voice dialing is activated
on the phone. If you want to cancelVoice dialing, press the MFB for 2 seconds
during the Voice dial mode.
[NOTE] Please make sure that the phone supports the Voice Recognition and save Voice Tag.
TRANSFERRING A CALL
1. From Headset to Phone : To transfer a call, press the MFB on the headset
during the call for 2 seconds until you hear the beep.
2. From Phone to Headset : To transfer a call, press the MFB on the headset
during the call for 2 seconds until you hear the beep.
-4- English
MULTIPOINT : Using the Headset with two phones
[NOTE] Some mobile phones are not available for Multipoint.
1. Multi-point Connect
Set the headset into pairing mode rst.
After then search headset from each mobile phones at the same time.
Please connect rst mobile phone. Once the connection is completed,
please connect the second mobile phones.
[NOTE] Some mobile phones needs to connection process at the same time.
2. Making a call [via the second mobile phone
Press the volume button twice shortly for last call-redialing from the second
mobile phone. Press the volume button for about 2 seconds to activate the
voice dialing of the second mobile phone.
[NOTE] Making a call via the rst mobile phones, please follow the same instruction as described on
“MAKING A CALL”.
3. Receiving a call
Please use the general rule as you receive calls
[NOTE] Each mobile phone plays dierent ring tones.
-5- English
VOLUME CONTROL & MUTE FUNCTION
Press the VOL button. There are 6 volume levels that cycle as you press the VOL
button. When the highest level is reached, the volume level cycles back down
to the lowest.
Press and hold volume down button for 2 seconds, then the MIC will be
muted with the melody every 5 seconds. If you press the volume down button
for 2seconds again, MIC mute will be deactivated.
MULTIPOINT FUNCTION
The Headset supports simultaneous connection with 2 mobile phones with
full control of each unit.
[NOTE] This feature may not be compatible with certain mobile phones.
1. Multi-Point Connect
Set the device into the pairing-mode rst and search the headset
individually from 2 mobile phones. Make sure one mobile phone is
connected properly to the unit before trying the other one.
You can check connection with the mobile phones through beep and
LED ashing.
-6- English
2. Making a phone call [To use the 2nd mobile phone]
Press the Volume button for twice until a beep sound is heard to make
an last number redial from the second mobile phone.
[NOTE] Making a phone call [To use the 1st mobile phone] Follow the same instruction in the
section of‘Making a call’.
3. Receiving a call
Press the Multi-Function button to receive incoming calls.
[NOTE] Each mobile phone plays dierent ring tones. When you are on the line with the mobile
phone, the connection with the other mobile phone will be disconnected. But it will be
automatically re-connected when you terminate the call and keep connection with 2
mobile phones.
RESET
Press the MFB and Volume button for 4 seconds. Then all device information
will be reset. (Please conrm the headset is connectable mode.)
-7-
-8-
STATUS INDICATION
1. LED Indication
Speaker Status LED Indication
Power On Blue LED blinks 3 times
Power O Blue LED blinks 4 times
Pairing Mode Blue LED turns On
Connectable Mode Blue LED blinks 1 time every 5 seconds
Connected Mode Blue LED blinks 2 times every 5 seconds
Active Call Mode Blue LED blinks 3 times every 5 seconds
Charging in Progress Blue LED turns On
Charging Complete Blue LED turns O
2. Tone Indication
Speaker Status Tones Indication
Power On 4 Rising Beep
Power O 4 Falling Beep
Connect 4 Short Beep
Incoming Call Ring melody
Active Call 2 Rising Beep
Ending a Call 2 Falling Beep
Low Battery Low Battery Beep
SPECIFICATIONS
Model Name MF210
Bluetooth Core Spec Bluetooth Specication 2.0
Prole HFP, HSP
Carrier Frequency 2400 MHz to 2483.5 MHz
Modulation Method GFSK, 1Mbps, 0.5BT Gaussian
Maximum Data Rate Asynchronous : 723.2 kbps / 57.6 kbps
Synchronous : 433.9kbps / 433.9 kbps
Bluetooth Class Class 2
Hopping 1600 hops/sec, 1MHz Channel Space
Transmit Power 1 dBm
Coverage Range 10 Meters
Receiver Sensitivity -82 dBm / 0.1 % BER
Continuous Talk Time 5 hours
Standby Time 100 hours
Weight 9g
Dimension 9.65(H) *17.6(W) * 48.8(L) without Speaker
Charging Voltage DC 5.0 V
Charging Time 2 Hours
OperatingTemperature -10° to +50°C
Storage Temperature -20° to +85°C
Battery Lithium Polymer 3.7V 80mH
-9-
Tabla de contenidos
