Plantronics Backbeat Go 2 Manual de usuario

Backbeat®Go 2

plus charge case

User Guide

Contents

Welcome 3

What's in the box 4

Headset overview 5

Charge case overview 6

Pair 7

Get Paired 7

Pair another device 7

Multi-connectivity 7

Charge 9

Check battery level 9

Use charge case 10

Fit 11

The Basics 12

Power the earbuds on or off 12

Audio 12

Adjust the volume 12

Mute 12

Make/Take/End Calls 12

More Features 14

Deepsleep Mode 14

Stay connected 14

Voice alerts 14

Restore factory settings 14

Specifications 15

Congratulations on purchasing your new Plantronics product. This guide contains instructions

for setting up and using your Backbeat Go 2 earbuds.

Please refer to the safety instructions in the quick start guide for important product safety

information prior to installation or use of the product.

Welcome

Earbuds with microphone (stabilizers and medium eartips

installed) AC charger

Eartips (small and large) Charge case

What's in the box

Charge port

Headset indicator light (LED)

Volume up button: Increases volume, skips to next track

Audio/call button: Powers on/off earbuds, answers/ends/declines call, plays/pauses music

Volume down button: Decreases volume, plays previous track

/Mute/Unmute

Headset overview

Micro USB plug

Press for charge case battery level

Micro USB charge port

Charge case indicator lights; indicates charge case battery level and indicates charge

state of earbuds

Charge case overview

The ﬁrst time you power on your earbuds, it begins the pairing process.

1Power on the earbuds. The indicator light, located on the right earbud, flashes red and blue to

indicate pairing mode.

2Activate Bluetooth®on your phone and set it to search for new devices.

•iPhone* Settings > General > Bluetooth > On

•Android™Smartphones* Settings > Wireless & Networks > Bluetooth: On > Scan for devices

NOTE * Menus may vary by device.

3Select “PLT_BBTGO2.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the earbud indicator light stops

flashing.

NOTE To enter pairing mode after the first pairing process, start with the earbuds powered off and

then press and hold the Audio/call button until you hear "pairing."

After pairing your earbuds to your phone, you may want to pair another phone or device, such

as a tablet. You can pair and remember up to eight devices, supporting Handsfree and Advanced

Audio Distribution (A2DP) profiles.

1Put the earbuds in pairing mode. Choose:

• With the earbuds powered off, press and hold the Audio/call button until you hear "pairing" or

• With the earbuds powered on and not during a call, press and hold the volume up (+) and

volume down (–) buttons until you hear "pairing"

The indicator light , on the right earbud, flashes red and blue to indicate pairing mode.

2Activate Bluetooth on your phone and set it to search for new devices.

3Select “PLT_BBTGO2.”

If necessary, enter four zeros (0000) for the passcode or accept the connection.

Once successfully paired, you hear “pairing successful” and the headset indicator lights stop

flashing.

When you have more than one device paired to your earbuds, multi-connectivity allows you to

toggle the connection between the devices from the Bluetooth device list of your phone/music

device (The earbuds can only be connected to one device at a time.).

For example, if you are connected to a tablet and are finished listening to music and want to

switch to one of your other paired phone/music devices, then do the following:

1Go to the paired device list in your Bluetooth settings menu on your phone.

2Select "PLT_BBTGO2."

Pair

Get Paired

Pair another device

Multi-connectivity

After, the earbuds accept the new connection, there is no need to delete and re-pair your

devices each time; they are remembered and ready to connect anytime when in range.

Your new earbuds have enough power to pair and make a few calls. To access the charging

port, insert your fingernail into the groove on top of the right earbud and pull down.

It takes up to 2.5 hours to fully charge the earbuds. While charging, the indicator light is red

and turns blue once charging is complete.

You can check the battery level by tapping either of the Volume buttons when the headset is

idle. Your earbuds announce battery status and the indicator light flashes to show the charge

level.

"Battery level high" = battery OK to fully charged

"Battery level low" = less than 1 hour remaining

"Recharge headset" = under 15 minutes remaining

Blue ﬂash = battery OK to fully charged

Double red flash = battery low, less than 1 hour remaining

Triple red flash = under 15 minutes remaining

Charge

Check battery level

With a fully charged case, charge your earbudsfor 20 minutes to add up to anhour of power.

Charge the earbudsfor 2.5 hoursfor a full charge.

You can check charge case battery level by pressing the Battery status button .

Charge case indicator light

Battery high

Battery medium

Battery low

Battery critical

Earbud indicatorlight

Flasheswhite every 10 seconds to indicate charging; stops ﬂashing when fully charged

Use charge case

Otros manuales para Backbeat Go 2

Tabla de contenidos

Otros manuales de Auriculares de Plantronics

Plantronics

Plantronics DISCOVERY 925 Manual de usuario

Plantronics

Plantronics Stereo SupraPlus USB Guía de referencia

Plantronics

Plantronics Backbeat FIT Manual de usuario

Plantronics

Plantronics .Audio 990 Manual de usuario

Plantronics

Plantronics BLACKWIRE C210-M Manual de usuario

Plantronics

Plantronics BackBeat SENSE Manual de usuario

Plantronics

Plantronics Backbeat FIT Manual de usuario

Plantronics

Plantronics BackBeat Pro Manual de usuario

Plantronics

Plantronics Voyager PRO UC v2 Manual de usuario

Plantronics

Plantronics CS60-USB DECT Manual de usuario

Plantronics

Plantronics BackBeat FIT 350 Series Manual de usuario

Plantronics

Plantronics Poly Voyager FREE 60 Manual de usuario

Plantronics

Plantronics CS70 Series Guía de referencia

Plantronics

Plantronics Marque 2 M165 Manual de usuario

Plantronics

Plantronics BackBeat 903 Manual de usuario

Plantronics

Plantronics RIG 500 PRO Series Manual de usuario

Plantronics

Plantronics Bluetooth Headset none Manual de usuario

Plantronics

Plantronics BackBeat FIT 3100 Series Manual de usuario

Plantronics

Plantronics BackBeat 500 SERIES Manual de usuario

Plantronics

Plantronics Blackwire C420-M Manual de usuario

Plantronics

Plantronics Backbeat Go 2 Manual de usuario

Plantronics

Plantronics Backbeat FIT Manual de usuario

Plantronics

Plantronics BackBeat 903+ Manual de usuario

Plantronics

Plantronics BackBeat GO 600 Manual de usuario

Manuales populares de Auriculares de otras marcas

Sony

Sony MDR-NC8 Manual de usuario

AUSounds

AUSounds AU-Stream Manual de usuario

ENERGY SISTEM

ENERGY SISTEM Style 7 Manual de usuario

Philips

Philips SHE3622 Manual de usuario

Insignia

Insignia NS-CAHBTSPORT Manual de usuario

Movie Vision

Movie Vision HP-400 Manual de usuario

MobiFren

MobiFren SM Pro Manual de usuario

Motorola solutions

Motorola solutions PMLN8120 Manual de usuario

Jaybird

Jaybird freedom Guía de instalación

Sony

Sony MDR-ED12LP Manual de usuario

HiFuture

HiFuture Tidy Buds Pro Manual de usuario

Creative

Creative CB2530 Manual de usuario

Renkforce

Renkforce RF FTVK-100 Manual de usuario

Philips

Philips SHQ3000 Manual de usuario

Sennheiser

Sennheiser 500371 Manual de usuario

Califone

Califone 2924AV Manual de usuario

Philips

Philips EARGEAR HE205 Series Manual de usuario

Technics

Technics EAH-AZ80 Manual de usuario