Planet Networking & Communication ICS-2100T Manual de usuario
User’s Manual of ICS-2x00T Serial Device Server Series
1
RS232/RS422/RS485
Industrial Serial Device Server
ICS-2100T / ICS-2105AT/
ICS-2102T / ICS-2102TS/
ICS-2200T / ICS-2400T
User’s Manual of ICS-2x00T Serial Device Server Series
2
Trademarks
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no
warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for
a particular purpose. PLANET has made every effort to ensure that this User's Manual is accurate; PLANET disclaims liability
for any inaccuracies or omissions that may have occurred.
Information in this User's Manual is subject to change without notice and does not represent a commitment on the part of
PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User's Manual. PLANET makes
no commitment to update or keep current the information in this User's Manual, and reserves the right to make improvements to
this User's Manual and/or to the products described in this User's Manual, at any time without notice.
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and
suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a r esidential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CE Mark Warning
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio
interference.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy saving, please remove the power cable to
disconnect the device from the power circuit. In view of saving the energy and reducing the unnecessary power consumption, it
is strongly suggested to remove the power connection for the device if this device is not intended to be active.
WEEE Warning
To avoid the potential effects on t he environment and hu man health as a r esult of the presence of
hazardous substances in electrical and electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of
WEEE as unsorted municipal waste and have to collect such WEEE separately.
Revision
PLANET ICS-2x00T Series User's Manual
Model:ICS-2100T / ICS-2105AT/ ICS-2200T / ICS-2400T
Revision: 1.0 (Auguest, 2020)
Part No: EM-ICS -2x00T_v1.1
User’s Manual of ICS-2x00T Serial Device Server Series
3
TABLE OF CONTENTS
1. INTRODUCTION .................................................................................................................... 5
1.1 Packet Contents ............................................................................................................................................. 5
1.2 Product Description ........................................................................................................................................ 6
1.3 How to Use This Manual .............................................................................................................................. 10
1.4 Product Features .......................................................................................................................................... 11
1.5 Product Specifications .................................................................................................................................. 13
2. INSTALLATION ................................................................................................................... 16
2.1 Hardware Description ................................................................................................................................... 16
2.1.1 Front Panel .......................................................................................................................................................... 16
2.1.2 Front Panel .......................................................................................................................................................... 18
2.1.3 LED Indications ................................................................................................................................................... 19
2.1.4 Wiring the Power Inputs....................................................................................................................................... 20
2.1.5 Serial Port Pin Define .......................................................................................................................................... 21
2.2 Installing the Industrial Serial Server ............................................................................................................ 22
2.2.1 Installation Steps ................................................................................................................................................. 22
2.2.2 DIN-rail Mounting ................................................................................................................................................. 23
2.2.3 Wall Mount Plate Mounting .................................................................................................................................. 25
3. INDUSTRIAL SERIAL SERVER MANAGEMENT ............................................................... 26
3.1 Requirements ............................................................................................................................................... 26
3.2 Web Management ........................................................................................................................................ 27
3.2.1 Logging in to the Industrial Serial Server ............................................................................................................. 27
3.3 Remote Management ................................................................................................................................... 29
3.4 PLANET Smart Discovery Utility .................................................................................................................. 30
4. WEB CONFIGURATION ...................................................................................................... 32
4.1 Main Web Page ............................................................................................................................................ 35
4.2 System .......................................................................................................................................................... 36
4.2.1 System................................................................................................................................................................. 36
4.2.2 Port ...................................................................................................................................................................... 38
4.2.3 Device.................................................................................................................................................................. 39
4.2.4 Time ..................................................................................................................................................................... 39
4.2.5 Console ............................................................................................................................................................... 40
4.2.6 Fault Alarm .......................................................................................................................................................... 40
4.2.7 Digital Input and Output ....................................................................................................................................... 41
User’s Manual of ICS-2x00T Serial Device Server Series
4
4.3 Accessible IP ................................................................................................................................................ 42
4.4 Network ........................................................................................................................................................ 43
4.5 Port Config.................................................................................................................................................... 45
4.5.1 Serial setup .......................................................................................................................................................... 46
4.5.2 Operation mode ................................................................................................................................................... 47
4.5.2.1 Disable mode ............................................................................................................................................ 47
4.5.2.2 Remote Pair Master/Slave mode ............................................................................................................... 48
4.5.2.3 RF2217 mode ............................................................................................................................................ 50
4.5.2.4 Serial Telnet mode ..................................................................................................................................... 51
4.5.2.5 TCP Server mode ...................................................................................................................................... 54
4.5.2.6 TCP Client mode ....................................................................................................................................... 57
4.5.2.7 UDP mode ................................................................................................................................................. 59
4.5.2.8 Virtual COM mode ..................................................................................................................................... 61
4.5.2.9 Modbus Converter Server mode ............................................................................................................... 64
4.5.2.10 Modbus Converter Client mode ............................................................................................................... 66
4.6 SNMP Setup ................................................................................................................................................. 68
4.7 Maintenance ................................................................................................................................................. 69
4.7.1 Change Password ............................................................................................................................................... 69
4.7.2 Load Default ........................................................................................................................................................ 69
4.7.3 Firmware Update ................................................................................................................................................. 70
4.8 Save and Restart .......................................................................................................................................... 71
5. SOFTWARE VCOM UTILITY ............................................................................................... 72
5.1 Installing the VCOM Utility ............................................................................................................................ 72
5.2 Search Devices ............................................................................................................................................ 74
5.3 Virtual COM .................................................................................................................................................. 75
User’s Manual of ICS-2x00T Serial Device Server Series
5
1. INTRODUCTION
Thank you for purchasing PLANET ICS-2100T Industrial Serial Device Server series. “Industrial Serial Server” is used as an
alternative name in this Quick Installation Guide.
ICS-2100T IP30 Industrial 1-Port RS232/RS422/RS485 Serial Device Server (1 x 10/100TX, -40~75 degrees C)
ICS-2102T IP30 Industrial 1-Port RS232/RS422/RS485 Serial Device Server (1 x 100FX SC, 2km, -40~75 degrees C)
ICS-2102TS IP30 Industrial 1-Port RS232/RS422/RS485 Serial Device Server (1 x 100FX SC, 30km, -40~75 degrees C)
ICS-2105AT IP30 Industrial 1-Port RS232/RS422/RS485 Serial Device Server (1 x 100FX SFP, -40~75 degrees C)
ICS-2200T Industrial 2-Port RS232/RS422/RS485 Serial Device Server
ICS-2400T Industrial 4-Port RS232/RS422/RS485 Serial Device Server
“Industrial Serial Server” mentioned in this Guide refers to the above models
1.1 Packet Contents
Open the box of the Industrial Serial Server and carefully unpack it. The box should contain the following items:
The Industrial Serial Server x 1
User’s Manual x 1
Wall Mounting Kit x 1
Dust Cap (RJ45 / SFP)
DIN-rail Bracket w/Screws x 1
If any of these are missing or damaged, please contact your dealer immediately; if possible, retain the carton including the
original packing material, and use them again to repack the product in case there is a need to return it to us for repair.
User’s Manual of ICS-2x00T Serial Device Server Series
6
1.2 Product Description
Cost-effective Solution for RS232/422/485 Serial-to-Industrial Ethernet Application
PLANET ICS-2x00T Serial Device Server series is specially designed to convert RS232, RS422 or RS485 serial communication
to Industrial Fast Ethernet networking so as to extend the network distance efficiently and inexpensively. There are one/two
10/100BASE-TX RJ45 ports available in the ICS-2x00T series for your network needs. The ICS-2x00T series is a time-saving
and cost-effective solution for users and system integrators to quickly transform their serial devices into the Ethernet network
with no need of replacing the existing serial devices and software system.
User’s Manual of ICS-2x00T Serial Device Server Series
7
Remote Management
As the ICS-2x00T series provides an e asy serial-to-Ethernet connectivity and connection to a T CP/IP network, the remote
network system can thus be managed efficiently via its Web, Telnet and VCOM management interfaces. It supports both
application and serial operation modes for alarm or IP address connection, which saves the network administrator’s time in
detecting and locating network problems without visual inspection of the cabling and devices. Multiple connection options are
available for large networking environment as well.
Stable Performance under Difficult Environments
The ICS-2x00T series provides a high level of immunity against electromagnetic interference and heavy electrical surges which
are usually found on plant floors or in curbside traffic control cabinets. Its operating temperature ranging from -40 to 75 degrees
C allows the ICS-2x00T series to be placed in almost any difficult environment.
The ICS-2x00T series with the compact IP30-/IP40-rated metal case allows either DIN-rail or wall mounting for efficient use of
cabinet space. The ICS-2x00T series also provides an integrated power supply source with a wide range of voltages (12 to 48V
DC) ideally suitable for worldwide operation with high availability applications requiring dual or backup power inputs.
User’s Manual of ICS-2x00T Serial Device Server Series
8
Dual Power Input for High Availability Network System
The ICS-2x00T series features a strong dual power input system with wide-ranging voltages (12V~48V DC or 9 to 48V DC / 24V
AC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when
Power Supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the ICS-2x00T
series via Power Supply 2 without any break of operation.
User’s Manual of ICS-2x00T Serial Device Server Series
9
Effective Alarm Alert for Better Protection
The ICS-2x00T series comes with a Fault Alarm feature which can alert the users when there is something wrong with the Serial
Device Server. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save
time and human resource. The ICS-2x00T series provides event alert function to help to diagnose the abnormal device owing to
whether or not there is a break of the network connection, or the rebooting response.
Digital Input and Digital Output for External Alarm (ICS-2400T only)
With digital input and digital output on its front panel, an external alarm can help users via the digital input to detect and log
external device status (such as door intrusion detector), and then immediately send an event alarm to the administrator. The
digital output can be used to alarm the administrator if the ICS-2400T serial port shows connection failure or power failure.
User’s Manual of ICS-2x00T Serial Device Server Series
10
1.3 How to Use This Manual
This User’s Manual is structured as follows:
Section 2, INSTALLATION
It explains the functions of the ICS-2X00T and how to physically install the ICS-2X00T.
Section 3, INDUSTRIAL SERIAL SERVER MANAGEMENT
The chapter explains how to manage the ICS-2X00T in different ways.
Section 4, WEB CONFIGURATION
It describes how to configure by web interface.
Section 5, SOFTWARE VCOM UTILITY
It describes how to use software VCOM in the Virtual COM mode.
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Servidor de Planet Networking & Communication
Planet Networking & Communication
Planet Networking & Communication ICS-110 Manual de usuario
Planet Networking & Communication
Planet Networking & Communication Serial Device Server Series Manual de usuario
Planet Networking & Communication
Planet Networking & Communication IVS-2120 Manual de usuario
Planet Networking & Communication
Planet Networking & Communication ICS-2Serie Manual de usuario
Planet Networking & Communication
Planet Networking & Communication IAS-2400 Manual de usuario
