Planet Audio PATV65 Manual de usuario
BLUETOOTH®ENABLED
ALL-TERRAIN SOUND SYSTEM
PATV65
USER MANUAL
QUICK INSTALLATION GUIDE
Flat Subwoofer
PX12
2012
PATV65
USER MANUAL
QUICK INSTALLATION GUIDE
BLUETOOTH®ENABLED ALL-TERRAIN SOUND SYSTEM
PRINTED IN CHINA
VER:1.0 EN
iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries.
PLANET AUDIO is not aliated with Apple Inc.
Specications subject to change without prior notice.
815
Flat Subwoofer
PX12
2012
www.planetaudiousa.com/technical-support
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or
by any means, including photocopying, recording, or other electronic or mechanical methods, without the
prior written permission of PLANET AUDIO.
Copyright © 2015 PLANET AUDIO
BEFORE YOU START----------------------------------------------------------------- 2
IMPORTANT SAFETY PRECAUTIONS
INSTALLATION PRECAUTIONS
WIRE DIAGRAM ------------------------------------------------------------------------ 3
SPEAKER MOUNTING SUGGESTIONS --------------------------------------- 3
BEFORE INSTALLING THIS PRODUCT --------------------------------------- 4
TECHNICAL SUPPORT
SUGGESTED MOUNTING METHODS ------------------------------------------ 5
SURFACE MOUNT
HANDLEBAR MOUNT
GETTING STARTED------------------------------------------------------------------- 6
BLUETOOTH OPERATION---------------------------------------------------------- 7
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
RECONNECTION
STREAMING MUSIC------------------------------------------------------------------- 9
MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION
VOLUME CONTROL
AUX-INPUT ----------------------------------------------------------------------------- 10
AUX-IN OPERATION
VOLUME CONTROL
INFORMATION TO THE USER -------------------------------------------------- 11
TROUBLE SHOOTING GUIDE--------------------------------------------------- 12
SPECIFICATIONS -------------------------------------------------------------------- 12
TABLE OF CONTENTS
THIS PACKAGE CONTAINS
1 - PATV65 All-Terrain Speaker System
1 - Bluetooth Multi-Function Controller
1 - Handlebar Mounting Kit
1 - Quick Connect Power Extension Adaptor
4 - Hi-strength Nylon Mounting Straps
1 - User Manual
1 - Warranty Card
Thank you for purchasing this
PATV65 Bluetooth All-Terrain Sound System
Please read through these instructions carefully so you will know how to
operate your model properly.
After you have nished reading the instructions, keep this document in a
safe place for future reference.
All trademarks and trade names are those of their respective owners.
USER MANUAL
QUICK START GUIDE
WARRANTY
CARD
2
ENGLISH
BEFORE YOU START
IMPORTANT SAFETY PRECAUTIONS
■ BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
- Do not turn up the volume so high that you can’t hear what’s around you.
- Use caution or temporarily discontinue use in potentially hazardous situations.
■ Do not operate mobile video equipment while driving a motorized vehicle – safe
driving and safety consideration of others should always be your highest priority.
■ Set your volume control at a low setting, then slowly increase the sound until you
can hear it comfortably without distortion, or ear discomfort.
■ In the event you should notice smoke, strange noises or odor from this
product, or any other abnormal signs, immediately turn o the power and consult
your dealer or the nearest authorized PLANET AUDIO Service Center. Using this
product in this condition may result in permanent damage to the system.
INSTALLATION PRECAUTIONS
WARNING - Always consult with a professional installer
■ Do not attempt to install or service this product by yourself. Installation or
servicing of this product by persons without professional training and experience in
electronic equipment and motorized vehicle accessories may be dangerous and
could expose you to the risk of electric shock, injury or other hazards
■ Refer any repairs to a qualied PLANET AUDIO Service Center
■ The PATV65 should be powered directly to a vehicles battery
■ When wiring directly to the vehicles battery, be sure to disconnect the batteries
negative terminal wire before starting any wiring procedures,if extending the main
power wire, it is suggested that an optional fuse and fuse holder (not included) with
minimum rating of 20 Amperes be in-line with the positive battery terminal
■ The ground cable length should not exceed 18-inches (See wiring diagram pg 4)
■ The PATV65 has a weather resistant design, it should not be submerged in or
under water under any circumstances
■ Use only the installation parts provided with the PATV65
CAUTION!! Using other mounting methods may void this warranty
3
ENGLISH
WIRE DIAGRAM
20A
Fuse and fuse holder
(not included)
Chassis
ground
point
BATTERY
Fuse is located inside the power adaptor
Turn counter clockwise to open
Replace with
15A AGC Fuse type only
Normally open switch
(not included)
INSERT
OPTIONAL DIRECT BATTERY WIRING CIRCUIT
RED
BLACK
Chassis
ground
point
QUICK RELEASE
POWER ADAPTOR
(INCLUDED)
POWER ADAPTOR
15A
Ground wire
Metal frame
Recommended 12 ~ 14ga Wire
(not included)
Mini-DIN
Connector
INSERT
MFC
Align arrows
INSERT
Your cable
3.5mm to 3.5mm
(not included)
SPEAKER MOUNTING SUGGESTIONS
Route strap
through the hole
and to vehicle
frame
Route strap
around the speaker body to vehicle frame
Route strap
through the hole
and to vehicle
frame
CAUTION!!
Mounting straps should be double checked to be sure they are
pulled tight and secure before each use of the vehicle.
Tips:
EN
Nyne Cruiser
USB CHARGE
5V 1A
Tips:
EN
Nyne Cruiser
USB CHARGE
5V 1A
4
ENGLISH
BEFORE INSTALLING THIS PRODUCT
When replacing the fuse, be sure to only use a fuse of the
rating specied on this product.
To avoid short-circuiting, cover any disconnected leads with insulating tape. It is
especially important to insulate any unused wires, which if left uncovered may
cause a short circuit. When connecting other devices to this product, refer to the
manual for the product to be connected. The black cable is ground, make sure to
connect the ground wire rst.
Ensure that the ground cable is properly connected to metal parts of the vehicles
body frame or direct to the battery if your vehicle does not have a grounded
chassis frame The ground cable of this units power amp and a second powered
system must be connected to the frame separately with dierent screws. If the
screw for the ground wire loosens or falls out, it could result in re or malfunction.
To avoid potential shorts in the
electrical system, be sure to disconnect
the (–) battery cable before installation.
Use this unit with a 12-volt battery and
negative grounding only. Failure to do so
may result in a re or malfunction.
TOOLS NEEDED:
- Wrench and/or Pliers
- #2 Phillips screwdriver
- Crimp tool
- Electrical tape
TECHNICAL SUPPORT
1.805.751.4854
www.planetaudiousa.com/technical-support
5
ENGLISH
To surface mount use double
sided tape or velcro.
(not included)
Use the provided handelbar
clamp kit, try the best method
for your application, securely
tighten all components.
SUGGESTED MOUNTING METHODS
LEFT CENTER RIGHT
FOR ILLUSTRATION PURPOSES
YOUR VEHICLE MAY VARY
MULTI-FUNCTION
CONTROLLER
UNIT
HANDLEBAR
CLAMP
SLOT
RUBBER
SHIM
WASHER
LOCK NUT
ALLEN HEAD
LOCK NUT
ALLEN HEAD
BOLT
SNAP
BRACKET
Z-BRACKET
HANDLEBAR
CLAMP
BOLT
SURFACE MOUNT
2
1
To release the PATV65 controller from the mounting clamp, insert
a small jewellers screwdriver into the release tab.
Tips:
EN
Nyne Cruiser
USB CHARGE
5V 1A
The PATV65 can be mounted in two dierent congurations:
HANDLEBAR MOUNT
6
ENGLISH
GETTING TO KNOW YOUR
PATV65 MULTIFUNCTION CONTROLLER (MFC)
GETTING STARTED
A
1
2
3
4
5
6
7
8
9
10
1
4
6
52
3
A
MFC - MULTIFUNCTION CONTROLLER
VOLUME DOWN
VOLUME UP
LED DRIVING LAMP - ON/OFF
PLAY/PAUSE
NEXT TRACK
PREVIOUS TRACK
SYSTEM POWER - ON/OFF
POWER / SOURCE - RED = AUX-IN MODE / BLUE = BT MODE
BLUETOOTH PAIRING INDICATOR - BLUE COLOR
3.5mm AUX INPUT
10
7
89
7
ENGLISH
PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION
1) Power on the PATV65 by pressing and holding down the 7Power button for
3 seconds, the 9BLUE and 8RED LEDs will start to alternately ash,
signalling that the PATV65 is now ready for Bluetooth pairing.
NOTE: You have 2 minutes before you must restart this procedure over again.
2) Now that the PATV65 is in pairing mode:
ANDROID users:
a. Go into the Settings Menu of your device
b. Enter the Bluetooth Menu and press SCAN
c. “Planet Audio” will now be display under AVAILABLE DEVICES
d. If prompted, enter passcode: “0000”
iOS users:
a. Go into the Settings Menu of your iOS device
b. Enter the Bluetooth Menu
c. “Planet Audio” will now be displayed
d. If prompted, enter passcode: “0000”
3) If Planet Audio is not seen, repeat the above steps to refresh the “Device List”
4) When the connection is successful the BLUE LED will be ON, you are now ready to
stream music from your devices favorite media player to the PATV65
BLUETOOTH OPERATION
7
Tips:
EN
Nyne Cruiser
USB CHARGE
5V 1A
Tips:
EN
Nyne Cruiser
USB CHARGE
5V 1A
89
Tabla de contenidos
