Pixio PXC325 Manual de usuario
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance. The contents of this manual are subject to change without notice to improve quality.
Copyright © 2021 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc. I All Rights Reserved.
Use or reproduction of this manual in parts or entirety without the authorization of Pixio USA Inc is prohibited.
All other trademarks are owned by their respective owners.
PXC325
31.5in FHD VA 165Hz Gaming Monitor
PXC325
RISK OF ELECTRIC SHOCK DO NOT OPEN THE MONITOR.
OPENING MONITOR BACK COVER WILL VOID YOUR WARRANTY.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of
this product.
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.
Before Using the Product.
Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight
for an extended period of time.
Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging
material will be the best method for successful delivery.
Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents
to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
Always check to make sure the power cord is unplugged before cleaning the monitor.
Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components
in the monitor.
Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product.
Make sure to allow some space. Do not install near heater or any other high temperature product or humidifier.
Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries.
When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging
for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider
for best results.
The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up.
Avoid confined spaces like a bookcase for proper functionality.
If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk
of damage from lighting strikes or other abnormal voltage incidents.
Do not overburden any socket to prevent risk of fire or shock.
Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the
warranty as well. Contract Pixio directly for all RMA issues.
Take note of elevation and temperature zone warnings on the adapters.
The icon indicates that the adapter is suited for areas under 2000 meters.
The icon indicates that the adapter is suited for non-tropical areas.
Take the following steps when cleaning.
1 Power off the product and computer.
2 Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
may result.
3 Wipe the monitor with a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5 Connect the power cord to the product when cleaning is finished.
6 Power on the product and computer.
Cleaning the Product.
Notice.
Product Includes:
Preparation.
Product Assembly:
1. Assemble the base to the stand with sets of M4 x 16mm screws as pictured.
Caution: Please do not put the monitor directly on a flat surface or press down on the monitor.
There is a risk of damaging the monitor.
Tabla de contenidos
Otros manuales de Monitor de Pixio
Pixio
Pixio PX275C Prime Manual de usuario
Pixio
Pixio PX274 Prime Manual de usuario
Pixio
Pixio PX160 Manual de usuario
Pixio
Pixio PX277 Prime Manual de usuario
Pixio
Pixio PX243 Manual de usuario
Pixio
Pixio PXC348C Manual de usuario
Pixio
Pixio PX259 Prime S Manual de usuario
Pixio
Pixio PX222 Manual de usuario
Pixio
Pixio PX347c Prime Manual de usuario
Pixio
Pixio PX347c Prime Manual de usuario
Pixio
Pixio PX7 PRIME Manual de usuario
Pixio
Pixio PX5 HAYABUSA Series Manual de usuario
Pixio
Pixio PXC243 Manual de usuario
Pixio
Pixio PXC279 Manual de usuario
Pixio
Pixio PX325c Manual de usuario
Pixio
Pixio PXC277 Manual de usuario
Pixio
Pixio PXC277A Manual de usuario
Pixio
Pixio PX275h Manual de usuario
Pixio
Pixio PX248 PRO Manual de usuario
Pixio
Pixio PXC327A Manual de usuario
