Pitsco Education FLO Manual de usuario

42292 V0116

FLO

Visualization Tunnel

User Guide

Cautionary and Warning Statements

• This unit is designed and intended for educational purposes only.

• Use only under the direct supervision of an adult who has read and understood the instructions provided

in this user guide.

• Read warnings on packaging and in manual carefully.

• Safety glasses are required.

• Always exercise caution when using sharp tools.

2FLO Visualization Tunnel User Guide 42292 V0116

Hazardous Chemical Warning

The included 50 ml bottle of fog uid contains hazardous chemicals.

• DO NOT SWALLOW – This may cause lung damage if swallowed.

• Eye contact – Flush eyes with large amounts of water until irritation subsides. If irritation persists, get

medical attention.

• Skin contact – Flush with large amounts of water; use soap if available. Repeated exposure may cause skin

dryness or cracking.

• Inhalation – Use in a well-ventilated area when generating smoke from uid. If smoke causes irritation,

remove individual from area.

• Ingestion – If swallowed, do not induce vomiting. Keep at rest. Get prompt medical attention.

Materials Included

• 1 control box

• 1 fog generator

• 6 magnetic base mounts

• 3 dowel rods (1/8" x 18")

• 1 bottle of fog uid (50 ml)

• 2 syringes

• 1 foam airfoil

• 1 power supply (12 V)

• 2 adapter cords

• 1 FLO Visualization Tunnel

Items Required (not included)

• Scissors • Glue

Filling the Fog Generator

1. Fill a syringe with 0.5 ml of the fog uid (Figure 1).

2. Empty the uid into the black-and-gold hole at the top of the fog

generator (Figure 2). Note: Do not press on the heating element

in the middle of the hole. You could damage the heating element.

3. Place the nozzle on the fog generator (Figure 3).

Figure 1

Figure 2 Figure 3

3FLO Visualization Tunnel User Guide 42292 V0116

Setting up the FLO Tunnel

1. Plug the 12 V power supply into the control box (Figure 4).

2. Plug both adapter cords into the control box in the corresponding color slots and run the wires to the FLO

Tunnel and fog generator (Figure 5).

Using the FLO Tunnel

Note: The FLO Tunnel comes with three 18" dowel rods that can be cut to your desired length for testing.

Find an object you want to test, insert a dowel rod into it, cut the dowel rod to an appropriate length to t in

the FLO Tunnel, and insert the dowel rod into a magnetic base mount.

1. Pull the right side of the FLO Tunnel out (Figure 6). Take out the circle platform in the bottom of the FLO

Tunnel (Figure 7).

2. Place the object you want to test on a dowel rod and insert the dowel rod into a magnetic base mount (Figure 8).

3. Attach the magnetic base mount onto the circle platform and place the platform back into the FLO Tunnel

(Figure 9).

Figure 4

Figure 6

Figure 8

Figure 7

Figure 9

Figure 5

P.O. Box 1708 • Pittsburg, KS 66762

www.pitsco.com

Toll-Free Orders 800-835-0686

4. Push the On button for the FLO Tunnel and fog generator on the control box. Place the nozzle of the fog

generator on the right side of the FLO Tunnel and press the On button on the fog generator. Test the ow

of the air around the object by rotating the gear on the right side of the FLO Tunnel (Figures 10 and 11).

Change the wind speed of the FLO Tunnel by twisting the knob in the middle of the control box (Figure 12).

Note: Other items such as model cars, model airplanes, and geometric shapes can be tested in the FLO

Tunnel. The geometric shapes can be placed on the rotating platform to simulate a building layout and

rotated to show the ow of air around structures.

Figure 10 Figure 11

Figure 12

Tabla de contenidos

Otros manuales de Equipos educativos de Pitsco Education

Pitsco Education

Pitsco Education Wind Gen Plus Kit Manual de usuario

Pitsco Education

Pitsco Education TETRIX MAX R/C Motor Controller Manual de usuario

Pitsco Education

Pitsco Education R2K Rocket Kit Manual de usuario

Pitsco Education

Pitsco Education BUILDERSPACES SPACEPORT Manual de usuario

Pitsco Education

Pitsco Education TETRIX MAX Manual de usuario

Pitsco Education

Pitsco Education Wheel Lathe Manual de usuario

Pitsco Education

Pitsco Education DRONE ARENA Manual de usuario

Pitsco Education

Pitsco Education Desk Jockey Manual de usuario

Manuales populares de Equipos educativos de otras marcas

DISCOVER

DISCOVER talking pen Manual de usuario

pitsco

pitsco Smart Buddies 45895 Manual de usuario

RS 3.5 Manual de usuario

Quanser

Quanser QNET 2.0 Manual de usuario

CAE Healthcare

CAE Healthcare METIman Manual de usuario

Turning Technologies

Turning Technologies Pulse Manual de usuario

fischertechnik

fischertechnik STEM Coding Pro Manual de usuario

Experia

Experia IRiS Light Wand Manual de usuario

Sphero

Sphero RVR RV01 Manual de usuario

Limbs & Things

Limbs & Things 60905 Manual de usuario

JP TURN Connect T101 Manual de usuario

TruCorp

TruCorp AirSim Advance Manual de usuario

LeapFrog

LeapFrog Mr. Pencil's Scribble, Write & Read Manual de usuario

ScienTECH

ScienTECH 2261 Manual de usuario

Rompa

Rompa 20019 Manual de usuario

Duinotech

Duinotech XC4322 Manual de usuario

Enabling Devices

Enabling Devices Spinning Light Show Manual de usuario

Adam,Rouilly

Adam,Rouilly AR253 Manual de usuario