Pipishell PISL2 Manual de usuario

Installation Instructions V1.0

PISL2

Thank you for choosing our product! We strive to provide the best

quality and services for our customers. Would you kindly share your

experience on Amazon if you are satisﬁed? Should you have any

issues, please don't hesitate to contact us.

Telephone：800-556-9829 Mon-Fri 10am - 6pm (PST) (USA) (CAN)

Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)

Supplied Parts

Tools Needed (Not lncluded)

Stud Finder Tape measure Pencil Drill

Wood Drill Concrete Drill socket wrench Screwdriver

Hammer

IMPORTANT SAFETY INFORMATION

•Check package contents against Supplied Parts and Hardware Lists to assure that all

components were received undamaged. Do not use damaged or defective parts.lf you

require replacement parts, contact customer service at [email protected]

•Not all parts and hardware included will be used.

•Carefully read all instructions before attempting installation.If you do not understand

the instructions or have any concerns or questions, please contact customer service at

[email protected]

•This product may contain moving parts. Use with caution.

•Do not use this product for any purpose or in any conﬁguration not explicitly speciﬁed

in this instruction. We hereby disclaim any liability for injury or damage arising from

incorrect assembly, incorrect mounting, or incorrect use of this product.

•DO NOT INSTALL INTO DRYWALL ALONE.

Wall Plate 01 x1 02 x2

level

TV Brackets

Supplied Hardware

Hardware for Attaching Wall Plate to Wall

Lag Bolts

M6X50

x4 x4

These anchors are for concrete or

brick walls ONLY. DO NOT use them in

drywall or wood studs.

CAUTION!

Wall Anchor

Hardware for Attaching TV Bracket to TV

x4 x4

TV Screws

M6X16mm M6X30mm

x4 x4

M8 x 25mm

10mm2.5mm

5mm

03 04

M4X16mm M4X30mm

x4 x4

Washers

Spacers

Step 1 Select TV Screws

Step 2 Select Spacers (If Needed)

For Rounded TV

For Flat TV with:

Inset Holes Cable Interference

aLong Screw

Short Screw

Washer

Spacer

TV Bracket

EXTRA

NO SPACER bSPACER

For Flat TV

Spacer not necessary

SPACE

Only one screw size ﬁts your TV.

M6M4 M8

Too Short Too Long

● Avoid potential personal injury or property damage! DO NOT

over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until they

are pulled ﬁrmly against the wall plate

[01]

Step 4

Step

For wood stud installation, follow STEP 4A

For concrete installation, follow STEP 4B

Attach Wall Plate to Wall

Wood Stud Option

WARNING:

● Ensure the wall plate is securely fastened to the

wall before continuing on to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum

1½ x 3½ in. (38 x 89 mm)

● Stud center must be veriﬁed

With Spacer

No Spacer

Alternate

Spacer

setups

05 05

Secure the TV Brackets to Your TV

Step 3

4A-2

4A-1

4A-4

Socket Wrench

Position the wall plate at

your desired height and

line up the holes with your

stud center line. Level the

wall plate and mark the

holes.

4A-3

ø4mm

50mm

Drill 4 pilot holes using a 4

mm diameter drill bit. Make

sure the depth is not less

than 50mm.

Install the wall plate

[01]

using lag

bolts [A1] . Tighten the lag bolts

[A1] only until they are pulled

ﬁrmly against the wall plate.

Use a stud ﬁnder(not

included)to locate wood

studs. Mark the edge and

center locations.

● Avoid potential personal injury or property damage! DO NOT

over-tighten the lag bolts [A1]. Tighten the lag bolts [A1] only until they

are pulled ﬁrmly against the wall plate [01].

4B-1 4B-2

ø10mm

60mm

Position the wall plate at your

desired height, level the wall plate

and mark the pilot hole locations.

Step

WARNING:

Wall

Anchor

●

Ensure the wall plate is securely fastened to the wall

before continuing on to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Mount the wall plate

[01]

directly onto the concrete surface

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

Solid Concrete or Concrete Block Option

Drill 4 pilot holes using a 10mm

diameter drill bit. Make sure the

depth is not less than 60mm. Never

drill into the mortar between blocks.

Step 5

4B-3

Use the hammer to

knock anchors [A2]

into the wall.

Hang the TV onto the Wall Plate

Wall

Iocking

A1 A2

Install wall plate using lag bolts [A1] and anchors [A2]. Be

sure the anchors [A2] are seated ﬂush with the concrete

surface. Tighten the lag bolts [A1] only until they are pulled

ﬁrmly against the wall plate. DO NOT over-tighten the lag

bolts [A1].

Tabla de contenidos

Otros manuales de Soporte de TV de Pipishell

Pipishell

Pipishell PIMTK1 Manual de usuario

Pipishell

Pipishell PISM02 Manual de usuario

Pipishell

Pipishell PIMFK1 Manual de usuario

Pipishell

Pipishell PIMT4 Manual de usuario

Pipishell

Pipishell PILFK Series Manual de usuario

Pipishell

Pipishell PISF1 Manual de usuario

Pipishell

Pipishell PILTK4 Manual de usuario

Pipishell

Pipishell PIMF3 Manual de usuario

Manuales populares de Soporte de TV de otras marcas

Ergotron

Ergotron Neo Flex Cantilever UHD Manual de usuario

StarTech.com

StarTech.com FPCEILBTB Manual de usuario

VonHaus

VonHaus 05/038 Manual de usuario

Techlink

Techlink ECHO TV Manual de usuario

Sandstrom

Sandstrom SSTVMC12X Manual de usuario

Sony

Sony SU-WL700 Guía

ICW

ICW SCACC18 Manual de usuario

LG WM-L640V Manual de usuario

Gembird

Gembird WM-65ST-01 Manual de usuario

ERARD

ERARD FiTUP XXL 035320 Manual de usuario

PEERLESS

PEERLESS PLCK-1 Guía

Kanto

Kanto RCF180 Manual de usuario

GEM

GEM GEM GP001 Manual de usuario

Gladiator Joe

Gladiator Joe GJ0A0053 Manual de usuario

Vivotek

Vivotek AM-105 Manual de usuario

Vivo

Vivo VESA STAND-VAD1B Manual de usuario

AmazonBasics

AmazonBasics B07QG3LMG4 Manual de usuario

Secura

Secura QLF210 Manual de usuario