Pioneer SC-LX701 Guía de instalación

Basic

Manual

Hookup

Step1: Speaker Layout ........................................................... 3

Step2: Connect the Speakers ............................................... 10

Step3: Connect the TV ......................................................... 12

Step4: Connect the AV Components .................................... 14

Step5: Multi-zone Connection ............................................... 18

Step6: Connect Other Cables ............................................... 21

Setup

Step7: Power On & Initial Setup ........................................... 22

HDMI Setup .......................................................................... 23

Playback

Basic Playback ..................................................................... 24

Network Functions ................................................................ 25

Others ................................................................................... 27

Part Names

Front Panel ........................................................................... 30

Rear Panel ............................................................................ 31

Remote Controller ................................................................ 33

Display .................................................................................. 33

This manual includes information needed when starting up and also

instructions for frequently used operations. The "Advanced Manual" is

available on the internet with details about the playback features/

listening modes/settings details, specifications, and troubleshooting.

The Advanced Manual is created in a format that makes it easy to read

on a PC or Smartphone.

http://www.pioneer-audiovisual.com/manual/sclx801701/adv/en.html

Advanced Manual found here

> Before start > Hookup > Setup > Playback > Part Names

SC-LX801

SC-LX701

AV RECEIVER

RECEPTEUR AV

SN29402396B_SC-LX801_701_BAS_En_171027.book 1 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

What's in the box

1. Main unit 2. Remote controller (RC-927R)

×1, Batteries (AAA/R03) ×2

3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1

6. Power cord ×1

Glossary

Dolby Atmos

This unit supports playback in the Dolby Atmos format which provides 360e sound placement. Unlike existing

surround systems, Dolby Atmos doesn't rely on channels, but rather enables the accurate placement of sound

objects that have independent motion in a three-dimensional space with even greater clarity. Dolby Atmos is an

optional audio format on Blu-ray Discs and achieves a three-dimensional sound field by introducing a sound field

above the listener.

ARC

The ARC (Audio Return Channel) feature transfers TV audio signals via HDMI cable so that you can play the

audio from the TV through this unit. Connection to an ARC compatible TV is complete with one HDMI cable. Refer

to the instruction manual for your TV to see if it supports ARC. (



P12)

HDMI CEC functionality

Control features such as linking input switching with the input selector and players conforming to the CEC

standard, switching audio output and volume using the remote controller of a CEC-compliant TV, and

automatically switching this unit to standby when the TV is turned off (



P14)

HDMI Standby Through

Video and audio signals from AV components can be transmitted to the TV even if this unit is in standby (



P14)

CAUTION: Connect speakers with 4 Ω to 16 Ω impedance. The power cord must be connected only after

all other cable connections are completed. We will not accept responsibility for damage arising from the

connection of equipment manufactured by other companies.

SN29402396B_SC-LX801_701_BAS_En_171027.book 2 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

Step1: Speaker Layout

＊1

＊2

＊3

＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e

12 Front Speakers

3Center Speaker

45 Surround Speakers

6Powered Subwoofer

78 Surround Back Speakers

7.1-Channel System

Front speakers output front stereo sound and a center

speaker outputs center sound such as dialogs and vocals.

Surround speakers create back sound field. Powered

subwoofer reproduces bass sounds and creates rich

sound field.

Surround back speakers improve the sense of

envelopment created by the back sound field and provide

a more realistic sound field. Furthermore, by installing

surround back speakers, you can select the Dolby Atmos

listening mode, which realizes the most up-to-date 3D

sound, when the input format is Dolby Atmos.

The front speakers should be positioned at ear height,

while the surround speakers should be positioned just

above ear height. Center speaker should be set up facing

the listening position.

Placing the powered subwoofer between the center

speaker and a front speaker gives you a natural sound

even when playing music.

The optimal positioning is for surround back speakers to

be at ear height.

0If you are including surround back speakers in the

setup, surround speakers are required.

Go To "Hookup" (



P10)



SN29402396B_SC-LX801_701_BAS_En_171027.book 3 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

＊1

＊2

＊3

3´ (0.9 m)

or more

3´ (0.9 m)

or more

＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e

9: Height Speakers

Front High Speakers

Rear High Speakers

Height Speakers;

Front High Speakers/

Rear High Speakers

These are types of height speakers. Furthermore, by

installing height speakers, you can select the Dolby

Atmos listening mode, which realizes the most up-to-date

3D sound including overhead sounds, when the input

format is Dolby Atmos.

Front high speakers or rear high speakers should be

situated at least 0.9 m higher than the front speakers.

Front high speakers should be situated directly above the

front speakers and the distance between the rear high

speakers should match the distance between the front

speakers. Both should be set up facing the listening

position. Note that with height speakers you can install up

to two sets; Height 1 Speaker and Height 2 Speaker.

Go To "Hookup" (



P10)



SN29402396B_SC-LX801_701_BAS_En_171027.book 4 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

＊1

＊2

＊3

＊1: 30e〜55e, ＊2: 65e〜100e, ＊3: 125e〜150e

9: Height Speakers

Top Front Speakers

Top Middle Speakers

Top Rear Speakers

Height Speakers;

Ceiling Speakers

These are types of height speakers. Furthermore, by

installing height speakers, you can select the Dolby

Atmos listening mode, which realizes the most up-to-date

3D sound including overhead sounds, when the input

format is Dolby Atmos.

Fit top front speakers on the ceiling forward of the seating

position, top middle speakers on the ceiling directly above

the seating position, and top rear speakers on the ceiling

behind the seating position. The distance between each

pair should match the distance between the two front

speakers. Note that with height speakers you can install

up to two sets; Height 1 Speaker and Height 2 Speaker.

0Dolby Laboratories recommends placing this type of

height speakers to obtain the best Dolby Atmos effect.

Go To "Hookup" (



P10)



SN29402396B_SC-LX801_701_BAS_En_171027.book 5 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

＊1

＊2

＊3

＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e

9: Height Speakers

Dolby Enabled Speakers (Front)

Dolby Enabled Speakers (Surround)

Dolby Enabled Speakers (Surround Back)

Height Speakers;

Dolby Enabled Speakers

(Dolby Speakers)

These are types of height speakers. Dolby enabled

speakers are special speakers designed to face the

ceiling so that sound is heard after bouncing off the ceiling

so that sound appears to be coming from overhead.

Furthermore, by installing height speakers, you can select

the Dolby Atmos listening mode, which realizes the most

up-to-date 3D sound including overhead sounds, when

the input format is Dolby Atmos.

Place them either above the front speakers or above the

surround speakers or surround back speakers. Note that

with height speakers you can install up to two sets; Height

1 Speaker and Height 2 Speaker.

Go To "Hookup" (



P10)



SN29402396B_SC-LX801_701_BAS_En_171027.book 6 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

＊1

＊2

＊3

Speaker B Speaker B

＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e

Speaker B System

Apart from the main speaker system (Speaker A System),

you can also connect another system of front speakers to

be the Speaker B System. When you do so, you can

switch the same audio to output from A, B, or A+B. Switch

with "Speakers" in AV Adjust (



P28). Note that sound is

not output from the surround back speaker when A+B is

selected.

Depending on the configuration of the main speaker

system, it is possible to connect a Speaker B System

supporting Bi-Amping (



P8) to improve quality of the

bass and treble.

Go To "Hookup" (



P10)

Go To "Hookup" (



P11)



SN29402396B_SC-LX801_701_BAS_En_171027.book 7 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

＊1

＊2

＊3

＊1: 22e〜30e, ＊2: 90e〜120e, ＊3: 135e〜150e

12 Front Speakers (Bi-Amping)

3Center Speaker (Bi-Amping)

45 Surround Speakers (Bi-Amping)

Bi-Amping the Speakers

It is possible to connect front speakers, a center speaker,

and surround speakers supporting Bi-Amping to improve

quality of the bass and treble. The effects and placements

for speakers are the same as for a system that doesn't

use Bi-Amping speakers.

The following shows the combinations you can connect

with Bi-Amping speakers.

– Front speakers only

– Front speakers and center speaker

– Front speakers and surround speakers

Except for a case where only the front speakers are Bi-

Amping connected, when multiple speakers are combined

in a Bi-Amping connection, the maximum speaker

configuration is 5.1 ch.

Go To "Hookup" (



P11)



SN29402396B_SC-LX801_701_BAS_En_171027.book 8 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

Speaker combinations

In any of the combinations, up to two powered subwoofers can be connected.

Points to note with speaker combinations

＊1: It is not possible to use Speaker B, Bi-AMP, and ZONE speakers at the same time. However, with 2.1

ch to 7.1 ch, it is possible to use Bi-AMP (FRONT) and ZONE 2 speakers at the same time.

＊2: You can also use Bi-Amping connections with Speakers B.

＊3: If you have not connected ZONE 3 speakers in another room but have only connected ZONE 2

speakers, connect the ZONE 2 speakers to the HEIGHT 1 jacks. However, if you want to use at the

same time as Bi-AMP (FRONT), connect the ZONE 2 speakers to the HEIGHT 2 jacks.

＊4: If front speakers are to be Bi-Amping connected, height speakers need to be connected to the

HEIGHT 2 jacks.

＊5: ZONE 2 speakers need to be connected to the HEIGHT 1 jack, ZONE 3 speakers need to be

connected to the SURROUND BACK jacks, and height speakers need to be connected to the

HEIGHT 2 jacks.

＊6: This unit consists of a 9 ch amplifier, so when using a Bi-Amping connection for the front speakers,

use an RCA cable to connect the power amplifier to the PRE OUT HEIGHT 2 jacks, then connect the

height speakers to the power amplifier.

＊7: This unit consists of a 9 ch amplifier, so with this combination use an RCA cable to connect the power

amplifier to the PRE OUT SURR BACK jacks, then connect the surround back speakers to the power

amplifier.

HEIGHT 1/HEIGHT 2

When connecting 2 sets of height speakers, the height speaker combinations you can choose are as follows.

– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High

– Height 1 Speaker: Front High, Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled

Speaker (Surround)/Dolby Enabled Speaker (Surround Back)

– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top

Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)

When connecting only one set of height speakers, select one type of height speakers from the types

available.

Speaker

Channels FRONT CENTER SURROUND SURROUND

BACK HEIGHT 1 HEIGHT 2 SP B

＊1

(Speaker B) Bi-AMP

＊1

ZONE 2

＊1

(



P19)

ZONE 3

＊1

(



P20)

2.1 ch

＊2

FRONT

3.1 ch

＊2

FRONT,

FRONT/CENTER

4.1 ch

＊2

FRONT,

FRONT/SURROUND

5.1 ch

＊2

FRONT,

FRONT/CENTER,

FRONT/SURROUND

6.1 ch

＊2

FRONT

＊3

7.1 ch

＊2

FRONT

＊3

2.1.2 ch

＊4

FRONT

＊5

3.1.2 ch

＊4

FRONT

＊5

4.1.2 ch

＊4

FRONT

＊5

5.1.2 ch

＊4

FRONT

＊5

6.1.2 ch

＊6

FRONT

7.1.2 ch

＊6

FRONT

4.1.4 ch

5.1.4 ch

6.1.4 ch

＊7

7.1.4 ch

＊7

SN29402396B_SC-LX801_701_BAS_En_171027.book 9 ページ２０１７年１０月２７日　金曜日　午前９時１７分

> Before start > Hookup > Setup > Playback > Part Names

Step2: Connect the Speakers

3/8˝

(10 mm)

Speaker B

OR ᴧᴧᴧᴧ

1 Speaker cable, 2 Subwoofer cable

Standard Connections

Refer to the illustration to connect the speaker system.

＊Depending on the combination of speakers, you may need to

connect to other jacks. See "Points to note with speaker

combinations" (P9) for details.

Make sure the exposed wires of the speakers do not stick out of

the speaker terminals when connecting. If the exposed wires of

the speakers touch the rear panel or the + and – wires touch each

other, the protection circuit will be activated.

SN29402396B_SC-LX801_701_BAS_En_171027.book 10 ページ２０１７年１０月２７日　金曜日　午前９時１７分

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Receptor estéreo de Pioneer

Pioneer

Pioneer DMH-W4600NEX Manual de uso y cuidado

Pioneer

Pioneer AVH-X2800BT Manual de usuario

Pioneer

Pioneer VSX-934 Manual de usuario

Pioneer

Pioneer LX-880 Manual de servicio

Pioneer

Pioneer SX-20-K Manual de usuario

Pioneer

Pioneer SX-1080 Manual de usuario

Pioneer

Pioneer DMH-Z5290BT Manual de usuario

Pioneer

Pioneer Elite VSX-LX102 Guía de instalación

Pioneer

Pioneer XR-VS88 Manual de usuario

Pioneer

Pioneer VSX-1130-K Manual de usuario

Pioneer

Pioneer VSX-D510 Manual de usuario

Pioneer

Pioneer DMH-A241 BT Manual de usuario

Pioneer

Pioneer VSX-D606S Manual de usuario

Pioneer

Pioneer AVH-X390BT Manual de usuario

Pioneer

Pioneer Super Tuner III D AVM-P9000 Manual de usuario

Pioneer

Pioneer AVH-Z5250BT Manual de usuario

Pioneer

Pioneer AVH-280BT/XNUC Manual de usuario

Pioneer

Pioneer SX-2300 Manual de usuario

Pioneer

Pioneer VSX-5300 Manual de usuario

Pioneer

Pioneer AVH-521EX Manual de usuario

Pioneer

Pioneer ELITE VSX-LX505 Manual

Pioneer

Pioneer Elite G-Clef SX-A9MK2-K Manual de usuario

Pioneer

Pioneer SX-1500TD Manual de usuario

Pioneer

Pioneer SX-40 Manual de usuario

Manuales populares de Receptor estéreo de otras marcas

Marantz

Marantz CINEMA 70S Manual de usuario

Kenwood

Kenwood KMDX92 Manual de usuario

Yamaha

Yamaha RX-830 Manual de usuario

Yamaha

Yamaha RX-750 Manual de usuario

Denon

Denon AVR-1311 Manual de usuario

Denon

Denon AVR-S760H Manual de usuario

Denon

Denon AVR-X7200W Manual de usuario

Sony

Sony XAV-1500 Manual de usuario

Radio Shack

Radio Shack DX-399 Manual de usuario

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Manual de usuario

Yamaha

Yamaha MusicCast TSR-5B3D Manual de usuario

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Manual de usuario

Sony

Sony STR-DG500 - Multi Channel Av Receiver Manual de usuario

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Manual de usuario

Sherwood

Sherwood S-2660CP Manual técnico

Sony

Sony STR-K790 - Lifier Manual de usuario

Denon

Denon DRA-697CI Manual de usuario

SMART-AVI

SMART-AVI HDX-PRO Series Manual de usuario