PICO MobileCinema i70 Manual de usuario
User’s Manual
1
Welcome
Thank you very much for purchasing this product. Before you start, you are
recommended to read this manual step by step to obtain the best results with your
new Pico projector. We wish you enjoy it.
About the product
MobileCinema i70 is an ultra-light and compact Pico Projector with an embedded
Wi-Fi interface to mirror any contents from notebook, tablet or smartphone easily
and without cable clutter. Connect via the Airplay or Miracast (Screen Mirroring)
function from iOS or Android device, or the HDMI port for a variety of other
playback devices. The DLP chip in use, known from large cinema projectors,
provides rich colors and high contrasts. Thanks to the built-in rechargeable battery,
MobileCinema i70 can be used independent of any power source for real mobile
presentations and movie nights.
Safety Notice
1. Keep the device and packaging materials out of the reach of infants and
children.
2. Avoid subjecting the power adapter and other contacts to dripping or splashing
water and dry your hands before you use it. Do not place objects filled with
liquids such as vases, etc. on or near the device.
3. Make sure that the used power outlet is always readily available and never
hidden. In case of emergency, use the power adapter to separate the device
from the power network.
4. Keep your device away from all flames such as candles and do not set them up
in the vicinity of the device.
5. Keep the unit at least 10 cm away from other objects. Make sure the ventilation
is not covered by newspapers, tablecloths, curtains, etc.
6. For your own safety, do not use the projector during thunderstorms or lightning.
7. Relative Humidity is 20% ~ 80%, non-condensing.
8. The battery is integrated with the device. Do not dissemble and modify. The
battery should be replaced by an authorized service center only.
9. Ensure that the ambient room temperature is within 5 ~ 35°C.
10.Wait before using if the device has been moved from a cold location into a
warm one. Any condensation that has formed may in certain circumstances
destroy the device. As soon as the device has reached room temperature it can
be used without risk.
11.Handle the product with care. Avoid contact with sharp objects. Keep device
away from metallic objects.
ENGLISH
ENGLISH
User’s Manual
2
projector
12.Place the projector on a flat surface. Any collision or falling to the ground is
likely to damage the product.
13.Do not drop or disassemble the product otherwise the warranty voids. Opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to an authorized service center.
14.Use only the accessories supplied by the manufacturer.
15.Both product and user’s manual are subject to further improvement or
supplement without further notice.
Care and Safety Information for Pico Projectors
1. Avoid facing directly into the projector’s lens.
2. During the operation, this product may heat lightly,
which is normal.
3. The device should not be used in a very dusty
environment. Dust particles and other foreign
objects may damage the unit.
4. Do not expose the device to extreme vibrations. It may damage the internal
components.
Notice for Long-time Projection
The built-in battery supports approximately 80 mins of projection. For long time
projection, you are recommended to use AC adapter.
When the battery capacity icon is displayed , the battery is too weak to stay in
operation. You need to charge the product when the icon is showed
The CE marking certifies that the product meets the main
requirements of the European Parliament and Councils directives
1999/5/EC on information technology equip¬ment, regarding safety
and health of users and regarding electromagnetic interference.
The declaration of compliance can be consulted on the site
www.aiptek.de .
Avoid Hearing Damage:
Listening at high volume for a long period
of time could cause damage to your ears.
User’s Manual
3
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation
is subjected to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in residential
installations. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television
equipment reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Move the equipment away from the receiver.
- Plug the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/television technician for additional
suggestions.
For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
This device and it's antennas(s) must not be co-located or operating in conjunction
with any other antenna or transmitter except in accordance with FCC
multi-transmitter product procedures.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
All cables used to connect peripherals must be shielded and grounded. Operation
with cables connected to peripherals that are not shielded and grounded may
result in interference to radio and television reception.
You are cautioned that any change or modifications to the equipment not expressly
approved by the party responsible for compliance could void your authority to
operate such equipment.
ENGLISH
ENGLISH
User’s Manual
4
Packaging: The presence of the logo (green dot) means that a
contribution is paid to an approved national organization to improve
package recovery and recycling infrastructures. Please respect the
sorting rules set up locally for this kind of waste.
Batteries: If your product contains batteries, they must be disposed
of at an appropriate collection point.
The crossed-out waste bin stuck on the product means that the product
belongs to the family of electrical and electronic equipment. In this
respect, the European regulations ask you to dispose of it selectively;
• At sales points in the event of the purchase of similar equipment.
• At the collection points made available to you locally (drop-off center, selective
collection, etc.).
In this way you can participate in the re-use and upgrad¬ing of Electrical and
Electronic Equipment Waste, which can have an effect on the environment and
human health.
The paper and cardboard packaging used can be dis¬posed of as recyclable
paper. Have the plastic wrapping recycled or dispose of it in the non-recyclable
waste, depending on the requirements in your country.
User’s Manual
5
Package content
• Pico Projector
• HDMI Cable
• USB Cable
• User Manual Guide
Focus
Wheel
Speaker
DC-In
LED
HDMI Connector
USB Connector
Power/Mode
Ventilation
Projection Lens
Product Overview
ENGLISH
ENGLISH
User’s Manual
6
Connect one micro USB end of the USB cable and the other
USB plug end to Mobile phone power adapter or PC /
Notebook for charging.
** The Product can be fully charged around 5 hrs from empty.
Charging the product
Connect one micro USB end of the mobile phone USB
cable to the mobile phone and the other USB plug end to
the product USB port on the side and press power key ,
then the mobile phone battery will be charged automatically.
Charging the mobile phone (Power bank function)
User’s Manual
7
Press the power key for 8 sec., the projector will be turned
on.
Long-Press the power key for 8 sec. in operation, the
projector will be turned off.
Turning on/off the Projector
Adjust the focus by using the focus wheel on the bottom side to
get a sharper image
Adjusting the Focus
Press the power button shortly, it will change connection
mode between iOS and Android, then follow the screen
instruction to connect your phone to project.
Change mode
After connecting with the projector, entering the IP
address:192.168.49.1 in the browser in mobile phone can
check the setting of projector.
Setting
ENGLISH
ENGLISH
User’s Manual
8
Android Mode
HDMI cable A to C type (mini type) connection between
the source device and projector:
Projecting the files from PC/NB or other media
devices
iOS mode
Wi-Fi
Wi-Fi
I70-XXX
Select Network
Apple
GAC
Choose
“I70-XXX”
Password:
12345678
AirDrop AirPlay
Open
“Control Center”
to tap“AirPlay”
AirPlay
iPhone
I70-XXX
Mirroring
With AirPlay Mirroning you can send ever-
thing on your ipad s display to anapple TV.
wirelessly.
‘
Choose
“I70-XXX”
then tap Mirroring
The Wireless Mirror Projection is
through Wi-Fi Direct protocol.
It can project most of Android &
Windows devices via Miracast.
Link to “I70-xxx” in
“Wireless Display”,
“WLAN Display”,
“Screen Sharing”,
“Screen Projection”,
Wi-Fi Direct” etc.
NOTICE
Settings
Network and connection
Mobile network
WLAN
Bluetooth
Other connections
Choose
“Other connections”
then tap
“Wireless display”
Wireless display
Open wireless display
CERTIFICATION
Android_4880
Android_9137
I70-XXX
Choose
“I70-XXX”
User’s Manual
9
The projector still can’t be
turned on after 10 seconds
of waiting.
Ensure the battery is fully
charged.
The temperature of the
projector’s surface is warm.
It is normal for this projector
to generate moderate heat
during operation.
The projecting image is too
blurry.
1. Adjust the focus by using
focus wheel.
2. Check if the projection
lens is clean or not, clean
it if dirty.
The projector does not work
when connecting to a
notebook PC.
1. Check if the HDMI cable
is plugged correctly.
2. Make sure the PC has
been switched to projector
display.
Troubleshooting
Symptom Check Point
ENGLISH
ENGLISH
User’s Manual
10
Product specifications
Optical Technology DLP
Light Source RGB LED
Resolution 854 x 480 Pixels (WVGA)
Luminous Flux Up to 70 lumens
Projection Image Size 14”~80”(36~203cm)
Projection Distance 15”~87 ”(38~221cm)
Wireless Standard 802.11b/g/n, 2.4G+5G dual band
Connection Wi-Fi, HDMI
Power Input 5V / 2A
Power Output 5V / 1A
Battery Type Embedded 1900 mAh,
Li-polymer rechargeable battery
Operation Temperature 5 °C ~ 35 °C
Dimension (L x W x H) 85 mm x 85 mm x 16.5 mm
Weight 132 g
Package Content
* All specifications are subject to change without notice.
Pico Projector, HDMI cable,
USB cable, User Manual
Item Description
Tabla de contenidos
Idiomas:
Otros manuales de Proyector de PICO
PICO
PICO PK100 Manual de usuario
PICO
PICO CVFU-E282 Manual de usuario
PICO
PICO LED Projector Manual de usuario
PICO
PICO GENIE M400 PRO Manual de usuario
PICO
PICO Pocket Projector Manual de usuario
PICO
PICO MPP-14001 Manual de usuario
PICO
PICO PK100 Manual de usuario
PICO
PICO Optoma EP-PK-101 Manual de usuario
