
English
INTENDED USE
►The product shall be used to evacuate air (non liquids) from a volume to create
vacuum for gripping, holding and processes
►The product can be used to blow air for surface cleaning and to remove vacuum
from a volume
►The product shall be used in environments within the product’s specications and
certications
►The product shall be installed in accordance to installation instructions
►The product shall be maintained in accordance to maintenance instructions
►Troubleshooting shall be conducted in accordance to manual instructions
►The safety instructions shall be followed
►For professional use only.
MISUSE
►Result from readily predictable human behavior.
►The product shall not be used to evacuate liquids.
►The product shall not be used to evacuate solid content without the use of lter.
►The product shall not be used in a fully closed compartment (non ventilated) if not
exhaust is piped away.
►The product shall not be used as stand alone safety system to fulll international
►lifting norms.
►The exhaust shall not be restricted or blocked.
►The vacuum and exhaust port shall not simultaneous be blocked when unit is
generating vacuum.
►The product shall not be used to create vacuum or blow for other purposes than
the intended use.
►Vacuum and exhaust air can cause severe injuries, keep hands, legs, hair and
eyes away from vacuum inlets and exhausts.
►Do not install or operate you product if damaged.
►Do not operate the product if compressed air line is not properly secured, loose
compressed air lines can cause severe injuries.
►Using compressed air pressure and/or electrical voltage outside specication can
cause severe damage due to performance loss.
►Blow-off functions or ejector exhaust shall not be used to pressurize sealed com
partments such as cylinders and/or tank-volumes.
piPUMP 23
5